The video you shared worth of million times for a beginner. Thanks Brother. Looking forward to see some more stuff from you. Hope I might having a similar room with all that fire related stuff. Have a blessed day ahead.
@devonholford33313 ай бұрын
I love your videos
@bradleycooper61073 жыл бұрын
Really good stuff man! I'm definitely saving links to your videos and sharing to any new of the new techs we have/ will have. Great work! 🤘
@nics-systems-electric3 жыл бұрын
Thanks
@lumenfirealarms3 жыл бұрын
Hey cool video! Right now I'm working at my training room!! I got some new devices that I wanna check out!! Stay safe and have fun!! ...
@Samthe173 жыл бұрын
Lol we got trolled at the end.
@vafirecollector95473 жыл бұрын
Awesome video! Good work as always. I wish the Notifier 320/640 panels allowed for adding individual devices instead of having to do autoprogram all the time.
@nics-systems-electric3 жыл бұрын
I didn’t know that do you have to erase and then re-configure the whole system I guess
@vafirecollector95473 жыл бұрын
@@nics-systems-electric Thankfully once a device is programmed into the system you can modify and delete points individually. You just cannot program points individually like you can on the 9200UDLS
@nics-systems-electric3 жыл бұрын
@@vafirecollector9547 that would be nice if you could add points
@Roxxofoxxo2 жыл бұрын
@@vafirecollector9547 Yea I wish you could individually add points, autopgoram takes a while but at least your settings and stuff don't get deleted
@gamingwithwilliamyt13413 жыл бұрын
Dam you got me good there with the testing bit lol
@jakeelliott92853 жыл бұрын
Saw that coming at the end because it wasn’t part of the video. I didn’t think we would see a test in this one.
@jakeelliott92853 жыл бұрын
Well I’ve seen your tricks.
@FireAlarm333 жыл бұрын
Can you please show how to do this with a Pull Station? Nice video!
@nics-systems-electric3 жыл бұрын
Not anytime soon being I don’t have any more pull stations to add I could show a module though but they are all the exact same way you just select module instead of detector
@nesmanmain00013 жыл бұрын
Hey Pickle, I recently acquired a Mircom 525U detector and am wondering if it has a magnet test in it. Also got a Dual Action version of one of those generic Canadian pulls. If you have discord, I can communicate there too.
@nics-systems-electric3 жыл бұрын
To be honest I don’t know much about those detectors you could always just put a bag it on all sides of it and see if it has magnetic test
@nesmanmain00013 жыл бұрын
@@nics-systems-electric how would that tell me if there is a magnetic test or not? Also are the dual action canadian pulls rare?
@nics-systems-electric3 жыл бұрын
@@nesmanmain0001 LOL I meant to say put a magnet on all sides of it
@nics-systems-electric3 жыл бұрын
Not 100% sure what pull stations you are talking about probably more rare
@nesmanmain00013 жыл бұрын
@@nics-systems-electric do you have discord? I'm on the fire alarm techs and collectors server
@IanGSully2 жыл бұрын
Are the bases for the detectors made by System Sensor? Because I thought I saw a System Sensor sticker on the base.
@elsiebonilla74453 жыл бұрын
Cool thanks!
@firealarm300andmore43 жыл бұрын
Cool
@SouthwestFireAlarms3 жыл бұрын
yes!
@rodgodx345 Жыл бұрын
Heat detector next?
@agreniers2 жыл бұрын
Noice!
@Fire-hq3rm3 жыл бұрын
I will say I really like the 365 series smoke and heats
@nics-systems-electric3 жыл бұрын
Me too
@Fire-hq3rm3 жыл бұрын
@@nics-systems-electric i Can you guess the model before the 920ludls
@nics-systems-electric3 жыл бұрын
@@Fire-hq3rm I’m assuming you mean the 9200 UDLS before it was the 9200UD
@Fire-hq3rm3 жыл бұрын
@@nics-systems-electric correct
@Fire-hq3rm3 жыл бұрын
@@nics-systems-electric the the only differences between them is the 9200ud has the look on the side of the cabinet, and it’s only compatible with the lcd 80f annunciator, and is in a smaller, more rectangular cabinet
@fyrelite073 жыл бұрын
6:38 I got P-P-P-P-Pranked. (Dam you got me good xD)
@nics-systems-electric3 жыл бұрын
Good lol sorry
@VOLTRONDEFENDER44403 жыл бұрын
Pickle you need to wire a resistor to the activation device so you won’t get any troubles on the panel
@nics-systems-electric3 жыл бұрын
No I don’t it’s an addressable system
@VOLTRONDEFENDER44403 жыл бұрын
@@nics-systems-electric when you had your old system u didn’t install resistors
@nics-systems-electric3 жыл бұрын
@@VOLTRONDEFENDER4440 yes I did every single zone and nac that’s why there were no troubles
@VOLTRONDEFENDER44403 жыл бұрын
@@nics-systems-electric well on your Edwards I never seen any resistors in the wires at all
@VOLTRONDEFENDER44403 жыл бұрын
@@nics-systems-electric and if you see my mini system I don’t need resistors since I don’t use a fire alarm control panel
@FireAlarm333 жыл бұрын
Just Wondering ... have you ever been to Canadas Wonderland and is it any good?
@nics-systems-electric3 жыл бұрын
Nope this is the first time I’ve ever even heard of it
@FireAlarm333 жыл бұрын
@@nics-systems-electric Thanks!
@koltynholyan83593 жыл бұрын
Hey pickle I was asking if you coul make avideo on how to connect the 12 volt battery to the police lights because I got all the supplies to make it I don't know how to thought I liked subscribed and turned post notifications on
@nics-systems-electric3 жыл бұрын
Not anytime soon maybe sometime
@koltynholyan83593 жыл бұрын
Oh okay but what kind of battery do you use
@koltynholyan83593 жыл бұрын
And how many to power it
@nics-systems-electric3 жыл бұрын
@@koltynholyan8359 Whatever you want I used sealed lead acid batteries
@hunterfirealarmsandsuch50643 жыл бұрын
I new you weren’t going to show it at the end. When I saw the magnet i thought, naw he’s lying
@FireAlert3 жыл бұрын
finally
@Reidsbusesanditems Жыл бұрын
Is your system lite speed or clip?
@nics-systems-electric Жыл бұрын
Litespeed
@firekid19403 жыл бұрын
When will u make a system test?
@nics-systems-electric3 жыл бұрын
Hopefully next video witch will be on Wednesday.
@firekid19403 жыл бұрын
@@nics-systems-electric well Thursday here cuz i live in the Philippines