How to apply a ceramic coating to your car!! (and graphene coating)

[@PanTheOrganizer]

🔥 For more quality detailing products visit: tinyurl.com/bdehsjys ⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: McKee’s Coating Prep Shampoo: amzn.to/3g0Mut8 Adam’s Strip Wash: amzn.to/3pNWuuf Chemical Guys Clean Slate: amzn.to/3vqaiMp Purple Power Vehicle and Boat Wash: amzn.to/3cELPN1 Koch Chemie Gsf: bit.ly/3vlmIVW Koch Chemie Gs: bit.ly/3pRNFPP Optimum Power Clean: bit.ly/3vuWFMl CarPro MultiX: bit.ly/35f7VRZ IK Foam Pro 2 pump sprayer: bit.ly/3iDCb0V Gyeon Iron: bit.ly/3xgKow8 CarPro IronX: bit.ly/3wq42Wr Gyeon Clay: amzn.to/3wl5iKo Gyeon Clay lube: amzn.to/3cCsZpI 3D One Polish: amzn.to/3giXJ1e Koch Chemie Heavy Cut: bit.ly/3vgbZfD CarPro Reflect: bit.ly/3gqXDUa Sonax Perfect Finish: amzn.to/3guBcO3 Koch Chemie Fine Cut: bit.ly/3iDaBRq CarPro Eraser: amzn.to/3iHQq4O Gyeon Prep: bit.ly/3xgKB2o McKee’s 37 Coating Prep Spray: amzn.to/3uCVJop CarPro CQuartz UK 3.0: bit.ly/2RRFk2h CarPro Gliss: bit.ly/3wl5TM8 Gyeon Mohs: bit.ly/3pMI8dy Gyeon Syncro: bit.ly/35f8rPV Gtechniq Crystal Serum Light: bit.ly/35eVSEm Gtechniq Exo V4: bit.ly/3pNXqyL Kamikaze ISM: bit.ly/3gk41Oc Ethos Ceramic Matrix Coating: amzn.to/35gNfsX APEX Metal Oxide Coating: apexsurfaceprotection.store Adam’s Graphene Ceramic Coating: amzn.to/3xejLaY GlassParency Graphene Coating: bit.ly/3zs2EV5 Ethos Graphene Matrix Coating: bit.ly/3pNWnP6 CarPro Skin: amzn.to/2S0pLp5 Gtechniq Halo: bit.ly/2S4CwyY CarPro Reload: bit.ly/3vuXG77 Gyeon Cure: bit.ly/3gA9ZJT DuraSlick Speedcoat: bit.ly/2S7dVJo Ethos Resist: amzn.to/35gNfsX IGL Ecocoat Premier: amzn.to/2TpilvO Gyeon Wet Coat: bit.ly/3vnatbk CarPro Hydro2 Lite: bit.ly/3cEMX3d McKee’s 37 Hyrdo Blue Pro: amzn.to/3gn1ySY CarPro Reset: bit.ly/3cDTQSy Gyeon Restart Wash: bit.ly/2TtVHCE Scangrip inspection light: bit.ly/3vrQJDO Autofiber microfiber towels: bit.ly/2Tvsh6T The Rag Company Pearl microfiber towels: amzn.to/3wqmNcu 🇨🇦 For people in Canada: Adam’s Strip Wash: bit.ly/3cCzNUc Chemical Guys Clean Slate: amzn.to/3gAam7f Koch Chemie Gsf: bit.ly/3K6uED1 Koch Chemie Gs: bit.ly/3FqzrvO Optimum Power Clean: bit.ly/3wn2mwY CarPro MultiX: bit.ly/2U4FtjF IK Foam Pro 2 pump sprayer: amzn.to/3gkZ2wD Gyeon Iron: bit.ly/3giYnvO CarPro IronX: bit.ly/2Swr92T Gyeon Clay: bit.ly/3znhpZm Gyeon Clay lube: bit.ly/3wlFAW5 3D One Polish: bit.ly/2RQfZpk CarPro Reflect: bit.ly/3zoQexu Sonax Perfect Finish: bit.ly/3zmOPaD CarPro Eraser: bit.ly/3iFDWdR Gyeon Prep: bit.ly/3xmU4oH CarPro CQuartz UK 3.0: bit.ly/2Sz1lDl CarPro Gliss: bit.ly/3gzNggX Gyeon Mohs: bit.ly/3gxKatS Gyeon Syncro: bit.ly/3pOfybA Gtechniq kit: bit.ly/3cFqC5E Kamikaze ISM: bit.ly/3gk41Oc Ethos Ceramic Matrix Coating: bit.ly/3pQSzNl APEX Metal Oxide Coating: apexsurfaceprotection.store Adam’s Graphene Ceramic Coating: bit.ly/3wsqT3S GlassParency Graphene Coating: bit.ly/3zs2EV5 Ethos Graphene Matrix Coating: bit.ly/3pNWnP6 CarPro Skin: bit.ly/2S4CFm0 Gtechniq Halo: bit.ly/3zwSjHu CarPro Reload: bit.ly/3zrmbVC Gyeon Cure: bit.ly/3zrt9Ke Ethos Resist: bit.ly/3wp2hZz IGL Ecocoat Premier: bit.ly/3xjLyXL Gyeon Wet Coat: bit.ly/3vl4P9R CarPro Hydro2 Lite: bit.ly/3xkFKNy McKee’s 37 Hyrdo Blue Pro: bit.ly/3gjmwCd CarPro Reset: bit.ly/3wo55Gv Gyeon Restart Wash: bit.ly/3ggTCCR Scangrip inspection light: bit.ly/3iEDvkg Autofiber microfiber towels: bit.ly/2Tvsh6T The Rag Company Pearl microfiber towels: amzn.to/3iF1AHM 🇬🇧 For people in the UK: bit.ly/3cDzbB4

[@napsterjing5982]

Hey, wonder for the clay stage, can I use iron remover as lube to save time.

[@Alexnismo84]

Have you used Sonax CC36?

[@salwanghareb53]

Hi Pam, I live in Calgary, and all my cars are protected with a full stone guard. The only problem is that I'm having some swirl marks on the stone guard. Tried to polish it with a rupes compound and rupes polisher with a rupes pads, didn't remove the swirl marks. Is there a way to remove the swirl marks from the ppf?Thank you for your reply in advance.

