insane process to take the headlight assembly out, like you said lol. in older GM truck its 2 bolts that can be turned by hand, so much easier. that truck next to this GM SUV is probably 10x easier to work on
@HouseDoctorRay Жыл бұрын
True! I love my '06. As long as the frame holds up I'm keeping it.
@kupa182 жыл бұрын
Dude. Thanks. I needed this I just can’t pay $1,000 for a new headlight
@HouseDoctorRay2 жыл бұрын
You and me both brother. It's tedious getting it apart so take your time. Keep putting it back in the oven to keep it warm. Good luck!
@pEwTeRsS99 Жыл бұрын
Not all heroes wear capes 🙌
@HouseDoctorRay Жыл бұрын
Thanks Tony.
@hgvenom Жыл бұрын
03:00 was that sarcasms... XD
@HouseDoctorRay Жыл бұрын
It's so dumb. On my Sierra I just unclip a rod and the headlight comes right out.
@ryanhowe98502 жыл бұрын
Going to attempt this now hope it works !! I have the same year & same light issue
@HouseDoctorRay2 жыл бұрын
I saw another one last week. Same side was out. Just weird. Just go slow taking the light apart. Keep putting it back in the oven as needed.
@jthomas7631 Жыл бұрын
You the man Ray ! How often do you change your oil and ATF ? Any other major repairs on the Yukon thus far?
@HouseDoctorRay Жыл бұрын
Oil 3,000-5,000 miles Transmission 50,000 kzbin.info/www/bejne/b2naqHR5lpx-jKssi=Ai2T8Tm_OP1_cmaj I did have a fuel line go and the vacuum pump at 150K kzbin.info/www/bejne/gGeTqoitmp6DY6ssi=b-H7nL3uWCvPOyB7
@johnnyrockets35902 жыл бұрын
Do you know what’s what on that board? I have an issue with my passenger side headlamp but it’s with the turn signal. There’s moisture in the assembly so I’m assuming it’s corroded too.
@HouseDoctorRay2 жыл бұрын
Could be corrosion inside the socket for the headlight bulb. Check out GMtruckclub.com. A lot of very helpful people on the forums.
@mrcrux2138 ай бұрын
❤ Love it!!!
@MalikIdreesMasood2 жыл бұрын
PCB looks absolutely fine to me also how can you say without testing it? does not make sense to me, IDK how no one spotted it...
@awakentruth1116 Жыл бұрын
You take the entire front clip off, and pull the light before advising to check the fuses at 3:40... Lol 😂 AHHH SHYT, IT'S A BAD FUSE! Now I gotta put everything back together 😢 😢😢😢
@HouseDoctorRay Жыл бұрын
It's good practice. Always check the easy stuff first.
@traynham Жыл бұрын
So this works for a Tahoe?
@HouseDoctorRay Жыл бұрын
Yes but the fuel line may be different because mine is an XL.
@Faris0473 жыл бұрын
Thank you it's worked for me
@HouseDoctorRay3 жыл бұрын
Glad you were able to get it done.
@aguilar51858 ай бұрын
Is it possible to just buy a new board?
@HouseDoctorRay8 ай бұрын
There are companies that will rebuild your light for you. I was not able to find the board, only the complete light.
@BryanHarris-m5l7 ай бұрын
Thx
@travisbw Жыл бұрын
Where is the ballast located?
@HouseDoctorRay Жыл бұрын
Not sure what you mean.
@claytonkeyes7041 Жыл бұрын
Amazing
@HouseDoctorRay Жыл бұрын
Thanks Clayton
@henryguerra20086 ай бұрын
My lights are realy low and the tail lights not work any body not Wy
@HouseDoctorRay6 ай бұрын
Poor design. Check the link in the video description for a fix of the taillights.
@michaelgreene5525 Жыл бұрын
Impressive
@HouseDoctorRay Жыл бұрын
Thanks Michael
@frutbum2 жыл бұрын
Nice
@HouseDoctorRay2 жыл бұрын
Thanks
@hailymanns73824 ай бұрын
Bought 2 2016 headlights for$ 290 brand new
@HouseDoctorRay4 ай бұрын
Where? I've already had to solder both taillights once and one is falling again.
@chelseaclark8251 Жыл бұрын
Mine only works sometimes 😢
@HouseDoctorRay Жыл бұрын
That's how it starts. There are companies that will rebuild them but you have to mail yours to them.
@edmonddantes9975 Жыл бұрын
Didn’t work for me.
@HouseDoctorRay Жыл бұрын
Sorry dude. I would double check those solder connections. They're tricky. Also double check the fuse.
@CaseyE-bn3vk Жыл бұрын
Where is the fuse located for the daytime running lights?
@TornGucci2 жыл бұрын
I have some headlights you can buy off me for $1k each 😂 how many you need?
@HouseDoctorRay2 жыл бұрын
I'm surprised with all these things on the road there isn't an aftermarket option at a reasonable price.