How to balance the DJI RS2 like a Pro

How to balance the DJI RS2 like a Pro
. Fast & Simple.
DJI RS2 LINK - click.dji.com/AJDi49YLPBF1RF4IZHJpTQ?pm=link
In this video I show you how to balance the DJI RS2 fast, professionally and correctly. Make sure to attach ALL your accessories to your camera and gimbal arms BEFORE starting this process!
If you have any questions at all about this video, post them below in the comments and I'll make sure I get back to you.
► SOCIAL MEDIA
⚡︎ INSTAGRAM - @phillipskraba
⚡︎ WEBSITE - www.phillipskraba.com
► AFFILIATE LINKS
⚡︎ GEAR:
SONY A7III - geni.us/Iw1B
SONY 16-35mm GM - geni.us/5e1B
SONY 24-70mm GM - geni.us/DLkhS
GOPRO HERO 9 - geni.us/Lz8PJ
GOPRO HERO 7 - geni.us/kriS4l
DJI MAVIC 2 PRO - geni.us/hshq
DJI MAVIC MINI - geni.us/NNAjwgV
DJI OSMO POCKET - geni.us/ab0be
DJI OSMO POCKET FREEWELL WIDE ANGLE LENS - geni.us/qFWvTkc
⚡︎ MUSIC & SOUND EFFECTS
ARTLIST - bit.ly/34KObqt (+ 2 months free when you subscribe)
ARTGRID - bit.ly/2Z3XMoT (+2 months free when you subscribe)
► LINKS
⚡︎ MY CAMERA GEAR - kit.co/phillipskraba
⚡︎ THE MUSIC I USE - artlist.io
⚡︎ LUTS & PRESETS - Working on it...
LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
By using the affiliate links I earn a small fee of your purchase, it does not cost you anything extra to use them. They help me to be able to create more videos for you. Thank you for the support! As an Amazon Associate I earn from qualifying purchases.

[@iamzaccarter]

Appreciate this video I’ve struggled with this off and on depending my my lens! This is video is straight and to the point no fluff!!

[@blueman841]

Simple clear, and straight to the point. Excellent video. Thanks very much for posting

[@PhillipSkraba]

You're welcome!

[@diezalworldtv8718]

Thanks for just showing us to fix it and not talking for 15 minutes about your overall knowledge. Very informative and worked perfectly!!

[@PhillipSkraba]

It would take much longer than 15 minutes to talk about my overall knowledge, maybe 17/18 minutes. Thanks for dropping by!

[@elaineross9365]

This video really helped. Re the pan axis balance the manual says tilt forward however DJI official tutorial on KZbin says tilt backwards. This video helped to clarify it should be in fact, tilt forwards. And I didn't know about the balance test until now. Super helpful as it give the re-assurance I'm not burning out the motors. Thanks, you got a sub!

[@PhillipSkraba]

I'm glad this helped you Elaine! Yes, tilt forward sideways, it's like a 45 angle tilt to get it right, slightly odd. Forward and to the right. Happy to have you on board, I am working on a few more RS2 videos so hopefully will drop soon.

[@erayyenigun8136]

Thank you Phillip, it was the fastest and simplest video I've ever seen.

[@PhillipSkraba]

You're welcome Eray, I'm glad it helped!

[@hhfilm]

One of the best tutorial i ever come across till now!!!! 👍👍👍

[@PhillipSkraba]

Thank You!

[@pwhiteheadnj]

Thank you! Great tutorial! Just got my RS 2 today and this tutorial helped me a lot. Straight to the point!

[@PhillipSkraba]

You're welcome Paul! I'm happy it helped, have fun with the RS2, it's no doubt the best out there!

[@pwhiteheadnj]

@@PhillipSkraba The cable doesn't come with the combo for the Canon 5d IV? Do you know this or not?

[@pwhiteheadnj]

NVM pal, problem solved!

[@PhillipSkraba]

Good to hear!

[@siphesihledlamini8557]

for me, this is the best video explaining how to properly balance this gimbal. THANKS, A LOT

[@PhillipSkraba]

Thank You!

[@ConsciousLivingTV]

excellent tutorial, easy and much better than many others. thanks!

[@PhillipSkraba]

Thank You!

