How Much it Cost to Cummins Swap this F350

[@WestenChamplin]

If you got any questions on the Cummins swap that I may have missed just ask. Also if you want to go back and watch the full series playlist in the description.

[@PrivateBeeBop]

Will you ever sell it?!? I want to buy a cummins swapped ford

[@nickherrman1222]

Brandon Petek I doubt he will

[@timallred6789]

I have a question i have a 04 6.0 reguler cab f550 has a shit ton of miles on it mid 500k im thinking of cummins swap but the 6.0 is my main work horse how long did it take you like hours if i was to start and not stop till its done

[@wyattessary5663]

How many hours??

[@Spaude123]

how many labor hours do you have putting the motor in it?

[@tamedgoat3920]

Take it to a ford dealership for an oil change and film their reactions

[@barry4765]

Like so he can see it

[@stewitruck]

This would be funny!

[@stacyboots1818]

This cummins came out of an F 450 originally so it shouldn't hurt their feelings too much.

[@barry4765]

Stacy Boots no it came out of an f700 md truck😂

[@stacyboots1818]

My bad it's still a ford!

[@stevebrantley5474]

9:20 - Engine: $1,500. Parts: $3,800. Driveline & Misc. = $655. Minus truck cost. $5955 Total. You're welcome.

[@maxpudlo]

Not all heros wear capes

[@Dailyscwobble]

Steve Brantley thank you

[@JayElement13]

Cummins are gutless when hauling heavy shit

[@jasonzerna9369]

@@JayElement13 Not if you how to turn a wrench...

[@noblekitty]

What about labor cost?

[@jessejohnson3138]

I have an f350 dually. It's studded, Bullet proofed, egr deleted. It has a 6 inch lift it runs great I love my 6.0. Great video brother

[@kevinrundle3167]

Weston , you are a great young man. We need more like you in this world! I thoroughly enjoy your videos. Keep up the great work 👍

[@nrambousek3]

Mr, Champlin, I want to thank you for everything you put into your videos. Its because of the laughs and cool projects you do that got me into the diesel industry. I have a tempermental 6.0 of my own and whenever im down on my luck about it I just watch a couple of your videos and im back to work laughing my behind off. Keep doing what you're doing brother!

[@trudyandescampbell8802]

I love this comment!! 😘

[@dallashorrocks5306]

As a guy that owns a Ford, I think this was freaking awesome! I own an 08 Ford with the 6.4 engine and haven't had problems with it. But if given the chance I would love to do something like this, super cool stuff man!

[@raulpena2412]

I dont get why people dislike this video he is such a positive person who deserves all likes possible.

[@trudyandescampbell8802]

😙😘😇

[@raulpena2412]

Much love man🙏😇

[@Tyler-dz1eu]

Bro your videos are the best this is an underrated channel

[@zachsmith7373]

I agree

[@johanneswarn5488]

Word. Such a nice guy, super enjoyable

[@KW14808]

eez_ it won’t be underrated much longer. It’s growing pretty quickly

[@lukesaid7891]

Bro, he's so optimistic! I love that

[@Robsav-yx6vi]

Luke Said : nailed it ! So refreshing to listen to.

[@benparry5318]

Who are the 90 asshats that downvoted this? Westen cracks me up while impressing me with his ability on the mechanical side. Makes me want to do something like this myself since I had a 2010 F350 Lariat that I loved...except for the gremlins!

[@adamr9515]

Those 6.4 trucks are absolutely gorgeous vehicles

[@bch5513]

Yeah. Too bad they will leave you stranded and VERY light on pocket book.

[@istvanmeissler2238]

Very sharp young guy, can't believe you're just 21. Your channel is doing great and rightly so. Best wishes from Michigan.

[@WestenChamplin]

thanks bud!

