How to adjust your Callaway Epic driver

[@greythanaetherion5519]

Only place I found a sensible, easy explanation. Calloway's own videos do a horrible job of explaining the two-tiered, jigsaw configurations. Thank you!

[@timthecoolmanful]

Thank you so much, I was struggling how to figure this out, easy instructions to follow.

[@Softouch333]

Good explanation. I was confused thinking one collar was for loft and one was for draw/neutral bias. But the +1 loft setting for instance is on one collar and +2 is on the other. There is also a draw setting on each collar. Just start with loft number you wish and then add either a D for draw or N for neutral lie setting. Also as stated below S is for stated loft not slice! The collars are captured so you can't lose them or have the wrong collars. I can't image the engineer who came up with the combos and the jigsaw like design.

[@getsomemtb7427]

Thank you for the vid. Just got the Epic Max and this explains everything. Cheers!

[@mickg8561]

Great explanation! I didn't have the lines sandwiched! Couldn't figure out why I was mishitting... Sandwiched them after this video -- BOMBS

[@jamesharris6578]

Thanks for a great video and making it easy to understand.

[@jaymorin7131]

Golfworks offers additional slider weight values (6.4, 8.5, 15.5 and 17.5) so there is additional customization available. I believe the stock slider is 12g and not 17g. The Epic Flash also has a front weight that can be used to help alter the swing weight. The hosel adjusts do have some limitations as not every combination can be achieved.

[@dougburgess3813]

Thank you! Great explanation.

[@DillonLoomis22]

Excellent explanation better than callaway vid lol

[@matteosponchiado9690]

Excellent explanation better than callaway! Thanks from Italy

[@sunnyparmar2914]

Great video thank you. 👌🏼

[@thejameslealartco.7625]

Good explanation I just wish you had close ups of the adjustment marks you were referring to. And why were you looking around like you stole that driver and was just about to get busted?

[@grmacdonald777]

Lmao!!!;😂😂😂😂😂😂 Exactly what I was watching and thinking👍

[@myst8217]

I have the Speed model and same Callaway tool but I get no clicks and it feels tight. I'm nervous to tighten it further

[@eddiebellamy7605]

When adjusting the sliding weight, is it supposed to click when tight just like when you adjust the hosel?

[@jimmystrudel]

Ok so I'm left handed and my ball tends to fade and I want to fight against that. What should the settings on my club be? This is very confusing.

[@midlifebiker7424]

S is for Stated ie 10.5. I wouldnt buy a driver without hozel adjustment as it has a much bigger impact than the weights. D - draw setting will close the face, the back weight is only a fine tune.

[@koby90287]

Does this go down to 9* or only 9.5

[@MrSmashmouth07]

what is it something after him he looks to his left who there

[@margievance659]

I do not hear a “click.” Does this mean it is t secure?

[@Golfbidder]

Margie, if you're happy the screw is working properly then the head is not going to fly off down the fairway, however it might become loose after a few shots if it is not tightened properly. Best check with your local PGA Pro when you can.

[@getsomemtb7427]

Only use the tool it came with as it is a torque wrench. If unsure, loosen it and retighten with the tool until it clicks. If you don't hear it, you're probably not turning it hard enough.

[@donfisher6659]

Easy to understand. Only wise the guy could talk like he was talking to an adult, and not a 6 month old baby.

[@eugenedizon48]

So distracting when you look to your left. What’s up with that?

[@jimmystrudel]

His captors have a gun pointed at him.

[@tomarnold728]

you need to adjust your volume.....get a better microphone

[@davidsherer52]

Thanks! Great explanation, and it worked!🏌🏽‍♂️