[@PINAPLI]

The best quickly tutorial! 👏🏻

[@PhillipSkraba]

Thank You!

[@mjj21]

Thank you loads for the quick and efficient tutorial...much appreciated..♥

[@PhillipSkraba]

You’re welcome, happy to help!

[@kelb89]

The best tutorial on KZbin. Thank you.

[@timelesscoley]

The absolute best video on balancing the RS2 !!!! 💯🙀🤩

[@PhillipSkraba]

Thank You!

[@tomdoolin2415]

Philip just like to say thanks for sharing your excellent knowledge much appreceated

[@PhillipSkraba]

Thank You so much! I'm happy I was able to help.

[@TOKIRDA]

Thanks phillip! I always balance from you vide. it so easy and helpful.

[@PhillipSkraba]

You're welcome, that's great to hear! I'm super happy I could help!

[@theavenue7studios]

Thank you for this, the best video that explains it well!

[@PhillipSkraba]

You're very welcome!

[@DDDebora33]

Thanks man! First gimbal and you totally helps!

[@PhillipSkraba]

You're welcome, happy it helped!

[@AndreasHorzella]

Best DJI RS2 Balance Tutorial! Thanks a lot!!!

[@PhillipSkraba]

You're welcome Andreas!

[@LetsEditUK]

Thank you so much, found this so easy to follow. Thank you.

[@PhillipSkraba]

Glad it was helpful! Thanks!

[@hawkeyehelivideo527]

GREAT video Phillip! Thanks!

[@PhillipSkraba]

Thank You!

[@tabletennisforfans7868]

Just bought this one and was struggling) thx! Subscribed

[@PhillipSkraba]

You're welcome! Have fun with it, it's an amazing tool!

[@yogi.photos5494]

to the point and efficient :) THANK YOU

[@PhillipSkraba]

Thank You!

[@mohamadawad3175]

You fixed my issue 👏🏼, man I don’t know how to thank you

[@PhillipSkraba]

You're welcome! Happy it's working 👌🏻

[@geoffschatzel6998]

Thank you. Worked perfectly.

[@PhillipSkraba]

Fantastic, have fun with it!

[@MooRa4x4]

Thanks bro, it’s really useful for me 👍✌️

[@PhillipSkraba]

You're welcome!

[@skyworksaerialmedia4036]

Thank you Brother! I was struggling with shaky footage on the new Canon C70 and my Pan axis was way off. No more thanks to you! Cheers Mate.

[@PhillipSkraba]

You're welcome!

[@gloprasanna2922]

for me same problem pan axis problem but gimbal balace is good but idont konw why foorage is sakey i am using canon 90d

[@batman23kiel]

Super help full I appreciate it!

[@PhillipSkraba]

You're welcome!

[@bonieboy]

Bravo for explanation... have look so many of those videos and they suck badly... this is the first one I actually get it

[@PhillipSkraba]

Thank You! I'm glad it came in handy!

[@boop41]

Really helpful quick video thanks

[@PhillipSkraba]

You're welcome!

[@wpkambiancesounds]

Thank you so much, great tutorial.

[@PhillipSkraba]

You're welcome!

[@greggoryburt7919]

Great video! Definitely better than DJI’s instructions.

[@PhillipSkraba]

Thank You!

[@ShotByDoyan]

Very awesome video! Thank you

[@PhillipSkraba]

Thanks! Glad you likes it Doyan.

[@soflafit]

Best video hands down

[@PhillipSkraba]

Thank You!

[@amandahibbertph]

Excellent! perfectly described and succinct - I dropped you a subscribe and like thank you!

[@MrEddieNunez]

Thanks! Subbed 👍👌

[@PhillipSkraba]

Welcome to the channel!

[@vinzsfar9308]

Thank you for this guide

[@PhillipSkraba]

You’re welcome!

[@kamerdemirfilms]

clean ✊

[@PhillipSkraba]

Thanks!

[@cuzthatshoweyroll]

This was actually helpful. Thank you. I still feel like a caveman who's just discovered fire using this contraption, but I'm sure with some time I'll feel like a caveman who's just discovered some kind of proto language!

[@hb5318]

YOUR THE BEST THANK YOU SO MUCH !!!! FINALLY EXCELLENT EXCELLENT EXCELLENT AFTER 5 HOURS LOL

[@PhillipSkraba]

You’re welcome haha!