[@PanTheOrganizer]

You can as long as you use an appropriate iron remover, and perforated clay towel. We explained this in my video here: kzbin.info/www/bejne/Y2rTh5qghquYZ7c

[@TheUnik1992]

Hi Pan i just repaint all my car should i polish the paint?

[@rudygonzales2003]

So after watching this video AT LEAST 50 times I finally mustered up the courage to ceramic coat my car. Your tips tricks and techniques were so informative. I'll continue to watch your videos and have shared them with just about everybody I know. Pan is the Man 👊🏼

[@PanTheOrganizer]

Thanks for the feedback Rudy! Glad you gathered the courage to do it! I'm sure you are happy of the results. What coating did you apply?

[@rudygonzales2003]

@@PanTheOrganizer CSL and Exo. And it looks absolutely AMAZING

[@jeaneebarnes2835]

Im about to apply my first ever coating today, and I too have watched this video multiple times, finally giving me the courage to apply DIY's 3 year graphene coating. I chose it because I'm a beginner and it was inexpensive. Also, it has graphene in it and the car is not garage kept, so I hope it helps with water spotting. Coating no longer scares me, and I have to give you Pan the credit and the pat on the back to move forward with this final step. If you can make it through all of the prep work, this should be the easiest!! Whew!! Here I go.........

[@cadmando18]

That was about the most information in the best format I have seen on KZbin. So many products, and the time stamps in your video description makes it super easy to go back and find a certain product you talked about. Yes, after this I feel much more confident applying Ceramic coating as well as what other products to use to keep that coating lasting longer and looking better. I have several more cars to Ceramic Coat, and I can't wait to get started!

[@PanTheOrganizer]

Thanks for the positive feedback! I put a lot of time and effort to make my videos so it’s nice to see my efforts don’t go unnoticed.

[@chezchezchezchez]

Did you start?? Thx

[@ottoman7217]

You are not only a car detailer but an entertainer. What would us regular consumers have done without you guys. You are heroes. Thank you for helping us choose the best products on the market and thank you for your fantastic efforts.🙏😎

[@PanTheOrganizer]

Thanks for the kind words and positive feedback. Much appreciated! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 840,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@dianeruiz0721]

You’re awesome Pan! You should’ve been a college professor. I’m serious you’re the best teacher, compared to anyone else I’ve ever tried to learn from. I’m 63 yrs old so that says a lot. What makes you so good is that you carefully break down each and every step, clearly and concisely. You further give relevant examples and offer other alternatives methods. You not only explain the processes but explain why they are so, and the potential benefits, options or consequences of cutting corners. You explain the science behind your teaching. Your classes will benefit the novice as well as seasoned professionals. You anticipate and preemptively answer potential questions. At the end of each section you quickly review so that its super clear. As if all that is not enough you perform the task yourself so that we can visually experience the lesson along with the products used. You offer your students a complete list of products used in all video descriptions. Everything you do, you do exceedingly well. You’ll be way over a million students in no time. You’re friendliness and wonderful personality also makes the lessons very engaging and enjoyable. Thank you from the bottom of my heart ♥️ for all your hard work and dedication! I can tell you love what you do!

[@PanTheOrganizer]

Wow thanks for all the kind words! I truly appreciate such positive feedback. It takes a lot of time, effort and energy to create these videos so I’m happy that my efforts don’t go unnoticed by you, my viewers. I love sharing my passion (and obsession haha) with detailing!

[@NoWaketv]

Fantastic job putting this together, I am a detail junkie on my car and truck and this is stepping my game up and I enjoy the detail work. It is almost therapeutic. Appreciate the lesson bud.

[@PanTheOrganizer]

Thanks Jonny! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@anonymousnoname]

Thank you for this instructional video. I've used iron remover, clayed, buffed out swirls and most scratches, and polished my car to a brilliant shine, due to your helpful videos. Now I'm going to apply ceramic coating, and will be using Avalon King, because of your recommendation. This has been the first time I've gone so far into detailing any car, and I am now addicted!!

[@cleanfreakdetailsolutions4989]

Once again you knocked it out of the park! Great video Pan! I love that you mentioned longevity specific to conditions of where you live and how the vehicle is kept.

[@PanTheOrganizer]

:)

[@HerrmarcellusTV]

You don't know how much this presentation means to us. You're the legend

[@PanTheOrganizer]

Thanks! How did you discover my channel by the way? And what country are you watching from? Cheers from Canada 🇨🇦!

[@joevanseeters2873]

Good tutorial Pan on ceramic/graphene coatings. In regards to stripping washes, one of the best stripping/paint prep/decontamination washes I have ever used is Griot's Foaming Surface Prep. That stuff works absolutely amazing and if you mix it at a higher dilution or use it full strength it works incredibly well at stripping off waxes and sealants to get the surface squeaky clean! Compared to Purple Power Vehicle and Boat Wash and Adams Strip Wash (which I also have) it is on another level. In fact, probably 2 to 3 levels above. You just have to wear nitrile gloves when working with it because it can chemically burn your hands at higher dilution ratios or full strength (I know, I did it to myself. Not crazy burns, but it did strip a surface level of skin off my palms so I am guessing it has a very high PH level). But gosh does that stuff work good as a stripping type of wash. Highly recommend that stuff for any stripping or decontamination wash.

[@PanTheOrganizer]

Thanks for the tip!

[@ryanbrown1500]

Pan, I absolutely love your channel. Your videos are very well thought out and presented. You have uped my "knowledge game" and have made me more comfortable and confident in terms of car care. Thank you so much for the content.

[@PanTheOrganizer]

Thanks for the positive feedback about my channel Ryan! I appreciate it. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 150 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@wikussnygans600]

Applied my first ceramic coating (Avalon King Armor Shield 9)last weekend after watching this video. The car looks immaculate and I am super happy with the results. Thanks, Pan for all the tips and tricks. It made my experience much more enjoyable.

[@PanTheOrganizer]

Thanks for sharing Wikus. How did you discover my channel by the way?

