I wanna like this video twice. Please more Trent’s Talk. You guys are awesome.
@kruesioriginals4 ай бұрын
😊😊🤘🏼🤘🏼
@christian_esquivel3 ай бұрын
Vlog #88, feels special.
@joebrett55444 ай бұрын
Hahahaha NAHHHH. Not the MMI GUY. 😂😂😂😂😂 I knew he looked familiar. That Continental Tire add just FINISHED ME 💀💀💀💀💀💀
@kruesioriginals4 ай бұрын
😎😎😂😂
@Seaniesean1114 ай бұрын
Good job Trent!
@mahendra24354 ай бұрын
PUTTHE BARING, IN THE FREEZER .......THAT IS SO COOL
@kruesioriginals4 ай бұрын
And refreshing
@lummoxoverlandadventures10724 ай бұрын
Willie Nelson on 4/20! Figured I'd subscribe.
@kruesioriginals4 ай бұрын
It was great
@Pompomgrenade4 ай бұрын
Yeah 🔥yeah. 🛠️Tinkering with trickbiketrent 🙈
@mahendra24354 ай бұрын
AWESOME SHOP AWESOME PEOPLE
@angus_white4 ай бұрын
trents dyna looks so god damn clean!
@michaelangeles65484 ай бұрын
Forgive me father kruesi for I have hell yeah brother’ed
@kruesioriginals4 ай бұрын
😂😂😂😂
@brakinggnus52294 ай бұрын
Good job, Trent! Been awhile since I had the primary off.
@joebrett55444 ай бұрын
That motor is clean as fuck that grey goes CRAZY
@smiley42884 ай бұрын
Yup left that in there too once…you only do it once!!! 😆🤘😎🤘
@kruesioriginals4 ай бұрын
That’s for sure
@garyehrhardt31364 ай бұрын
Good stuff Trent
@alpinestar11234 ай бұрын
Love the purple and gold man. Gunna be sweet
@kruesioriginals4 ай бұрын
We’re pretty stoked on it.
@millertime2694 ай бұрын
Robert De Niro had a kid that now works on Harleys 😂
@kruesioriginals4 ай бұрын
😂😂😂
@mahendra24354 ай бұрын
Thanks!
@kruesioriginals4 ай бұрын
Thank you 🙏
@robinfilbey4 ай бұрын
Curious to see it done. The paint brings it together he says, lots going on there
@kruesioriginals4 ай бұрын
It’s gonna be wild. It’s gonna look like a toy.
@djdeadweather37684 ай бұрын
No spacer behind rotor? Primary chain alignment and spacing of clutch and compensator assembly is a topic nobody seems to cover adequately....good video anyway thanks for making it
@kruesioriginals4 ай бұрын
If your running all stock stuff it’s unnecessary
@andybyrne35424 ай бұрын
El Padre Kruesi
@kruesioriginals4 ай бұрын
Si
@robertross42744 ай бұрын
Cycle electric all the way 👍🏼
@adamhill27884 ай бұрын
Trent's dyna build is fire #WeldersForTrump🤘🛵
@kruesioriginals4 ай бұрын
Let’s gooo
@dormantmenace4 ай бұрын
I thought the auto tensioner suck cause they over tighten the chain if you tend to roll off hard from high rpm. Supposedly, they eat up the slack when the motor engine brakes hard.
@kruesioriginals4 ай бұрын
Yes, they do suck. I do not like them. You need free play.
@dormantmenace4 ай бұрын
@kruesioriginals ya, i wouldn't think the comp or inner primary bearing appreciates the strangling of a tight chain.
@mc6044 ай бұрын
Padre Kruesi ha!
@kruesioriginals4 ай бұрын
😎😎
@stewstew97563 ай бұрын
Whats up with the fins on the rear head? Why didn't you shine the edges?
@tnhooligan4 ай бұрын
Saw the vettes for sale. I think you being a fab guy with experience with trucks you should build a silverado for drifting. I think it would cooperate more for you. Vettes are notorious for being a pain in the ass. Or take your vette money and buy a s550 mustang. All those need is an angle kit and coilovers and they are ready to SHRED. And if you want a bunch of power the 5.0 just needs a blower and can make more power than your vette and be just as if not more reliable. Just a thought
@robertrodriguez24124 ай бұрын
There's a dude walking around the shop behind you!
@joshuamiller8524 ай бұрын
What brand is that tensioner? Been trying to find an automatic one for my early model too
@kruesioriginals4 ай бұрын
Call the shop, that’s a Trent thing. I don’t like them
@TruckerMatt014 ай бұрын
Any update on the bagger k bars
@kruesioriginals4 ай бұрын
I’m going to build one today, then we’re going to build a jig off of it and go from there
@coreyriggle4 ай бұрын
Where can I get that clutch cable clamp? Thanks.