[@marcosdelamonja2416]

great tutorial my friend!!

[@PhillipSkraba]

Thank You!

[@KostasLazanas]

Great video sir

[@PhillipSkraba]

Thank You Kostas!

[@RadianFilms64]

Nice and fast! :)

[@PhillipSkraba]

Super fast!

[@GrofdesignVideography]

Thanks for the video! Would you recommend always doing both the autotune and the test after switching lenses? I‘m using MFT lenses with a GH5 and the 3 lenses I use most are quite similar in weight and size. Would it damage the gimbal if I don‘t have the time to always fully calibrate it?

[@PhillipSkraba]

I always do the autotune and test, it's pretty fast and gives me peace of mind, as well as letting the motors control the payload better. If you don't have time and the gimbal is working fine, then that's okay. If however it goes to sleep that basically means the motors are under strain, nothing bad will happen, the gimbal will just go to sleep.

[@BruceLeroyUK]

Thanks Phillip.

[@PhillipSkraba]

Mr T, anytime!

[@kgxvisuals]

Thanks man!! This is my first gimbal, I did not balance it correctly in the first case and got shaky footage continously and I thought I had bought a machine that doesn't work. But after your video I'm in love with it again!! Thanks

[@PhillipSkraba]

Yes, balance is very important, every time. You’re welcome, glad it helped!

[@SILBERTOR]

This is the best demonstration of DJI RS2 gimbal balancing ever on youtube. (everyone forgets the second balancing step) Please also explain the operation from 4:08 onwards. Do all DJI RS2's work on the app? And I see that at 4:08 sec. you move it with the back button. Does this apply to all DJI RS2 gimbals or is there some kind of accessory, cable, connection required? How to connect to dji rsc2? Wifi? I have never seen this connection to the phone app on and fine tuning on the app. isn't it enough just fine tuning on the gimbal itself without the phone?

[@AcikZami]

thanks Phillip, u help me out , simple and awesome.. ^_^

[@PhillipSkraba]

You're welcome!

[@AcikZami]

@@PhillipSkraba done subscribed.. ^_~

[@PhillipSkraba]

Good to have you on board 🤟🏻

[@mychanneltoletyouknow]

thank you!!

[@PhillipSkraba]

You’re welcome!

[@celaldoor]

thx a lot man.

[@PhillipSkraba]

You’re welcome!

[@robertovazquez2219]

if everyone made videos like you where they just cut to the chase, I'd save so much time. THANK U

[@PhillipSkraba]

You're welcome Roberto, glad you liked it!

[@vadimaynbinder6346]

THANK YOU!!!!

[@PhillipSkraba]

You're welcome!

[@woohooo1907]

Thank s lot of

[@mrstephenwells]

Thanks so much! Have you found a good solution for mounting/quick release plates? The plates that came with the RS2 don't fit my manfrotto tripods, what would you recommend?

[@PhillipSkraba]

You’re welcome! It’s funny, most of us use Manfrotto plates and they go with Arca Swiss 🤦🏻‍♂️ I’m about to start dropping more videos on the RS 2 so I’ll be testing out various options 👌🏻

[@Marco-zp7nb]

Hi Phillip, Great video once more! I connect the battery grip to the gimble. There is a click mechanism. it wobbles a bit at that point. with you, too? Thanks Marco

[@PhillipSkraba]

Thanks Marco! Yes, when I put it in the first time I was worried! So click it in as usual, and pull the level nice and tight, it doesn't go all the way, just pull it with your finger until it won't go anymore, then the battery grip shouldn't wobble anymore! Let me know if it's okay.

[@alajuwon23]

Thank you bro

[@PhillipSkraba]

Happy to help!

[@miketelan5527]

Hi - I can't seem to calibrate it. I am getting the "Calibration failed. Pan axis is locked." error. But I did checked and the pan axis is unlocked. What am I missing?

[@shabeehaider7459]

love it

[@PhillipSkraba]

Thank You!

[@JaredRibic]

Thanks for this video, my RS 2 arrives this weekend and I can't wait. I gotta ask, what was going on with the audio?

