How To Add a Key Fob Without Going To Mercedes Dealer

[@Chicagotommy]

Thank you for sharing. Just left the Benz dealership. They quoted $1,130 for fob, cut insertable key and programming. I couldn’t believe it. They also were persistent in saying it has to be the dealer doing this and that a 3rd party key will not work. I was reminded today how car dealers are very unethical.

[@ebonymilligan240]

Literally going through this right now

[@NR-vw2rd]

Now wanted $1,800 in WA

[@Tony-yb4mo]

Yikes what model??? I just lost my key.

[@NR-vw2rd]

@@Tony-yb4mo GL350 Bluetec SUV 2012

[@DylanT18]

@@NR-vw2rdhire a locksmith. Probably looking at 300-500 dollars but better than 1800 at the dealer

[@johnhall4427]

Great vid info. Thanx for your kindness. I only had one key also and i got stranded one day and my car wouldnt start for nothing. Very stressful. I said never again. Inside the fob circuit board theres a tiny little coil with wires thinner than human hair. I hear sometimes the wire can break. Maybe after many years of repeated dropping. But who knows. I looked close and couldnt find anything wrong on circuit board. But anyway i found a guy who drives to your house and programs a new key that he has on the spot. Then he cuts out the new emergency key. So much cheaper than dealer. I was gona buy the ebay key but outa respect for the guy i paid him for the key. Then he programmed it. Also, keep in mind, some ebay sellers sell bare key fob shell for cheap. No circuit board. The whole circuit board from your old key slides out in one pop and you can slide board into the new fob shell. Now your beat up key looks new. I did that one my older key. By the way the fob battery is only to unlock the car. If your take the fob battery out key will still work for starting the car. I now always bring the second key with me everywhere i go and just keep it locked hidden in the car while im out so as to never get stranded again.

[@Mister_Merzen]

Oh thank god, good to hear about it starting without battery… really was my main concern… but my question is where did you go to locate a guy to reprogram it? I have a 2004 c240 benz… I’m located in WA… lmk brotha! 🙏🏻 would save me hundreds of dollars and lots of hours searching…

[@fuffoon]

I disassemble my 2012 fob with youtube instructions, cleaned it thoroughly, didn't panic about the minor pins that cracked as was previewed in the video, and put it back together. It works perfectly now. The problem was range and sticky buttons. To soften the glue I used a hair dryer. Once open and all electronics and metal parts separated, I used dishwashing liquid and a toothbrush to clean the majority of the gunk. Important is to press the buttons gently from the inside of their fob half and clean around the edges that are normally recessed when the buttons are flush. Lots of sticky gunk to diminish their functionality. The electronic board was fine. I did need to buy a second key after losing one in a house fire. 430 euro. That is why I opened my daily key to see if it was just gunk. It was just gunk. Important tip. Don't let the key that was opened get immersed. It has certainly lost some water resistance. If you wish and are dexterous and good with gluing, you could reglue it with a very fine syringe tip, but it's probably more of a risk than help. Plus, it will be easier to clean should it need it again.

[@meadedillon1715]

I called two lock smiths locally to get an aftermarket smart key programmed, one wanted $450!!! The next one charged $125, he can also get the original Mercedes smart keys at a steep discount compared to my local dealer. It seems the dealers are pricing this work very high to drive us away.

[@Tony-yb4mo]

What make and year model is yours? I heard they can't do anything below 2014 now

[@jonjones6749]

@@Tony-yb4mo Yes they can but they dont sell keyless go keys anymore they have regular key without keyless go. $480 @ MB dealer

[@scotcressman4032]

Do you know if this person still can reprogram MB keys this inexpensive like yours? Looking for a spare

[@malcoma.8840]

Thank you for sharing. Always I learn a lot from your videos. Today I learned another thing that you are a great person with good soul. Thanks again

[@alan7260]

Same price from Mercedes here in London UK. (£620) But lots of ways to add lost key to insurance or free with AA Gold

[@jacektyski5370]

Thank you for sharing this information with others.