[@wikussnygans600]

@@PanTheOrganizer Hi Pan. I finally bought a car I’ve been eyeing for the past 2 years and the excitement of owning this car pushed me to search for tips on how to protect your paint. I followed the Meguiars UK channel and KZbin suggested you’re channel. I’ve been following and admiring your channel for a year now. Keep up the good work! PS. All the way from South-Africa

[@mr_smilegaming8842]

For reader information, i have used Cquarts UK, Gyeon Syncro, and 22ple HPC over many cars for many years. I would recommend 22ple HPC for the EASIEST to apply especially for beginners. The flash time for this one is very generous. UK one flashes very fast and a bit sticky. Gyeon one is the most finicky which requires many layers as well as extra buffing and exact timing.

[@RTNalpha]

Thank you for the great video Pan! This is exactly the video I was looking for. You responded to my comment last month telling me what I was looking for was coming this month. The video exceeded my expectations, you deserve all of your subscribes. I truly appreciate all of your high quality videos, you can tell how much work you put in, and how excited you get!

[@PanTheOrganizer]

Awesome feedback thank you!

[@lanjoh06]

You’re the GOAT, Pan! I wish you all the best with your line of products!

[@PanTheOrganizer]

Thanks so much, I appreciate the support!

[@brentonl2631]

Thanks Pan for just coating my Porsche, I'll be around to pick it up shortly. 🤣🤣🤣🇦🇺🇦🇺🇦🇺

[@PanTheOrganizer]

Heheh

[@RickMentore]

Were you pleased with the Coating? Can you say how much did it cost to get your Porsche Ceramic Coated. Two years on , has it held up?

[@VIDEOHEREBOB]

I appreciate the knowledge, but more importantly, the truthfulness.

[@PanTheOrganizer]

Thanks for the positive feedback!

[@hemanthpaularigela4773]

Probably The best explanation to ceramic coating so far. Thank u Pan

[@PanTheOrganizer]

Glad it was helpful! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 940,000 subscribers and we have over 124 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@MikesAutoDetailing]

That was a paaaaaaaaaaaantastic tutorial of ceramic/graphene coatings. Pantastic job

[@javonkemp2550]

Lol

[@PanTheOrganizer]

Thanks Mike!

[@theunknownguy265]

Lol

[@TheCarDetailingChannel]

Thank you Pan for making such a comprehensive video about ceramic coatings. Perfect blend of tips n tricks, myth busting, and product choices.

[@PanTheOrganizer]

Thanks !! :) Hope you're doing well bud

[@afdetailing8104]

Well if you need a vehicle to do one of these videos, I’m in Montréal! 😁

[@barryyoung8617]

I recently purchased a new vehicle. Looking to do my own ceramic treatment. I would not think that I would need to do the polishing stage. Love your videos. So much knowledge.

[@PanTheOrganizer]

A light polish might still be needed if the vehicle you took delivery of has a wax or sealant, and 99.9999% of times, dealerships apply some cheap wax prior to delivery to make the car look good and justify the crazy "dealer prep" price they have on your sticker. And as it's crucial to make sure you remove ALL previous protections before applying a coating, machine polishing is the only way to ensure 100% removal of that dealership crap. That's why you see detailers polish a car before applying a coating. It's not just to remove scratches and swirl marks. Also, it's rare in my 27 years of experience, that I see a flawless paintwork when a new vehicle is delivered to a customer. I have a bunch of new car prep videos, where you can see there is always swirls and scratches in the paint. See a few examples below: Audi RS6 Avant Performance: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=mcQiMs9HBLlaqjGK Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Tesla Model Y: kzbin.info/www/bejne/q4eagoqtrtqDgpY Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8

[@barryyoung8617]

@@PanTheOrganizer OK. Thanks for all the info. Now to gather up all the goodies to start the process. 👍👍

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@AlboAl8]

Pan I get this question a lot. Can you still coat cars that have paint damage, deep scratches, rock chips, things of that nature? A lot of people think they need a new car or new paint job to do so.

[@Daviddear30]

Yes you can. Some people aren't going to get the damage fixed. Some don't even do paint correction 1st.

[@PanTheOrganizer]

You still can, as long as you prep the surface correctly. The reason why we polish cars before applying a ceramic coating is because you want the paint to look as good as it can before "sealing" it for many years. But you could still apply a coating on top of scratched paint, as long as there is clear coat there to bond to, it will bond.

[@404notfound.....]

You can't get this kind of solid advice anywhere!! Appreciate this great tutorial pan. 👍🇨🇦

[@PanTheOrganizer]

Hehe you bet!

[@therealkoki1159]

Hi Pan I hope you see my question. Can I use the P&S beadmaker as a topper to an existing ceramic coat? Thanks!

[@Syvirus]

Yes you can as I do it myself. I'm not sure what video it was but pan did say and show that he put beadmaker on his BMW after he washed it. (I belive it was his first "How I wash my car" type video)

[@PanTheOrganizer]

Yes.

[@michaelgeraghty7463]

Hi Pan, thanks for all of your videos and advice!!! I’m getting ready to detail my 2008 Volvo XC70 to your standards now that I know what and how to do it. I’ve owned it for 6-years and have done an interior cleaning each spring and try to do weekly maintenance washes, which are difficult in the winter here in Syracuse, NY. I want to do a ceramic coating on it so this video was perfect to outline my plan of attack on the proper steps to follow. No garage so I’m going to get a Harbor Freight 10 x 20 canopy to work under in the driveway and will perhaps be ready to attach some separate tarps for side walls in case of rain. Aargh, so many products and tools but I’Ve begun buying them as I get everything setup. Cheers and thanks again Pan, Michael G.

[@PanTheOrganizer]

Thanks Michael! To further inspire you, watch my Volvo XC90 detailing video: kzbin.info/www/bejne/qputgZaaeLqUgZo

[@eamonkelly2792]

Hi Pan, what a great video, you did a fantastic job on explaining everything we need to know about applying the coating of choice, once again thanks for taking the time and effort to make the video 👌👌

[@PanTheOrganizer]

Thanks so much!

[@earlspoint]

I have been performing paint correction on my personal cars for over 30 yrs. I have never used a ceramic coating. My order of Adams Graphene just arrived. The car is prepped and ready, so today is the day for my GLS450. I have used a ceramic spray coating on my 560sl, but I will strip it again to also apply the Adams after I see the results on the GLS.