[@wesleymadsen4357]

Thanks again for the diesel content. Especially on a Sunday

[@darrylgoben7108]

I love that you could what give the prices of things you paid because it helps us get them a figure in our brain of how much this stuff cost we know you have to make a profit when you sell it and I love that you put the date a video

[@zachsmith7373]

Cool Cummins swap can't wait for more on the dozer

[@tomuchcrazyness9320]

zach Smith I agree, I love those old cats

[@tylercox1875]

Cummins swap the dozer

[@wcm68tn]

There's a dozer project?

[@brianlaroche2040]

May not be the smartest Cooke in the jar. But you are one of the sharper tools in the shed.

[@rjeepster8640]

Omg the smiley face had me laughing like a fool in public. Everyone was looking at me. Ha ha ha love it!

[@bill2070]

Same

[@mrbmd710]

How do u get it to pass smog?

[@MRLSUFAN12]

Badbad Badley isn’t that a cali thing

[@mrbmd710]

Yes It's a Calif thing, but there are a few places like Blythe CA were you don't need smog as long as that where your home address is. It's in the middle of nowhere.

[@rhinowrecker3544]

I drive an F750 flat bed with the 6.7 Cummins in it, with the push button Allison trans... it’s a sweet set up. Only thing that gets that Cummins down is the def system, nothing but junk. Sweet conversion you did, looks great, thumbs up 👍

[@andrewbechtel5821]

How did you learn so much about vehicles so quickly at such a young age? Thanks....love the channel.

[@saintsarecoming13]

The internet is a grand thing. I started learning about it at about 15 and 5 years later I'm a heavy duty tech working for Cummins and before that freightliner.

[@rememberussliberty1822]

Dude you can literally learn anything online..then just apply that knowledge..rinse.. repeat

[@joshring9710]

This guys never worked for cummins and damn sure not freightliner... Saintsarecoming13 your a idiot not a "heavy duty" tech lmfao at this kiddo.

[@Wreckless229]

Josh Ring you don’t know him lmao don’t be a fucking dickhead

[@saintsarecoming13]

@@joshring9710 you don't have to believe me but I do, in fact, work for Cummins. I'm a midrange/heavy duty technician because I don't work on generators, boats, or high horsepower and I work on almost nothing in the way of off highway equipment. I'm ALMOST exclusively truck specific because that's where all of my experience is. And I did, in fact, work for freightliner. But I'm sure some guy on the internet who's never met me would know more about it than I would.

[@thepinkflamingostrikesagai7319]

I am EVER GOING TO do any of this but I subscribed because Wes is a big goof ball.

[@stacyboots1818]

I've always been a fan of anything with a cummins! Great project! Thanks

[@csealand]

Los Angeles loves you, Westin.

[@jevonshepherd2783]

I'm from California not a Ford guy or Dodge but I still love this channel great content keep it up!

[@mr.lowslow7702]

Jevon Shepherd geez I would hide the fact that your from California. Used to live there but I’ve been in Montana last couple of years. Don’t tell anyone your from California.

[@mrbmd710]

What if your a Californian Republican?

[@md9897]

Happy to hear it's going to visit the guys at Power Driven Diesel

[@johnhamilton7124]

Loved the series of this swap. Answers a lot of questions. Keep us up dated.😎

[@kiethwester1563]

I like your Channel , and all your projects . I got a 2000 F-350 , long bed with a 7.3 6speed ,a simple program kit with 4 Setting , towed lot's of things with it from my Case Skidsteer to brother F-250 4x4 long bed on it from up North over 7500 feet to down here in Hot Phoenix .

[@frederikspannerolesen9514]

Could you do a tour of you’re property and all the vehicles and equipment you own?

[@poke85]

Freddy1444 Bk he does have a lot going on on his yard

[@hybridamericandude3575]

I'm sure you mean no harm. That could be perceived as creepy. Some guys will do it. Some guys like to brag, some don't. I sure wouldn't show all my stuff. There's some crazy dudes out there looking to "borrow" things. I do like the idea of a Fummins though!

[@lancekippenbrock5307]

It’s not much but it’s honest work

[@hybridamericandude3575]

mrlpn2 .....It does look like he has a few side projects going on. And he's kind of an entertaining fella. If he decides to show us around that would be kinda cool. I just hope some dirtbag doesn't do something stupid. Westin seems like a nice guy and fun to work with.