[@louishache3672]

Thank you so much to share your very interesting story...

[@lizagomez7368]

So great of u to explain this. I refuse to pay dealer prices. Thank u.

[@cb400fhonda6]

Thanks You are correct Saving most owners Gr8 info

[@BlackhawkPilot]

This works up to 2014. The new system requires different programming. All the local locksmiths can do the early MBs but not the later MBs.

[@ghazarian100]

you suppose to show how to add a key and but all this talks were about buying on eBay ,good video for slow people

[@gearjonny369]

Thank you for your explanation sir. I have just bought this car for my daughter. I also have an Autel scan tool.

[@rumrunner8260]

Every locksmith I've talked too said they can't do any MB newer than 2015 and I have yet to see anyone program one newer on KZbin

[@scotcressman4032]

Hi. Thanks for what you’ve researched…. As well I’ve been looking and calling, asking reading etc… lol 😂 for couple years, and I’ve seemed to be hearing that it’s 2014 like production late that year but still 2014, and newer can’t be exc for dealer? Something like a system like fbs3 or fbs 4… I’m sure the name is off, but it’s the newer “system” name from these years up… 2014 or 2015…… In the GL models are the ones I’ve been mostly asking on… Is it on all or certain models?? Thanks for your time!

[@arnietwo11]

Good result peter !! Keep the original as the spare !!

[@Thepr_otagonist]

Does the new key work with the push to start?

[@jorgeamarroquin8933]

Hi how are you i am one of your suscribers and have a problem with my only keyfob, in the video said that you have a friend or a shop that can program the keyfob,I would like to know if is possible that i can have his information. Thank you and keep up making videos,I learn a lot.

[@YoungBizz408]

Good gawd get to the damn point

[@UniqueEnterprisesINC]

HAHAHA

[@gregorybeasley2150]

😂

[@pfoxhound]

Does it have a keyless go feature?

[@kimberlylewis7584]

I ordered one on ebay put my old board in it and it works great 👍🏽

[@frankiefrigenti491]

Does this aftermarket key fob work for push to start or only turn to start?

[@paulalbini4267]

Ya that's my question too. Did u ever find out?

[@nancylnichols]

My Mercedes is a 2000 E320 wagon gas not diesel will this most likely work for my fob?

[@abaassabaassi2716]

Thanks for sharing. For me at the present time, it is only a very useful information just in case.

[@Elevatevisiondigital]

I had mine done buy a guy for $350CAD all was good for 3 months but then it stopped starting the vehicle still unlocks the doors but won't start changed batteries as well

[@robertdonez3420]

Thank you for sharing I have a 2008 ML same problem you helped me greatly

[@DesiDaVinci]

Mr how to program the new key ???

[@DaytonaDan-bi2wb]

That key fob cost me $ 325 at the dealer and I had to wait a week for it to come in

[@RealCptHammonds]

Thank you for the education. Heck, it would be cheaper for me to file an insurance claim than going to the Mercedes Stealership to get a new FOB and enclosed emergency key cut.

[@yogib37]

I bought many parts and keys from the MB dealer in Santa Rosa. They are really good people. Chris was very helpful to me always.

[@lcervantes8505]

Thanks for clarifying. I have three keys from previous cars sitting around. I guess we'll use them as ornaments on the Christmas tree.

[@LAactor]

Or keep it for when the shell gets damaged. The back can crack or break off or the buttons can rip through

[@nyacoustics8373]

Do they program in online or how much to do locally about

[@Repair_Been]

Online would be more expensive including risky, because: Local reading the key, storing it on media (that equipment costs additionally) , sending the data online.. sending the new key ( with risks to be stolen in transport). Even if you send original key to be created copy, additional 2 risks for both. =Only local.

[@nanavlogs1447]

Great video very informative

[@leeb3644]

Hi there I think it maybe possible to reprogram the key for you. Would you be able to send me an image of both sides of the internal circuit board ?