[@PanTheOrganizer]

Enjoy! I will have a 2 year update video coming soon on the performance of the Adam’s Advanced Graphene Ceramic Coating. Is that the one you purchased?

[@Med0699]

Great timing as I'm about to apply my Avalon king ceramic coating on my BRZ!

[@PanTheOrganizer]

I also made an AvalonKing application tutorial here: kzbin.info/www/bejne/iJjPmmmMg7GmgZY

[@Archeagle]

I did my Armor Shield IX from Avalon King 2 weeks ago and i did my first wash this morning. The result is awesome. You will love it. Easy to apply. Like Pan tells in his tutorial, try tonwait 2 weeks before washing your vehicule to get the best results.

[@Med0699]

@@PanTheOrganizer already watched it 👌😂 thank you so much for your videos Pan!

[@Med0699]

@@PanTheOrganizer I can't wait! Thanks for sharing your experience and tips! 😊

[@Alexnismo84]

Great review! Have you used Sonax CC36? I have not seen any reviews for it yet.

[@GaryBe403]

Thanks for the video! Just a couple of questions: 1) Are you using all 8 sides of each leveling and buffing towel? New side per every section you do? 2) Is there any concern with the product drying on the towels and then marring the next section? 3) Can you use the same applicator for the entire car? Same question about it drying and marring...

[@PanTheOrganizer]

1) Yes all 8 sides, flip towel when needed. 2) Not while you're applying the coating. But once you're done with all the vehicle, throw the towel away. 3) Usually yes, but you can do half the car with one side, and the other half with the other side of the applicator. That's if you're using a microfiber applicator. If you're using the microsuedes, change them once or twice during the application.

[@GaryBe403]

@PanTheOrganizer thanks Pan. Really appreciate your reply!

[@ShineYourLightDetailing]

1st!!

[@oliviamalulu9289]

Mr Pan you’re just the best I like the ways you explain everything bitbybit, to make everyone understand

[@PanTheOrganizer]

Thanks Olivia! I appreciate it. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 150 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@MrVrezh1212]

I’m more confused than a homeless man on house arrest

[@PanTheOrganizer]

This is simple once you understand the basics: 1) wash the car 2) use an iron remover to remove brake dust and fallout 3) use a clay bar to remove any other embedded contaminants in the paint 4) if needed, machine polish the surface to remove defects like swirls, scratches, oxidation 5) use a paint prep spray (or isopropyl alcohol mix) to remove polishing oils and residue 6) apply the ceramic coating To help you put those steps into perspective, watch one of the videos below where I fully detail a car from A to Z: Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Tesla Model Y: kzbin.info/www/bejne/naDLnKZurbVohLs Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8

[@jonholland581]

Super in depth compared to other vids I've watched.

[@PanTheOrganizer]

Thanks Jon. I appreciate the feedback. I have been detailing cars for over 24 years now, and I love sharing my passion and knowledge with my viewers. How did you discover my channel by the way?

[@neilwalker5041]

Great video Pan and you dropped a mountain of knowledge.

[@PanTheOrganizer]

Thanks Neil!

[@Tiltzy]

Hi Pan! Two questions 1. What is the light being used at 33:58 ? 2. Do you need to flip your dry/clean microfibre after each section? Or can you use the same side for a few sections? Your videos have given me significant confidence to tackle some of these projects on my own! Thank you!

[@PanTheOrganizer]

Hi! This is the inspection light: bit.ly/3IOYug8 And I flip the microfiber towel to a new side every time I change panels.

[@saf6996]

Pan, I cant express enough gratitude and thanks for this amazing video. You are really are a master of this craft.

[@PanTheOrganizer]

Thank you so much 😀 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 905,000 subscribers and we have over 117 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@JJP.GT3]

Simply perfect this tutorial dear Pan. It is a luxury to have you in the social networks. Thank you very much for your time and keep growing 👌.

[@PanTheOrganizer]

You are so welcome! Thanks Yesu!

[@chelsabailey1018]

Hello again. Out of curiosity, I researched some of the ceramic coatings that come in a glass bottle (i.e., CQ.UK, GP Graphene Coating, Gyeon Mohs Evo, etc.,) most of them are nearly $100 (USD)! Too steep for me presently. Will stick with Turtle Wax's Hybrid Ceramic Coating and Graphene Flex Coating. Thanks for providing such a great master class on applying ceramic coatings for cars!!!

[@PanTheOrganizer]

Spray versions are a good way to get into ceramic protection without breaking the bank, and they are easy and quick to apply. They will still give you 6-12 months of protection in the case of the products you mentioned from Turtle Wax.

[@marcg1964]

Awesome and thorough review! I just ordered the new imprpved Adam's Graphene coating to apply on my 2017 F Pace. I will be removing remaining Ceramic Pro that is 4+ years old. I'm waiting for cooler fall weather for the 2 day project.

[@PanTheOrganizer]

Glad it was helpful!

[@petegangies]

Hi Pan, given that graphene cant bond to the paint surface, most graphene coatings apparently have a very small amount of actual graphene in them and are predominantly ceramic based. How does this small amount of graphene make the vehicle less susceptible to water spots? I can't seem to wrap my head around it. Water spotting should occur to all coatings, and as you've mentioned will vary based on a bunch of factors. So I'm keen to hear your explanation about how the graphene limits water spotting and now that they've been out a few years, what your real world experience is with that particular aspect of the graphene coating. Many thanks, Pete :)

[@marctrainor5595]

Pan, ,, you knocked it out of the ballpark again with this extremely informative video. Thanks for giving us so many suggested products, especially for guys like me who are just a rookiea at all this. Good job, and "keep em comin". Marc T

[@PanTheOrganizer]

Glad it was helpful! And thanks for your support Marc! I guess you're ready to apply your first ceramic coating now? You'll be happy you did!

[@lewiswilliamsjr1190]

We are the graffiti coating change, white color I only limited to gray vehicles

[@PanTheOrganizer]

Graffiti coating? I don't understand your question Lewis...

[@williamthomastaggart5080]

Pan, great topic and explanation on the process. With your detail and passion, you should have been a teacher. Enjoy the rest of the weekend.

