Spraying SPI Epoxy Primer on Project EgoBruise's Engine Bay - Episode 20

Our 1979 Foxbody coupe EcoBoost project car finally gets a coat of Primer. This is the base coat before body filler and means we get to start BUILDING A CAR!
On this episode we complete the prep work, put on Ospho and lay down Southern Polyurethane Epoxy Primer with my Eastwood Concourse LT100 gun.
Gun:
www.eastwood.com/concours-lt-...
Primer:
www.shopvrs.com/us/southern-p...
DeVilbiss Cups:
www.eastwood.com/dekups-24-oz...
DeKups Adapter:
www.eastwood.com/dekups-adapt...

[@TOMVUTHEPIMP]

To cover the floor I buy cheap king size flat sheets at Wal Mart for like $10 a pop and lay a few down. I like you can pick them up and toss them down quick. No messing with rolls of paper and tape if you don't want.

[@firefightergarcia]

Great job. Nothing feels better then doing it yourself

[@tonybattaglia6358]

My hats off to you! Trying to do this type of project in a garage is really tuff, I've been doing it all my life, like fighting with one hand behind your back! Anyway, great video, best of luck with your project!

[@jasonwilliams1705]

Looks good from N.C.!!!!! Awesome work ( Progress) on the coupe/ notch . I dig it ... and LOVE the 86, Thank you for all the effort and time you put in to these videos.

[@kennethelliott2267]

Man guy showed me to put water on ur floor before spraying and it sweep right away when the water dries or you push the water out when ur done. Great job in my book!

[@burtzel27]

Looks good! Happy to see this project moving along. Keep up the good work and of course, the vids!

[@anthonyl9566]

Looks great!

[@marcuswhite1403]

SPI Epoxy is some good stuff. I've been using it for a while

[@johndoe-zb8bm]

Dang Mike you are truly killing it,I need to do this also! You Ballin brother, I'm happy for you my man! Looking good as usual!👈💯🔥

[@Joe-zt2us]

Man i learn so many little details from you like removing the winshield trim brackets. Hope ya get bizzzy on that 79 and I can learn some more. I am restoring a 79 ghia and it is nice to see you do some of the things I will have to before me.

[@willsachs]

Great video, thank you for sharing! I'm currently redoing my 1986 convertible which was my first car back in the 90's. Just finished the sn95 conversion with a good bit of reference from your videos. Body work is taking a while as I am deleting all the molding lines on the car, including the bumpers. Fun stuff!

[@modelnutty6503]

nice project, keep going, I mean clean and epoxy inside and out as much as possible to the whole underside of the beast. little eco-boost in there should be fun.

[@toddenglert4815]

Injoyed video very educational thanks bro

[@elementl1166]

Just found your channel - sprayed my ‘93 Cobra in my garage in 2020 and yeah epoxy primer is nasty stuff. You really need to fully isolate everything you don’t want it to land on because it will do just that and it will be there forever! Great job tho!

[@Ronin8500]

I think your videos are pretty rad and informative!! I like that you're down to earth and not some punkass snob!! I have a '69 Torino GT with the original 351W block and bottom end. I bought it last quarter of 2020. It has TFS heads and Torker 2 intake with a 750cfm 3310 Holley 4bbl. Points were converted to Pertronix and a full length longtubes to 3" all the way back. Red Holley electric fuel pump. I'm debating the fuel cell. I'm not a fan of the stock fuel fill location. I also have an original 1990 5.0 5speed notch bought here in Tampa. I bought it in 2000 and it was my daily driver until probably 2010? Both need some attention and I appreciate that you have tackled some of the upgrades I gave considered for each. I've also got a 2004 Ford F150 FX4. I bought it new in 2004. First and last brand new vehicle, I ever buy!!

[@johndoe-zb8bm]

Card board quality, lmao! You crazy my man. Jr is growing up also,He is going to be a FORD FAN FOR SURE,lol!

[@cali72283]

I’m in the same process I hope I can get half as nice as yours

[@emilfrias4991]

It's good to see people doing their own restorations; build, not buy.

[@topgunpressurecleaning8930]

I purchased concrete & metal prep from home depot. It's like 15 dollars for one gallon.

[@Chopski64]

I avoided SPI epoxy for a specific reason. It doesn't like phosphoric acid (ospho) unless it's been neutralized. Hopefully you don't have issues with paint peeling off.