[@PhillipSkraba]

You're welcome! You will love it, it's an excellent tool! haha, that was me just being silly, added a fireplace effect to go with the crackling warm Aputure light 😂🙈

[@jimmykrutakofficial294]

Legend

[@PhillipSkraba]

Thank You!

[@PaketGo]

So Appreciate

[@PhillipSkraba]

You're welcome!

[@richardmunger9902]

Hey Phil, thanks for the video very informative, have a question, I noticed that on your Sony you have an arca swiss type cage. I have a sunway foto cage on my rig and it will not mount up to the DJI plate (to shallow). If you dont mind, could you let me know what brand cage you are using? Thanks Rick

[@PhillipSkraba]

Hi Richard, I'm using an 8Sinn cage, I've made a couple of videos about their cages, it's a Polish company. In my opinion they make some of the most beautiful cages in the world.

[@Alijaber7]

Thanks

[@PhillipSkraba]

You’re welcome!

[@muhannadali3030]

Thx

[@carinedebrabandere587]

I liked your video very much. Thanks. But i have some problems to balance my camcorder sony fdr ax 100. allthough it is compatible . In the manual they say due the special design of the camera , i have to put it upside down so that the camera faces the roll motor. I don't understand that very well. I wonder if you can help me?

[@PhillipSkraba]

Really?? That sounds very odd, it looks like it would be fine balanced like every other camera. Have you tried balancing it like I do in this video? It should in theory work just fine this way.

[@fallingscalesmedia]

That Tilta Tool is AWESOME. So useful. But where in the world can I buy it? Searched everywhere including the Tilta website, nothing... :( And also, fantastic vid. Truly helped me balance the RS 2.

[@PhillipSkraba]

Thank You, glad I could help out! I bought the Tilta tool from Aliexpress as I couldn't find it either, it took 3 weeks but well worth it, excellent tool!

[@OllyJelleyWildlife]

Wicked video dude, I can get all the axis great, BUT I cannot get my roll to 'stay' when I move it whilst balancing. The camera is balanced perfectly on the tilt, and the roll it sits completely happily 'flat', but if I move it to one side or the other, it rotates back to that lower position. Any ideas? Is it counterweight time or something?

[@PhillipSkraba]

It's no doubt the most difficult one to balance, with my setup, Sony A73 series cameras and those big GM lenses I have it almost pulled all the way out, right there, I find that's the sweet spot for me. It's a hard nut to crack when balancing sometimes, but when you get it right and it doesn't move it's worth getting a cool beer ready to celebrate! What setup are you using? As you can see at 3:25 I have it at around 0.3 more or less.

[@zeyneltasdelenphotography]

thank you

[@PhillipSkraba]

You're welcome!

[@ancientfuture1030]

I just got the rs2 and having a hard time balancing even after watching your awesome video.. pleasse help

[@duncan.scobie]

Rs2 just arrived....if using a telephoto lens do you have to recalibrate every time you change the focal length also when adding extras like raven eye.

[@PhillipSkraba]

Yes, I would. Otherwise the motors could be under or over powered which would lead the RS 2 to go into sleep mode. It only takes a minute and it'll give you peace of mind when filming.

[@deanhenthorn8674]

So I went through the steps to balance it. It all looks good. I went through the APP and after the balance test - which said all is excellent. the camera now leans to the left about 15degrees. and doesn't come back to level when moving it around. Any suggestions.?

[@agarwalamit662]

Best explanation.. saw lot of videos but this was most helpful.. can you make some more videos on how to use rs2 and focus videos using rs2 without using focus motor 😃

[@PhillipSkraba]

Thank You! Yes, I'm preparing to get a lot more of these out, and I have a load of accessories from SmallRig so I'll get a video about those too.

[@agarwalamit662]

@@PhillipSkraba I am facing a lot of issues in managing focus in videos while panning using gimbal .. can you also prepare a tutorial on how to manage focus in videos shooting using gimbals … and what are the best auto focus settings in video

[@PhillipSkraba]

Sure! That's a video I have in mind too, focus. I'll be working on that one soon.

[@SabrinaMorris]

These are enormously helpful videos. Subscribed. I just wish you shot on Canon instead of Sony.

[@PhillipSkraba]

Thank You Sabrina! haha, well, I invested heavily into Sony after ditching Nikon a few years ago, but right now, I feel that all the cameras are more or less on the same level, it's us - the creators, that make the difference now.