[@PanTheOrganizer]

Thanks William!

[@lpetters84]

Hands down. The best and most detailed SiO2 video on the internet. I do have one question. - I understand I need to use an SiO2 spray (Reload in my case) for maintenance. Just to confirm this would replace a quick wax? Because the quick wax would be that “inferior product “ and would cover your ceramic coating.

[@PanTheOrganizer]

Correct. You don't apply quick waxes on ceramic coatings. You use proper SiO2 spray sealants like CarPro Reload, Gyeon Cure, Kamikaze Over Coat, Gtechniq C2V3, The Last Coat 2.0, Lithium Ceramic Slam, etc.

[@lpetters84]

@@PanTheOrganizer Do you have any tips or products intended for ceramic coated quick cleanings? For ex.. I have a little dust on the vehicle in between washes I would usually do a quick wax for for a quick clean/shine. My current understanding of SiO2 sprays is I probably shouldn’t use them on a weekly basis and could get a bit $$$.

[@brettwilletts]

Great video again, could you please do a video showing us a vehicle/ bodywork that you feel needs a fresh coat of ceramic coating and why you think it needs doing along with the prep required to get it back at its best. This video has given me the confidence to apply my first ceramic coating to my car but i now struggling to work out which is the right time to redo it again and not still keep putting on replenishment treatments. Hope this makes sense. Keep up the great content 👍

[@PanTheOrganizer]

It's quite simple. When a ceramic coating reaches the end of its lifespan, or you simply want to remove the coating and apply a new one, you have to go through all these steps again, from A to Z, including machine polishing. Polishing is the only way to ensure 100% removal of any coating, as mechanical abrasion is needed.

[@rudygonzales2003]

You are freaking amazing in your attention to detail and explanation of processes. I love your channel and have used more than a few of your techniques. And I will say I've been satisfied each time. THANKS Pan

[@PanTheOrganizer]

Thanks for the kind words Rudy! What’s your favourite video on my channel so far?

[@rudygonzales2003]

@@PanTheOrganizer it would be the Bead Maker test you did with the P&S guys and the How to apply ceramic coatings I watch your videos repeatedly as they are literally lessons.

[@PanTheOrganizer]

😁👍🏻

[@seonskerritt7153]

Hey Pan. I enjoyed watching this video- so informative and easy to understand. So much products man - almost lost track. Lol. Again excellent video, you earned my subscription.

[@PanTheOrganizer]

Hey thanks for the positive feedback Seon! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 860,000 subscribers and we have almost 110 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@pjfan173]

Hey Pan, could you please do a video on ceramic coating and protecting a boats gel coat and the vinyl seats

[@francoisroux4989]

Thanks Pan for that publication!! Another good one!! I used your tricks and product recommandation already last year to coat my car with CarPro. It looks really great! Good show!!

[@PanTheOrganizer]

Thanks François!

[@larryt1004]

You have been the only video I found that explained it completely about flashing/buffing process. I think that is the step I missed in all other videos. All other videos talk about it flashing but then talks about how long it probably will take to "sweat" but never really said ok once you see the rainbow effect, start "buffing". So I think after playing around a while, leaving graphene for 1 to 2 minutes versus waiting for it to flash and buffing then made a difference. Obviously this is after all said and I have done the car already. If you have made a huge mistake with pretty much the entire car, what now? Do I just wait till it wears down and reapply in the future or should I ??

[@PanTheOrganizer]

It shouldn't be an issue if you don't see any high spots. If the paint looks good, just continue as is.

[@BitetheWorld1]

thank you, I did start watching yesterday, but I fall asleep 😀 but now I have to start all over. Great tutorials by the way ! Correcting myself I wanted to add the ceramic coating to my business, and wanted to learn step by step, how much would you ask for to put video together ? Prep works, what tools I need, and product. And step by step, to apply ceramic coating.

[@PanTheOrganizer]

This is already the most complete tutorial on how to apply a ceramic coating that you will find on KZbin. All the information is there. And all the tools and products are linked in the description under the video. Thanks for watching! You discovered one of the biggest car detailing channels on KZbin by the way, as we surpassed 706,000 subscribers! I have been detailing for almost 25 years and I love to share my knowledge and passion with my viewers.

[@BitetheWorld1]

@@PanTheOrganizer thank you! That’s great you are doing it over 25 years. I just have to sit down and watch your couple of the videos.

[@PanTheOrganizer]

How did you discover my channel by the way?

[@j.morales3166]

I recently tried a spray on graphene. The interesting thing I noticed was how it collects dirt and dust differently on the rear of my yukon. But the hydrophobic properties are awesome. Once I can actually get the compounding and polishing of the vehicle where I want it, I'm going with a graphene. All that said, I appreciate the video. I tried an Sio2 myself and did an awful job and had to compound it off :-)

[@PanTheOrganizer]

Thanks for watching. I hope you are having a food day J.

[@nazzfitness2341]

Really appreciate the video can you not wash the microfibers instad of throwing them away?

[@PanTheOrganizer]

It's never recommended to reuse the towels and applicators used to apply ceramic coatings. Certainly not on delicate surfaces like paint, as you'd run the risk of scratching and marring the paint. You could wash the towels and reuse them for less important work like engine bay detailing, or shop cleaning for example. I just don't take any chances and throw everything away.

[@georgiosmelissis576]

Bravo Panteli, really nice presentation, I can say the best one about ceramic coating !!!!! Efharisto poli!!!!!!

[@PanTheOrganizer]

Opa!!

[@KuyaPow626]

Absolutely loved the video! My friend shared this with me and now I'm sharing it with a coworker. Can't wait to do this to my car!

[@PanTheOrganizer]

Thanks Juan! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 790,000 subscribers and 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@KuyaPow626]

@@PanTheOrganizer Could I possibly email you a pic of some damage I just got on my car? I need advice because this happened to me before I could apply ceramic coating 😢

[@TripleGAutoDetailing]

Epic video Pan!! Never gets old!! Blessings from USA 🇺🇸

[@PanTheOrganizer]

Thanks!!

[@nasdoc1]

Wow! What a video. I loved it. Already watched it twice. I feel super confident now. The only thing is that I don't have the tools to polish my car. So if I can't polish my car then I'm scared to clay it lest I introduce micro-marring into the paint work. Rest all I can do.

