how to attach a derusting weeding wheel

[@MataH1]

Same problem as everyone else, I bought this attachment trusting it would fit my Ryobi. It came with no attachment parts and didn't fit my Ryobi. Wanted to return but couldn't find any indication to do so. No address, no name, nothing. Bought it through Facebook and cannot retrieve the post. What a rip-off! Thanks for the video, will try that.

[@IRISHSALTMINER61]

Thank you, I’ve just found my don’t fit… Ya live and learn, blessings

[@lorimcgath6527]

Thank you...I just received mine in the just today..yes the instructions on their website is horrible...I have battery operating weedeater because it's light and easy for me to handle having RA in my hands. Thank you for informing me that I now need to buy a brush eater...I was counting on this to fit my yardworks weedeater. You have been very helpful. Thank you From ohio

[@sternandcrew]

Let mi no if the fitment works wit our batterytool an be careful with the vibrations if u have ra

[@ruthg7388]

I am SO glad I found your site. Thank you!

[@sternandcrew]

Glad to be of help ye mon

[@Hedriks]

thanks for that. I've had a headache trying to match attachments.

[@StephenBlythe-p2g]

Very good peice of kit very happy this video helped alot

[@RnB832]

Can you send the Amazon link please?

[@andrewandreski2659]

This video helped me so much! I had the Ryobi bush wacker attachment already, so I was lucky, but if not this would have been a major pain.

[@sternandcrew]

Ye mon glad to help

[@kingisrael1532]

Thanks I'm glad that i already had this expand it add on. Funny i just used it last week. Thanks for the heads up bredren.

[@superk6487]

Cheers bruv 👊 I made the same mistake as it doesn’t fit my makita. Thanks for the knowledge ie info

[@sternandcrew]

Ye mon glad mi cod help

[@vietrandy1]

Thank you. Great help. Question? Should you use a washer when applying the nut? I noticed you just screw on the nut without a washer. Thank you 😊.

[@vietrandy1]

Most torque tightened joints do not use washers because their use can result in relative motion between the nut and washer or the washer and joint surface during tightening. This has the effect of changing the friction radius and hence affects the torque- tension relationship. I just saw this. Also, the manufacturer recommends 325 inch pounds to tighten the nut.

[@sternandcrew]

I didn't use a washer but don't see y u codnt I just stuk to what was in the kit

[@rodneywilliamson6048]

The owner of the Derusting Wheel should’ve let us know about all of this. Plus sending the correct attachments with it!!! Shame on y’all!!! Great video

[@sternandcrew]

Ye mon thanks for viewing

[@ICUTGRASSLLC]

Just got this attachment today and also bought a Stihl trimmer for it- I run Echos. Habe wanted this attachment for driveway cracks.

[@sternandcrew]

Hopfuly it works good for u I ended up sending it back be careful if yo hav any soft spots or bad. Craks in driveway it can loosen some of the area and send projectiles

[@jeffwschoenfeld]

I wish they told me I needed a bushwhacked head. There were no directions

[@sternandcrew]

Seems to be tat way with a lot of stuff so I try to mak videos as detail as possible hope it was helpful

[@theblade66]

I have the same wheel as you, I couldn't fit it to the sthil different thread on the nut. Also the spline doesn't fit over the original one on the machine

[@Cheesehead1966]

Awesome. Thank you for your help.

[@edwardmaclean1135]

received the wheel but no other parts. they would not send the parts. lost my money big scam

[@marciacarver3214]

I just got the trimmerplus in yesterday. But I didn't realize it is an attachment. What is the name of the part I need to attach the trimmerplus too? If I can't get the part that makes the trimmerplus go, then I will need to send it all back and give up. Thank you

[@sternandcrew]

Honestly I wod just return it u arnt Goin to be satisfied with the results I hav better results with my regular weedeater if u use this item it vibrates yo hand very hard and u have to put pressure on the tool for it to do anything and it can damage stone r a flat surface fast and they wear dowm an unravel fast but the attachment is called a brush cutter

[@kathymason6388]

I would like to see how you got the bolt off the bush wacker attachment. I tried impact driver with every bit I could and it will not budge.

[@sternandcrew]

Unless the bolt is seized it shod come off wit a impact for sure and make sure your goin the rite way to remove tink it was reverse tred hope this helps

[@kathymason6388]

@@sternandcrew Boy, if someone would sell one of these already attached they would sell.

[@sternandcrew]

True

[@MusicLaLam]

Thank you. That was really helpful 🤗

[@traceyvaccarello7143]

Thank you for your help.

[@xrpvegas5407]

Thank you that was very helpful❤

[@sternandcrew]

Glad it was helpful!

[@guymontefinese7334]

I bought worx trimmer doesn’t look it will work or fit

[@jdjin291]

My echo srm-225 has 11 teeth and cant seem to find a adapter or proper piece to attach the derusting wheel to my trimmer ive looked on amazon and google so either im not looking correctly or theres no way to find the attachment kit to fit 11 teeth

[@sternandcrew]

Tink for the echo and sthl they are dealer part specifics tats y I didn't get ether of the 2 they don't play nice with universal parts u mite get lucky wit a small mom an pop shop tat make parts but I never find one

[@jdjin291]

@@sternandcrew thanks

[@murrayroadstrong]

@@jdjin291did u ever get it to attach to the echo trimmer? I’m having the same problem

[@prettyporter9688]

Very helpful!

[@rn2368]

mine came with no screws

[@sternandcrew]

I would just send it back

[@felixrudder5796]

A misleading headline - need to know how to change the spline so that it can fit a $9Wattt Ryobi. there must be away to installed a diffrent spine

[@MrDaiseymay]

What a palava I've had with this Wire wheel, NO fittings, NO instructions, NO money back. They do NOT, fit every Trimmer. But you have to find out the bloody hard way. I see that Amazon and Ebay, now list the makes and models that they WILL fit. I've got my Bank on the case, trying to get my money back. best offer so far, 70%, ''because of 'COVINE'. jeeeeezus.

[@ikietaylor4294]

I have the same problem. There is no way to contact them. The (false) advertising said it fits all weed eaters, but it doesn’t fit my Stihl!! Don’t buy this junk!!

[@debbiekent4986]

Thank you

[@sknox1394]

Wish I’d found this video before I’d bought it to fit my qualcast. Needless to say it doesn’t fit!

[@NathalieF]

This is a very over rated product... don't waste your money...