[@Fixin-To]

Criminal shopping list?

[@wolfmanrebel874]

I have been planning a rebody swap of 74f250 supercab front and cab w/flatbed over on wrecked ram 3500 24 valve common rail 5spd but I have a whole new set of gears churning butter in my head after watching this

[@carlwilliams8354]

Nice job! My Dad had a 2010 6.4 he sold it before it gave birth.

[@Cole-mc2cy]

God damn your channels taking off like a rocket! Been here since the silver f250 the first truck

[@trudyandescampbell8802]

😇😁😁

[@trishhatesyou]

The people that disliked this video drive cavaliers.

[@stonewall6551]

ford escorts

[@greywolfwalking6359]

StrawberryWine 17 or Ford Pintos!

[@HenauderTitzauf]

The dislikes have what the world calls an LS syndrome, and it’s incurable, just like the GMC syndrome.

[@ras22273]

@@HenauderTitzauf Brand loyalists of any brand suck the fun out of everything.

[@alexgoldstein7553]

Hahaha

[@coleray5044]

I wish I knew someone like you to help me with projects. You are truly a great entertainer.

[@cody3558]

Dude you crack me up and your videos are fun to watch definitely glad I found this channel.

[@salmonowiczdavid]

Man, found your channel last week, and then watched all of your videos quickly thereafter! Favorite channel!

[@maryannnaczi2485]

Ah my Sunday afternoon delight. A new video!! Looks like your Cummins swap was a success and know you eventually will get the A/C up and running. Westen, you and Garrett are doing such an awesome job with your channel. 147K subscribes and growing. Love your positive attitude and thank you Garrett for interacting now. Love how you bring it all together. Love ya lots. Keep em coming!!

[@YENKOGT]

It was cheap! . God bless you man , you got charisma my friend... I hope your channel grows bigger and bigger

[@tonybrown6940]

One badass truck sounds killer for a Ford Cummins is definitely a great motor

[@johnminor2496]

Great job Westin. Great truck too.

[@willislawns]

My 6.0 is running great! 225k with stage 1 turbo, one over stock injectors, tuned, and factory head gaskets! It's daily towed also

[@3sons66]

Enjoyed very much watching this build from start to finish. Now I don't have to listen to my wife ask "are you watching that Westen character again?!".

[@mikestrucks]

Power driven diesel is definitely the right address 😬💪🏻

[@GingerDlite]

Great conversion and not a bad price for this.

[@abrahanflores9469]

You should do a video were you take it to the ford dealer to change the oil and record their reactions

[@dunstan06]

Okay this was great, I have a 2005 F250 was thinking about the bulletproof option now going with Cummins THANK YOU

[@Takeithome345]

Nice job !!!we here in Wisconsin do the same swap !!tons of junk power jokes up here to !!!!

[@strano1029]

Where do you find them?

[@MrLuke3427]

Great build Westen way to go ...

[@thelifeofjessejames]

I drive a 2008 Ram 3500 Laramie but I like the looks of that Ford better. Then again, I sure do love my Cummins

[@grizzlybear1549]

I remember I was looking at which would be a nice diesel truck option to buy and surfing through different channels I and up watching this man doing a rebuilt with a wrecked ram 2500 and now I have seen all his videos

[@jtoddjb]

at least you're good at dragging 1 or 2 minutes out to 10. I do wish I lived in Kansas though

[@iviaverick52]

the 6.4 powerstroke makes the 6.0 look like solid gold.

[@carguy7536]

Another enjoyable, informative posting Weston. your subscriber numbers will be passing those goonzquad brothers in no time!

[@stevespawn1]

A straight forward answer on costs-thank you- it would be nice if you said theses prices along the way. I still would have watched all these videos-good stuff Westin!