[@PanTheOrganizer]

You always learn new things by watching my videos! Glad to see you’re catching up with my 700 videos! 👍🏻

[@jd3jdm]

Hi Pan, great videos - very informative and as an engineer, appreciate the level of detail! I’m curious if you’ve tried the Revivify coating products? It appears to be a type of ceramic-based coating but with some unique properties. Trying to find some real head to head comparisons and think your channel would be a great spot for it.

[@PanTheOrganizer]

Thanks John! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 865,000 subscribers and we have almost 110 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. I haven’t tried Revivify products.

[@phillipblack1276]

Great info Pan. Especially the honesty about the durability expectations and factors.

[@PanTheOrganizer]

Thank you Phillip!

[@Mike_Spina]

Pan the teacher!!! this will help alot of ppl!! thanks Pan!

[@PanTheOrganizer]

You are so welcome!

[@coelement8321]

Pan, honestly this was such a great video. So detailed, thoroughly thought out. 🙏 I do feel a lot more confident attempting a coating. I have clayed my car already and done a paint correction/machine polish a few weeks back. I might do another machine polish as I can see some minor swirls here and there. Is it okay if I do a final machine polish right before I apply the coating? Finally - it sounds like graphine is the way to go as it’s more advanced. However, I am a newbie and this will be my first coating DIY. Are there any products you would recommend for me because it’s my first kick at the can? Thanks again for your great content Pan! 😊🙏

[@PanTheOrganizer]

Thanks for the positive feedback. Yes you can polish the same day as you apply the coating. But always do a paint prep spray step after polishing (to remove polishing oils) before applying the coating. Don’t worry about graphene vs ceramic. What we learned is that graphene coatings are built on a ceramic base with a bit of reduced graphene oxide in them. What is more important is buying a coating from a reputable brand. Here are my top picks in my awards video: kzbin.info/www/bejne/gYPZaKmBqNqfn7Msi=nCkE_mMKfpuuvS29 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@hornblower45]

Good morning Pan! Trust you are well.Brilliant show as usual ! Now spring is here, I want to try and put a ceramic coating on the car with no access to a garage. Every day this week, I have had bird poo on the car. What would be the solution to taking poo off, if the car was hit say 1 min or so after you have applied the coat. Looking at applying Mohs. Many thanks in advance.

[@chadbjork7907]

Outstanding videos. I love your content. I'm just a weekend DIY. Who loves to keep his vehicles clean

[@PanTheOrganizer]

Thanks Chad! How did you discover my channel?

[@DerickHo]

after watching your video, i decided to get a full set Carpro ceramic coating for my new Mazda 3

[@PanTheOrganizer]

Good choice! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@rushodai929]

Awesome, really like the tip about high spots, and about downgrading/disposing the microfiber cloths used for ceramic coating.

[@PanTheOrganizer]

Glad you enjoyed it!

[@BoostAzul_FK8]

Best video on steps to ceramic coat! 🥇

[@PanTheOrganizer]

Thanks!

[@scootytamra]

I have been learning alot about car care from you, but this is all over whelming, can you explain for a newbie like me who can't afford to have my car detailed but want to take care of my poor 12 year old Ford Focus right, and has no access to water except a do it yourself car wash, what can i do to maybe wax my car at home that would be simple after i give it a bath and dry it? I've been purchasing things little by little from the chemical guys line, i know this is long winded, but simple stuff for me is best!

[@WARMEZ911]

Hey Pan another great video! I have learned so much from watching your channel! You are great at explaining everything & have a lot of great tips! Thanks!

[@PanTheOrganizer]

Awesome, thank you! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@WARMEZ911]

@@PanTheOrganizer I purchased my 23 Civic Sport in July. My old car I didn’t really spend much time cleaning as it was pretty old so I would just run it the the auto washes. Of course I want to do everything I can to keep my new car looking great so before I washed it the first time I came to KZbin in search of tips on the best methods. I had watched some other channels then one search “I don’t remember exactly what for” I found you & I have been watching since. I subscribed & turned on the notifications so I never miss one. You are great at explaining things so that even us newbie’s to detailing our cars can understand & put into practice! Without watching some of your video beforehand I definitely would have made some mistakes & possible damage to my car! Thanks for everything you do!

[@joshhalter601]

great info! love how much detail you go into for each product with prep and aftercare included! I am starting up my own detailing business and was wondering which of these product sets you would recommend for professional use?

[@artisanlandscapedesignsllc9812]

Pan I own a landscape design company. I’m upgrading my 2020 Ford f 250 to a 2022 Ford f 250. I plow in the winter and haul equipment and materials daily during the season. This is an everyday truck for me as well. So a couple questions. 1.) Which product would you suggest to coat the exterior of my truck with? I’m looking for durably and shine. 2.) What product would you suggest for the interior coating? Mainly the leather seats since I’m usually pretty dirty during work days. I have seat covers right now because I’m afraid of ruining my current truck. Thanks in advance. I’ve watched a ton of your videos

[@PanTheOrganizer]

Hi! A ceramic coating would be the best protection for your truck. If you are doing the work yourself, see what paint coating and leather coating I did to this new vehicle: kzbin.info/www/bejne/qputgZaaeLqUgZo

[@homevid]

again, excellent tips!!! Many thanks! Cheers from Belgium ;)

[@PanTheOrganizer]

Glad you like them!

[@towerofpower3980]

Hey Pan! Awesome vides...very informative and educational. I had a friend tell me they had spots after using the turtle wax graphene coating. He told me he did go back over with a damp cloth and other drying rag to remove high spots, but still had spots. Is there something else he should be doing?

[@ricardoseales6501]

Pan you are the best in what you do I watch all your videos .

[@PanTheOrganizer]

I appreciate that! What's your favourite video on my channel so far?

[@ricardoseales6501]

On detailing and ceramic coating so much pertinent information and how you should apply them to get optimized results .It is your you tube channel that actually educates the car enthusiasts about how to properly maintain on the do's and don'ts .