[@bollingerpro]

Can you lock the one of axis’s when the gimbal is on? I want to lock the pan axis for when the RS2 is on my steadycam rig.

[@PhillipSkraba]

Sure! You have different modes you can use, lock an axis, which will help when you want to keep things straight.

[@andrewp1390]

so much easier than working through DJIs manual - thank you

[@PhillipSkraba]

DJI has great products, but yes their manuals need work.

[@andrewp1390]

following your video carefully I got things balanced first time after many abortive moments @@PhillipSkraba

[@wanderbread4217]

DJI Ronin RS2 has violent snaps when all axis become aligned odd movements and vibrates uncontrollably then puts the motors in sleep mode. Ive tried Balancing and motor settings but no matter what i do it all seems out of wack. I also tried resetting all settings but nothing has worked so far. Every time i calibrate it just vibrates and makes popping noises. when i manually control motors of all axis's it all works smooth and fine. Please HELP!!

[@bulldoggee1237]

I have a canon eos r with the control ring adapter with a sigma 18-35 lens. I have a difficult time trying to balance it, do you have any advice?

[@PhillipSkraba]

Seriously front heavy? I have the same with this setup, if you pull the camera pretty far back on the rails it should be okay as a start point and then go through my points here.

[@samcarmel6975]

What tripod are you using with the gimbal? I think I may want to set mine up like that for real estate photography/video

[@PhillipSkraba]

I'm using the Manfrotto 055XPROB + 808RC4, had it for around 10 years, best photo tripod I've ever had!

[@carinedebrabandere587]

Yes i tried it out like in your video but it doesn’t work in the tiltmode horizontilly. All the other axes it’s ok. Thank you very much .

[@PhillipSkraba]

Keep on balancing until it's perfect and it should work in both orientations. You're welcome!

[@paulb3488]

I have a Sony A7Siii on the RS2. I also use a Rode external mic on mounted to the top of the camera. After having it perfectly balance, when I turn on the gimbal the upper right logo turns orange and tells me there is a problem with the tilt access. Do you know anyone who has been able to get the RS2 to work with the Rode on top of the camera? It used to work fine on my Pilot Fly gimbal.

[@ifilm6746]

please also make a video on different modes and tips

[@PhillipSkraba]

I’ll have a think about it, sure!

[@Holyeddybear]

I was using zhiyun crane plus for 3 years, I couldn’t use my sigma 18-35 because it is so heavy for camera..my rsc2 just came now and my goodness.. it’s like 10x upgrade.. so easy to use and pack

[@PhillipSkraba]

I tried the Crane a couple of times, yes, the RS2 and RSC2 are just monsters, love them to bits!

[@dannybanks7362]

How can I download the app, and what's the name of the app used for the guide, please?

[@fee1687]

Great Tutorial! Although The Balance test part of the app doesn't let me "Begin Test" it only lets me watch tutorials... any idea how to fix this?

[@fee1687]

i own the dji rs3

[@MegaFargan]

Hey Phillip, can you post a link for the screwdriver plz? Great job on the video.

[@PhillipSkraba]

Hi Arthur, it's funny, it's hard to pick it up. You can easily get it on Aliexpress though, do a search for Tilta screwdriver and it'll pop up in a variety of colours. That's where I got mine. Thank You!

[@SarahNaqvi]

Hey kindly help me out I got it my RS2 weeks ago but my 1 dx mark 2 is not balancing on it with 24-70 2.8 ? My Q is does anyone did balance it on 1 dx mark 2 waiting for your prompt reply thank you

[@PhillipSkraba]

That should be no problem, we've balanced it with cinema cameras, so the Canon should be simple. If you need, you can buy counter balance weights for it if you're having a hard time.

[@LWT633]

I can't get this balance for the life of me.. you know if you put a different plate like the vertical shooting plate it would be different to balance?

[@Baguenault]

My god I was doing it wrong for years! Thx!!!

[@PhillipSkraba]

haha, you're welcome!

[@ishanagarwalphotography]

I am a new user do we have to turn off images stabiliser of the lens? since I am using gimbal or does the IS on give double surety

[@PhillipSkraba]

I'll be honest with you, I never do, so I'm sure you'll be fine if you don't.