[@dakotashireman6404]

id just like to say sir thank you for your content and will to get at it :P Being here before 50k subs its cool to see the growth of your channel we all know you deserve! Hell Yeah Brother!

[@back40projectprogress65]

The smiley face was by far what made my day thanks for awesome content

[@BrokeDown724]

Can you elaborate on how the transmission is controlled? Stand alone? Or just the factory PCM? This is a great video series in how you did this conversion and was fun to watch. I just wish I could find an engine that was anywhere near what you paid. Just have to keep searching.

[@dpd16790]

they were offered in xl, xlt, lariat, king ranch and the really rare cabelas trims.. no platinum until 2013. i beleive the regency package is after market too..

[@BlazedOrange29]

Favorite Westen quotes from the video “I could go off an on out in the bushes” “ I ain’t the smartest cookie in the jar” Red faced an barely containing laughter “I got somethin in my mouth”😂

[@lukesaid7891]

Yo Weston, I love your optimism in each video

[@wyattessary5663]

What's happening to the '95 Ford? Let's see what its doing?

[@R6Ron]

I like that blue ford tractor in the background

[@jefferydrew9571]

I like way you do no bs show how to do it and good so I say good job that come 47 yrs retired machainc that you meet good work later on

[@williamj.barnhartjr.3108]

Awesome video Weston you couldn't buy a pickup like that for less than 25k anywhere. I'm not a Ford man anymore but I'd take that truck now, thanks for sharing God Bless you and your family.

[@jamesr4285]

Damn dude that’s cheaper than I thought it would be. I’m stationed at riley and go to Wichita on occasion. I hope to see it!

[@ethanwall3083]

I live in Andover😀

[@brc050100]

I'm excited to see this puppy get tuned up

[@JamesCooperCrackers2Caviar]

Westen...you're a man of high caliper 😎 This is another content loaded great video! Just wondering...how many hours do you think you have into this project? I'd be interested to factor in your labor as a part of the cost. Keep the fun filled, high quality content coming!!!

[@jasons9249]

You made it look so easy watching the video.

[@EMattHowerton]

Finally, Wes! Been waitin' on this video since man was waitin' on a woman.

[@sixtoes2313]

Every New Ford f series I bought needed the front end shimmed. 1989 F-350 Dump, 1995 F-150 PU, 2003 F-250 PU. Now I am on a 2017 F-250 PU. No shake yet. keeping an eye on the front tires for wear.

[@nam6866]

Good Video.Now wait til someone wants to borrow it,or they need you to move furniture cause thier moving.

[@jschob9284]

Fred had a perfect entrance! Great video!

[@trimcoversit3971]

That’s Kansas state government school math right there.

[@Logan-cp5fq]

I still love that a Ford is Makin Cummins noises. Been at this channel back when we realized that 6.2 Chevrolet was knockin.

[@markbrisbin8597]

1 week is too long to wait for new content!

[@stewitruck]

Haha I agree 💯 but at least we're getting some.

[@dextermorgan9703]

Man if only you were around before the internet waitin a week for the next episode of your favorite show

[@markbrisbin8597]

@@dextermorgan9703 i was. 🤣🤣🤣

[@WestenChamplin]

Im going to try to get more videos out.

[@markbrisbin8597]

@@WestenChamplin your awesome guy at making videos and just cant get enough of the southern slang lol.

[@MRHSDM316SD18186]

Westen, I like how you break down the cost(s) for your projects........

[@mikestrucks]

Hell yeah a new video !!! 😬👍🏻

[@cumminschevy5275]

Hey buddy

[@mikestrucks]

Cummins Chevy hey chevy 👋🏻

[@cumminschevy5275]

@@mikestrucks 👍

[@michaelcanter1405]

Cummins in a Chevy is nice

[@cumminschevy5275]

Can't go wrong

[@MlgRekerrgamming]

Such a smart idea I saw your videos their very top tier for truck projects

[@poobular]

Put Cummins badges one that truck man, hide the fact that it was ever a power stroke

[@jettables9470]

he'll only be reminded every time he opens the hood since he used the shroud from the power stroke :(

[@Lichor2369]

@@jettables9470 Dremel tool can fix that as well though.