@kyleshaub42784 ай бұрын
Trent speaks the truth, replace their charging system, but don’t just replace one component…
@kruesioriginals4 ай бұрын
Amen
@JJ-ey2rx4 ай бұрын
When’s a good time to call to go on a date with Ry….I mean get my bike worked on
@noonespecial12174 ай бұрын
Trent, that bike is super sick dude. Dig the black powder from the old blonde. Props on taking her all the way down to the frame. That’s how I did my late model Dyna. Ryan ripped it when you guys were down in San Diego. Thank you to Kruesi for letting you rock the mic while he wrestles with the Vette.. again😂 Hang in there, Ryan! Your Trump impression is coming along too. Skip to 13 seconds in. U only need 30 seconds of watch. kzbin.info/www/bejne/jajKq5aOo7R7r6ssi=z0NnOxoL37gdiXkG
@kruesioriginals4 ай бұрын
🤘🏼🤘🏼🤘🏼
@0stblocklatino4 ай бұрын
Random question: How much max. torque would you recommend to this job when buying a new Impact wrench? I don't wanna go overkill, but a want to buy a good allrounder
@jaredspencer73754 ай бұрын
Are back head fins not cut on purpose?
@kruesioriginals4 ай бұрын
Different heads. Just worked out that way
@astralis21944 ай бұрын
we like the tinkering with trent thank you for the content
@tainted15814 ай бұрын
You guys ever run a solenoid push button starter? I got one and rate it.
@hooniganruiz56134 ай бұрын
Rate it?
@kruesioriginals4 ай бұрын
No. They make a good back up, but they tend to weld themselves in the in position, then yr f@cked
@tainted15814 ай бұрын
@@kruesioriginals Thats good to know lol. I'll go buy another relay then haha
You think that dude that called bitchen about the hardware watches your videos?
@patrickhollis53324 ай бұрын
I know y’all rite TRUMP#2024
@jessespenc4 ай бұрын
It won’t let me like the video for some reason
@OffandOn134 ай бұрын
IT? Like in the evil clown with the red balloon? Woah...
@kruesioriginals4 ай бұрын
Are you signed in?
@Armed3604 ай бұрын
Sad watching you talk about the vette in past tense now that you’re selling it. Wtf!
@hooniganruiz56134 ай бұрын
Hes selling it??
@kruesioriginals4 ай бұрын
Maybe not. I was just pissed, already fixed most of it
@Armed3604 ай бұрын
@@kruesioriginals you shouldn’t!!! I know the little and big shit can be frustrating but hot damn it’ll be even more rewarding with the finished product. Don’t give up on it, because that thing will be a beast when all said and done
@mathewkendell90564 ай бұрын
I keep eyeballing the Screaming Eagle banner/poster in the background. Seems like a lot of negative opinions on a lot of the so called “performance” SE parts. Would you consider doing a video on the Kruesi “approved” SE parts? Whats worth the money whats not and comparing to what else is available on the market and the benefits to one vs the other including cost. I think its safe to say that a large majority of Harley owners do at least an exhaust and an intake. Clearly some people just do it for the sound and appearance more than the true performance benefits. Some likely do it because its the status quo. Then there are people like myself who within reason could really care less what it looks or sounds like but just want to experience the absolute best actual felt and measurable performance gains from their hard earned dollars being spent. It seems like most people who aren’t building a designated stunt, drag, or race bike but are putting together a bike that they primarily ride on the road don’t start with a one time drop of $7,000-$10,000 dollars in aftermarket parts. They ride the bike and throw a few bucks at it as they go. Exhaust and an intake, a seat, some bars, suspension ect ect just not all at one time. Maybe you could include a recommendation on what order to go in. Suspension first? Cam first or intake first? Exhaust and a tuner next? In other words if I am building as I go and don’t want to buy parts that incompatible with future upgrades what is the best method of approach? Appreciate your wealth of knowledge and willingness to openly share it. Keep up the amazing work.
@kruesioriginals4 ай бұрын
It’s a really long comment. I honestly only read the first bit. Screaming eagle parts are good. We only use Harley Davidson Pistons for the most part.
@Fitzz784 ай бұрын
Trump is the MAN! Trump 2024 bby
@adamhill27884 ай бұрын
Dat's riite 🤘
@stephenaaron76284 ай бұрын
I hear hale makes some nice 12pt arp bolts you could probably get from him for your primary. Makes them himself too, that’s kinda cool.