[@ruffimusic8457]

Nice video dude 👍 👌....what's the name or link to that tripod that works with rs2?

[@PhillipSkraba]

The one I use is the Manfrotto 055xprob, well, a slightly older version with a better head than the new one, you might be able to still pick it up somewhere. It's a tripod I bought when I lived in LA 10 years ago, and it's still like new today.

[@skrowe]

how did you balance it off at 15 degrees did you use your legs to support it?

[@PhillipSkraba]

I had it on a tripod with a ballhead, easiest way. However, when I don't have that I just use books or whatever I have to get it done.

[@aaronsandler9534]

how do you do the test without the phone app? I can't find it in the onboard menu?

[@PhillipSkraba]

Top right button should be calibration, once you've done that you should be able to see all axis and they will show you if you're in the green (at 0) or if you're stressing the motors.

[@vigneshkumar6122]

hii sir, this is very very useful, and after balancing my gimbal is switch on the camera a7r4 is some USB problem, check the connection error, I am going to change the all settings in USB menu settings, how can I solve this problem

[@PhillipSkraba]

Thanks! Check the compatibility list and see what cable you need to be using, that's usually the usb problem.

[@gru860]

please explain app parameters settings

[@rrogers2370]

dude my tilt axis will not move. how is yours moving so smoothly?

[@LalondeFilms]

I followed all the instructions and did the motor parameters auto tune and balance test that came out excellent but it sways left to right after I stop moving.

[@PhillipSkraba]

Have you updated it, mine did that the first time I turned it on, updates have done a lot since then though.

[@LalondeFilms]

@@PhillipSkraba Yeah I did update it. Try calibrating it horizontal and vertical and went to user control and saw CH3 was 0 which another person on forum said if not 0 would be issue.

[@Presacj]

What you do if you have to change you zoom in the lens? Rebalance?

[@PhillipSkraba]

I usually set it in the middle of the zoom, balance, and then wherever you zoom should be fine 👌🏻

[@JohnstonNyarega]

Could you balance a c100 mark ii on the RS2?

[@PhillipSkraba]

I've seen it done, how secure and well that works I'm not sure though. I use the Sony a7 series cameras on it, so much much lighter.

[@The_Daliban]

Really great Tutorial. Quick question. I have a Canon EOS R and a cage for it. It fits with the cage on the RS2 but the roll axis is of to the left and right. It tilts to the left and to the right. Any recommendations?

[@PhillipSkraba]

That is odd, so what does the test say?

[@The_Daliban]

@@PhillipSkraba didn’t test it yet. I took the cage off and it worked. Gonna try again tomorrow. Was the first time setting it up for me. Maybe i was too impatient. Thanks for the reply, and the tutorial🙏🏻

[@PhillipSkraba]

Be patient, no rush. I usually shoot with a cage on, it should be fine.

[@The_Daliban]

@@PhillipSkraba cheers man🙏🏻I’ll make it work

[@The_Daliban]

@@PhillipSkraba tried again and it worked🎉cheers mate🙏🏻

[@tigerbeatfilms2943]

Mine dies when I try tilt up any idea why? I’ve tried stiffening the tilt but nothing seems to be working :(

[@PhillipSkraba]

Really?? Is it all perfectly balanced? Is the lock off?? I've been caught out by that a few times 😂 Maybe the camera is too far forward or backwards on the tilt axis.

[@Marco-zp7nb]

Hi Phillip, do you set your rs2 in a smooth cinematic mode? Imo the movement of the gimbal is way to fast. If yes, what dou you recommend. Your tip about the wooble works. Thanks a lot.

[@PhillipSkraba]

Well, if you set everything on slow on the actual Ronin screen on the gimbal you instantly slow down the movements. I'm still playing with settings to get everything feeling just right, but as soon as I dial them in, I'll drop a video for you guys.

[@Marco-zp7nb]

@@PhillipSkraba thanks for doing so good video stuff! Greetings from germany.

[@PhillipSkraba]

@@Marco-zp7nb Thank You, greetings from your neighbour Poland.

[@ag2810]

Smooth cinematic is intended for heavy camera gear as it kicks the motors into overdrive to stabilize. If you’re not pushing weight I think it’s not needed.