[@chelsabailey1018]

Hi Pan! Thanks for sending me the link for this video. It is intensely detailed. I won't be able to duplicate all of your steps, products or equipment but will do my absolute best to keep it as clean as I can. Question...do you do ALL of these steps each time you wash your car? Also, without a polishing pad, will I still be able to keep my car's paint shiny with either the Turtle Wax Ceramic Coating or the Turtle Wax Graphene Flex?

[@PanTheOrganizer]

No you only do this entire process once, as true coatings last for years. Once applied, you do a maintenance type wash once every 2-3 months to maintain the coating. You use a ceramic topper during those maintenance washes. Here’s my tutorial on a maintenance wash for a ceramic coated car: kzbin.info/www/bejne/f6KsiGpue9KFj7csi=S8hZdR4UAi7BAmV2 Other than that, you can simply wash your car as often as you wish with a wax-free pH neutral car shampoo.

[@mrnicetomeetyou3646]

Recently bought my dream car a simple one c43 and i been looking into a ceramic coating so many people been telling me to do this and a paint correction before

[@PanTheOrganizer]

Now you know how to do it right. Since you bought a C43, watch a video I made about ceramic coating a Mercedes AMG C43 coupe here: kzbin.info/www/bejne/o5KlcnyLo9WgnZY

[@mrnicetomeetyou3646]

@@PanTheOrganizer thank you

[@FloxerTV]

Hello Pan! It's a pleasure to wath any of your videos and see the dedication and professionalism of these. Congratulations for your entire success in KZbin. I have been watching your videos since 2016 and I've learned a lot with you so thank you very much for that. I have a question about the maintance of the Graphene Coating, I regulary use the Meguiars Gold Class Shampoo for my waxed car but I'm ready to use Graphene Coating and I'm not sure if this shampoo is compatible with that. Regards from Chile, Helmuth R.

[@PanTheOrganizer]

Thanks for the positive feedback! I appreciate it. Merry Christmas! Meguiar’s Gold Class shampoo is ok on coated cars, but there are better shampoos available like CarPro Reset which is my favourite for ceramic or graphene coated cars.

[@Korruptor711]

I'm just getting started with learning all of this, but my current car has clear coat that has peeled off. I'm considering trying to repair the clear coat and practicing making this car look really nice before I buy a new car. (This car is worth nothing on trade in and I'm getting a new car next year)

[@danieln1988]

Hello Pan, thank you for your videos. I just bought my first car and I've found a passion for detailing after watching your videos. Just have a question, if I get a ceramic coating, can I maintain it using only the washless method of cleaning (using ONR)?

[@PanTheOrganizer]

Thanks Daniel! Yes you can clean a coated car with ONR, but at least once every 2-3 months, I recommend that you apply a silica spray sealant to maintain the protection like in my tutorial here: kzbin.info/www/bejne/r33MloOHh7J5mZo

[@siddhantpahwa8933]

Hi Pan! Thanks for taking the time to craft such detailed and great videos. Love your work. I have a well maintained 2 year old Jeep Compass with minimal swirl marks and scratches and I want to go for a Graphene Ceramic Coating for my car. My local car detailer confirmed that the whole process can be completed in a single day. Is this a red flag that they’re cutting corners to save time?

[@PanTheOrganizer]

If the paintwork is in good condition, with only light marring or swirls/scratches, it can absolutely be done in one day. On new cars, it usually takes me 10 to 12 hours on average for the total interior/exterior new car prep, including washing, decontamination, light polish, paint prep and ceramic coating application. It's only on super neglected paint, or paint that has tons of swirls and scratches, that it make take a few days for the entire process, as polishing steps alone could take a day or two if you're doing a 2-stage or 3-stage polish, or perhaps water sanding in there too. The length of time it takes to detail a car depends on many factors, including the state of the vehicle, the extent of the work needed, the complexity of the products used (for example some coatings only require 1 layer, others 3+ layers) and of course the experience and efficiency of the detailer himself.

[@itisaporsche]

I love Pan! I like to outline any PPF with 1/4" pinstripe to keep compound/polishes out of the seems. Simply do all my work over it... thoughts?

[@ninjataisen2007]

This video has everything, thank you for going through the trouble!

[@PanTheOrganizer]

You're welcome! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 840,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@ddautodetailing]

Very informative Pan! I was able to ceramic coat my vehicle awhile back with all of information from your channel!!!

[@PanTheOrganizer]

Cool! 👍🏻

[@jsclayton]

On durability and longevity, how do you identify when a ceramic or graphene coating is wearing out and needs to be reapplied? Are there any prep differences between an initial coat like this video and preparing for a fresh coat over a worn out coating? Are there issues switching and trying a different product? Thanks, Pan!

[@PanTheOrganizer]

When you're getting close to 80% of a coating's expected durability and if you see the hydrophobic properties starting to diminish, that's a good visual indicator the coating has weakened to a point where it's a good thing to start thinking of restarting the steps, including machine polishing, and reapply a fresh one. So when you see water beads that aren't as round and tight, or when the water starts to slow its sheeting rate, you know the coating is on its last leg.

[@philc8620]

Hello again Pan, i just received my AvalonKing armour shield ix ( thanks to you ) and i can't wait to put it on. There's just one or two things i need help with. How to wash your ceramic coated car in the winter if i don't have a garage? What is another excellent topper/ ceramic sealant i could use besides "The last coat"? Thank you.

[@hsratra100]

Superb detailing… a to zee… well done Pan.. your passion reflects in your words clearly. Well done.. 👍🏾 God bless.. 😊

[@PanTheOrganizer]

Thank you so much 😀 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 870,000 subscribers and we have over 110 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@Follett2121]

Incredible video! The fact that you’ve shot the same video, but in two languages is amazing! Keep it up :-)

[@PanTheOrganizer]

Thanks Kyle! It's an insane amount of work to produce just one video, so yeah you are 100% right, doing it in two languages is nuts!

[@mr_smilegaming8842]

You can safely reuse the towels. Prepare 4 gallons of water with microfiber cleaner solution in it. Soak the towels in that bucket immediately after use. I have done this over 5 years of ceramic coating without a problem. Another good practice is that I use 8-12 towers per 1 layer of ceramic coating on 1 sedan car.

[@HassanALi-17]

Thank you for going through all of them, and braking them down in details. Quick question for you. Which one do you prefer Regular Ceramic or Graphene coating ?