[@jettables9470]

Drevain lol good idea

[@yomommasgardener9648]

Drevain that’s some fuckery right there

[@Mr.Beastforpresident]

Texas Aggies The fuckery is in the Powerstroke

[@rickeymarchman7548]

Love your videos ya'll are good old boys how is the mustang build going you have a good sense of humor I'm from Alabama can't wait for the next video

[@wade998]

2:38 6.0 is far better than the 6.4. They need headstuds, gasket, egr delete, oil cooler and few other things. 6.4s are pretty much non-rebuildable; they're throwaway engines.

[@larrysheftel8380]

There both junk

[@wickedb16]

Wade you are correct 6.0 studded and deleted is the most reliable light duty v8 diesel besides the 7.3

[@rondyechannel1399]

Not true! The 6.4 fixed all the mechanical problems of the 6.0. The new emission requirements wreck the 6.4. Over fueling the rear two cylinders to heat the DPF only washed down the cylinders and filled the oil pan with fuel destroying the engine. My deleted 6.4 is at 299,000 and about to roll over. No issues other than leaky radiator hose coolant fix. That said I have a 5.9 bus ready if I ever need it. Love the power of the tuned 6.4!!!!!

[@larrysheftel8380]

So why do I say 6.0 6.4 junk. My 96 Dodge manual 4x4. How old is it? I only two ball joints replaced two belts. Still on stock water pump clutch and everything else This truck I give it hell and back and 4 wheel the hell off road it All friends that did buy the Ford's said never again . Why should you need to fix the motor of a diesel . At 100.000 miles ?

[@rondyechannel1399]

@@larrysheftel8380 The issue is the DPF!!!!!! A stupid poorly designed contraption that sent extra fuel into the rear cylinders for heat to regen. It didn't work and only filled the crankcase with fuel which makes a shitty lubricant. Wore out everything, so yes, junk by then. Throw it away. If you get rid of the EGR and DPF BEFORE it eats the motor they will last. I'm not comparing to the 5.9 which I still have in a 1989 1 ton 4X4 from new. My deleted 6.4 has right at 300,000 and NO problems. After all the bad press I also have an early 24V 5.9 sitting in a low mileage bus if I need it. The 6.4 is quiet and powerful and so far very reliable, but it has been deleted since new. Others have the same experience. Others let the fuel oil in the crankcase wear out everything from the rockers down. It was famous for 'making oil' on the dipstick.

[@davidcaskey4669]

You picked a great motor for the swap I have a 95 dodge with that same motor. Added schide injectors, 0 fuel plate and cranked the star wheel all the way around was 170 hp may b 300 hp now but the torque is great better at low end than the 24 valve I had

[@happycommentator6773]

Cool swap Weston . Now, where is 97 Aeronose crewcab Longbed ? Us OBS guys need to know .😂

[@grumpyghost4440]

Awsome stuff ! Glad someone put a vid of the cumins swap in a ford ! Keep them coming ! We will be watching

[@johnparrish9215]

I like the Fummins a lot more than the Mustang. It's the best of both worlds. I'd drive it till the wheels fell off.

[@asanchez276]

This is a Frankenstein !!!!! There goes the value of your truck!!

[@councilquirks6601]

YOU GET EXTRA CREDIT FOR BEING LEFT HANDED.....AND THANKS FOR THE COST INFORMATION.....

[@stevekleinhenz8262]

Market value is 18k to 25k depending where you are at! Great Job! I would definitely want 10k labor to do the swap!

[@nickhricziscse283]

My question is about the gauge cluster and transmission. What did you use to make the gauges work and how did you get the trans to shift, did you use a stand alone system?

[@stephenstrohacker7863]

I'm ging to redo my 99 F-550 crew cab western hauler this fall into winter. 98 12v upgraded to 500-550hp, from auto to 13 speed double overdrive manual and air ride from Kelderman. I'll never need another truck.