[@LAactor]

What are you thinking? Reverse engineer it to find what stores the programming and install a new one? He returned it. I would have. Especially if it was cracked and no longer programmable

[@leeb3644]

@@LAactor i didn’t know he had returned it. I’ve successfully removed and replaced data on a fobik key now so I know it’s possible.

[@SangheliosGaming]

@@leeb3644 So you basically buy a new chip that stores codes and program it and solder it on key PCB or what?

[@SangheliosGaming]

@@leeb3644 How you extract codes from old chip?

[@scotcressman4032]

Do you still work on programming of these MB smart keys? Reprogramming?? Interested if so

[@atikovi1]

There are some places that can wipe an oem Mercedes key and make it like a virgin, just have to search around.

[@jamesoconnor3017]

Good man, thank you! 😎👍

[@john8451]

I was always told that new keys were delivered from Stuttgart as they had to be paired to the original VIN for the car and that coding information is never allowed outside the factory where the car was built. Seems like that is not true! 😡

[@AACACentralFallMeet]

Excellent!

[@Staniola]

On the Chinese key this is only a cap, the place where should be the emblem. Just remove it. With the key in the package should be an emblem that should be able to get on that place. Thanks for the content as always!

[@tubeyou0925]

I've never seen this... what brand key or website comes with the logo? all mine are caps only...

[@100pyatt]

"Keyless GO" push button start.... Compatibility ?

[@ghazarian100]

no

[@skullyyy__]

dose this work on a 99' clk320?

[@AnnCorey-k2p]

I am looking for a more cost effective solution to obtaining a key fob for my S550

[@Smr402]

He does not show you how to program it only where to buy a key that may or may not work...

[@bestaakfraidoonnooristani4661]

Thank you so much for sharing.

[@MarioJurjevic]

Please,visit your cardiologist,you have cardial issues. Thanks for video

[@bmichelin1574]

How can u tell ?

[@Mister_Merzen]

🤣

[@hfarms5779]

Thank you. We lost fobs on two cars.

[@allanriches9381]

fantastic information

[@e.palpatine2464]

Thanks for sharing! 👍👍

[@oralreid7714]

Thank you for your help

[@alanyared9798]

First of all the dealer does not make the key . They have a mobile locksmith who charges $ 130 and the other $ 1000 is strickly PROFIT !

[@Jemstk]

150 and came to house philly PA area USA

[@scotcressman4032]

Hey.. so I’m from pgh,:) and now in Dallas… But does this same Person do keys from somewhere that could send in the mail after reprogramming or programming? That’s a great price if possible on an2014, GL

[@luk234567]

Ok, so I watched 12 minutes just for a story nap and not showing how to replace a battery

[@williamkelly7743]

Thx

[@josephkebbi1146]

Thank you.

[@Locksmithmax81]

I am a locksmith for a living come to me i charge 450 with key fob emergency blade cut and programming

[@abdulnasser2335]

So how do program it what a waste of time

[@justinjoyit13]

Please, when you are doing videos like this- you don't need to keep shoving the key up in the lens- or dragging the story out and repeating yourself, just get on with it!

[@enzodriver]

this video was a waste of time

[@mikedenman911]

Bla Bla Bla. Get to the point. This video could have been 1/4 the length.

[@MarkWhitener100k]

You never showed how to add (program) the FOB....!!!

[@ChrisFaulkner]

This is one of the worst videos ever on KZbin. I spent 12 minutes of time I will never get back.

[@jonjones6749]

All these videos are so much longer than they need to be. That and a very strong accent and I never watched much of your video I am sorry sir.

[@YushaR2905]

Racist fk

[@markpasieka]

Holy cow does this guy like to hear himself talk... his excessive intonations in English literally scare me... almost 12 minutes of bull-crap for what should have been a thirty second short video

[@mieludo]

Not worth watching just talking bs.