[@PanTheOrganizer]

Both perform near the same in the grand scope of things. It's to be noted that most graphene coatings are a ceramic coating with reduced graphene oxide (RGO) infused in them. Just pick a brand you like, and if they make a coating, it shouldn't matter if it's graphene or ceramic.

[@HassanALi-17]

@@PanTheOrganizer It just because I noticed in my Nano ceramic coating (3 layers) a Month old. I saw a water spot. Lucky, I used another microfiber towel and its gone without using any water spots removers. In addition, I heard you noticing the common problem in Nano ceramic which is the water spots. As result, I would definitely use Silica Spray coating (Graphene) As a topper to get rid of this common problem.

[@HassanALi-17]

Also, just bought a brand new car. I let “ Ziebart” get the job done. Before discovering your channel, But I will try to maintain it as I learned from watching your VODS tips and tricks.

[@PanTheOrganizer]

The only permanent solution to water spots is to get a simple water deionizer to have ZERO water spots. See my video: kzbin.info/www/bejne/f3yxfWSZnaaEjrs If you don't have that, always make sure you work in the shade, never in direct sunlight. Frequent washing also helps prevent water spots from etching the paint and leaving permanent damage. When drying, use a drying aid with a quality microfiber towel. Also, you can use a spray topper for your coating, that will reduce water spots, by evacuating the water quicker through water sheeting. This product is great: bit.ly/3KdJ4Ty If you see water spots after washing and drying your car, you can use a water spot remover spray like CarPro Spotless 2.0 or Gtechniq Water Spot remover. Always do this first, as it's the less aggressive. You can also use CarPro Descale shampoo to wash your car, it helps remove the minerals from the water spots. Link: bit.ly/3OKqO4u If you have tried all these methods and still see water spots, you'll have to machine polish the surface, at which point you'll also remove the ceramic coating unfortunately.

[@HassanALi-17]

@@PanTheOrganizer I did wait until midnight to wash my car and let the body cool down. Since it’s been setting outside, and my dad’s car in the garage. I do live in an area where the temperature reaches 50 C in the noon. So, I know that I have to wait until the body is completely cooled. I will keep what you said in mind! Appreciate it Pan.

[@DJR5280]

Thanks for the video Pan. A few topics I'd like to see is input on the different types of coatings. For example, Apex Detail and DPC use TiO2 in their coatings where as others use Graphene. What are the benefits to both and which would disperse heat on the surface better? What is your input on using waterless washes to clean your ceramic coated vehicle? Adam's for example has a new more advanced coating that just came out this week. Any thoughts on that product? And lastly, can we use different brands of soaps and toppers with different brands of coatings? If I go with Adam's Ceramic Coating can I use Ethos to maintain and revitalize the coating? Thanks Pan and if anyone has any input on these questions please feel free to respond.

[@ChrisRogersTheAngryChef]

Just spent the day paint correcting, doing Adams Advanced in the morning.

[@PanTheOrganizer]

You can do it! Here's the video I made on the application of the Adam's Advanced Graphene Ceramic Coating: kzbin.info/www/bejne/n5W4Zoupfbmdbbssi=7SGY8mUT28I-bv2s

[@lewisreinhold6398]

Absolutely fantastic video Pan!

[@PanTheOrganizer]

Glad you enjoyed it!

[@dbabskiautodetailing8254]

Great video again! Really enjoy watching your videos.

[@PanTheOrganizer]

Glad you like them! What's your favourite video on my channel so far?

[@dbabskiautodetailing8254]

@@PanTheOrganizer I do like the one that you did with @Fabautomotivedetailing with the coating comparison and the fire test. I also like your older video of your garage tour of all your chemicals and equipment. One day I hope to have a garage shop but for now I’m just mobile. You put a lot of time and effort in your videos which I’ve tried but just don’t have the time for. You always do a fantastic job on your videos and your work alone🙏🏻

[@davidrucker1000]

I race fiberglass sailboats in the ocean and store them out of the water. I'm interested in applications to the above water and below waterline usages that reduce surface tension and provide a faster boat. Any thoughts?

[@TJZTechShow]

Hi Pan! Do you know how long ceramic coatings are good for after opening the bottle. For example, can I open the bottle and use some one week, seal it, then apply the rest a few weeks later?

[@PanTheOrganizer]

Hard to say as it can vary from one brand to another. Unopened, chemicals are usually good for 1-2 years if kept in stable conditions and not frozen. But once opened, it’s open for debate. Many chemists I spoke to say 1-2 months at best.

[@charleyschaubroeck6301]

Hi Pan. I applied 2 layers of CarPro C.Quartz UK 3.0 and 1 layer of Gliss. I waited 48 hours to drive in the rain. Now I will wait 2 weeks until I wash it. Can I use CarPro Reload or EliXir every time after I washed my car as an extra sacrificial layer to protect mainly against water spots? Thanks 🙏🏼

[@throwingsparks]

The BMW @ 30:13 absolutely glows, If your going to have a white vehicle, this is the look to shoot for!(IMO)

[@Espinal_424]

almost 18k views and only 900 likes and 22 dislikes smh. Love your videos brother and have helped me a lot. I appreciate you

[@PanTheOrganizer]

Thanks for your support Luis!

[@jmk2888]

Thank you for another great video. 👍 Question : Graphene Coating Adams vs Glass Parency Which one is better? Also which topper of recommended after Graphene ? Thanks in advance and keep up the great videos

[@PanTheOrganizer]

I’m testing both in my 20-way paint protection real world test here: kzbin.info/www/bejne/kHWxmWuVhtqFrLM For toppers on graphene coatings, you can use the same products as on ceramic coatings: silica spray sealants or graphene sprays.

[@HoldenTyner]

Just bought a new 2024 Toyota 4Runner. What is the ideal exterior process for its first wash/protecting? Thanks :) love the channel!

[@PanTheOrganizer]

Congrats on your new Toyota! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. A new car is never new until it's properly detailed. - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzbin.info/www/bejne/h5jSqqV5Ypp2g8U So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers: Audi RS6 Avant Performance: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=mcQiMs9HBLlaqjGK Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Tesla Model Y: kzbin.info/www/bejne/q4eagoqtrtqDgpY Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8