[@RedWingsninetyone]

I think your next challenge should be to eliminate the check engine codes lol

[@johnfleury5430]

Very nice work now you have a reliable ford agree with you thoses trucks are very nice inside under the hood is not so nice take care be safe

[@adamshillingburg2925]

Does the check engine light stay on? I would love to do a swap like this but we have emission testing and if your check engine light is on they won’t test your vehicle. Great job keep it up.

[@WestenChamplin]

yes it does

[@noblekitty]

My Fummins doesn't. Check my videos

[@dw6505]

When they tune it they can turn the check engine light off. Then just get truck plates for it so you dont need echeck. At least that's what I did in ohio. I did the same swap to an 03' f350.

[@jbaker8871]

Im lil jealous. Really beautiful truck bud. Great job. I was planning doing swap on my exact truck as yours and it was stolen. Thinking bout a cummins in the work truck now.

[@shakenbake3107]

You should do a cat swap on a pick up truck!

[@w829l5]

West, you're the man, great to see that beast rolling

[@TakodaEhlin]

Hey now, I like my 6 liter. Use it everyday and tow whenever I want

[@nickconrad94]

Me too! 202k and the ficm is finally going out

[@coltonjacobs5383]

What did you end up doing to it? I heard that you can just upgrade the egr cooler for $400 or so and it will pretty much be fine as long as you don’t push it real hard.

[@nickconrad94]

Ya Boi CJ mine is stage 3 bullet proofed, new heads, egg delete, head studs, turbo cleaned & refurbished, upgraded oil cooler, all that good stuff. Running a mild tow tune right now and everything is great. The 6.0 kinda sucks of the factory floor but they can be made into great trucks for the fraction of the price of a new 6.7

[@someone4029]

@@coltonjacobs5383 delete everything. I had mine done by a gentleman in South Carolina that specializes in the "bulletproofing." The term is used loosely and means different things to different people. Bulletproof was trademarked as a brand. Worryproofing these bastards the right way includes higher voltage ficm sp if it does start to fail at lower voltage you aren't destroying injectors before it can be replaced, balance and clean turbine side vanes, deck the heads flat to remove any existing warp, ARP head studs instead of bolts, blue spring upgrade, service HPOP, stock or black head gaskets if necessary, stand pipes, dummy plugs, hardened valve guides/sleeves/seals, coolant flush (the whole expensive process with VC-9, etc.), second oil filter, a coolant filter and bypass, a tuner or gauges for monitoring, (just go with tuner to get rid of CEL from EGR delete). Some recommend a pytometer, but exhaust gas temp shouldnt be an issue on a 6.0. Everything listed and added ti the price of a used 6.0 is still cheaper than 6.7 by far, and far more reliable than a deleted 6.4. The 6.4 is fast as shit, but more expensive to repair that engine.

[@duttydiesel8303]

That is a pretty sweet build!!! The only thing that I wish you had changed, and this is from my own selfish needs... I wish you would use a 24 valve, because that's what I want to swap into a Ford! Lol

[@gilbertquick2412]

Me too

[@duttydiesel8303]

@@gilbertquick2412 - well if you subscribe to my channel, I will be doing something cool with the 24 valve eventually! (Sometime in the next 50 years) LOL I'm split, half of me wants to do the 2008+ Ford... Half wants to do a 57-85 Ford Cabover... Lol we shall see what the future hold in store!

[@billybullfrog]

Can you do another build with the same year truck but put a 7.3 in it out of your ‘95

[@lionheart9375]

billybullfrog leave that 95 alone but another 7.3 in the model truck would be cool !!!

[@jessepitt]

Why would you take the heart out of the 95? It’s a better truck than the newer one.

[@jkoonce4244]

3000 mc'doubles 2 small Aussie tribsman and a decent sized African elephant 0:03

[@trent101church]

Love your videos brother your funny as hell . Maybe one day Beyonce will call

[@mattisaac2217]

That's how you make a Ford go fast lol love ur videos keep up the good work