How to blend paint and clear coat your car

In this episode! We overcome a common painting problem. I'll share how to spray a base coat clear coat finish with amazing results. How to set up your paint gun and help you understand how air pressure, fluid volume your speed, and spraying distance work together to produce the best results. This video will certainly help you with your repair or restoration project.
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
R500 1.3/1.4/1.8 needle set
lvlp small compressor paint gun amzn.to/3zoVS3B
universal paint stand
amzn.to/40Sx9QZ
upol clearcoat
amzn.to/3XhGtgj
sprayIQ Disposable mixing cup compatible with 1.0 system
amzn.to/3hHCwkA
aeropro a610/R500
www.amazon.com/dp/B0BMNWDL3X/...
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: [e-mail]
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[@JohnWD40TC02]

Very helpful video Chris I like the fact that you include the bad along with the good, some painters don't show the bad where they get runs or reactions in their finishes but you show it how it is plus you also explain how to fix or work around them. I mostly use sealer before basecoat but even then my first coat of base is always a light dust coat as this reduces the chance of having problems🙏👍John UK

[@GarageNoise]

Appreciate the comment and support brother!

[@richardjeun]

Hey Chris, you helped me a lot on some of my questions so I want to help you reduce spillage when pouring your reducer out of the bottle. I’m not sure if you know this, because you could have been in a rush when shooting a video, but next time you pour that reducer, try pouring it from the other direction. In other words, spin the container around 180 degrees before you grab it and start tilting it to pour. I do this method for engine oils too and it never makes a mess. If you pour it the way most people think is the correct way, the fluid coming out always catches the corner rim of the container, causing the fluid to run down the side of the container.

[@GarageNoise]

Good tip!

[@frankmaceyka4895]

Great information. I’m doing basically the same repair with the same fisheye issue. I’m going to re wash with the isopropyl a few times and go at it again using your tips.

[@GarageNoise]

If you start with a light coat it really helps with clear as well. Appreciate the comment and support!

[@Here-2-Learn]

Id like to see it all buffed out. It looks like you’re looking right at where it’s hitting I know it takes a little bit of time to learn the timing so you don’t get sags or runs. I’m going to have to watch some of your other videos where you do larger pieces or the whole car. I don’t paint cars I’ve only probably painted about five in my life but I have always wanted to paint houses and cabinets doors whatever I love to spray. it’s funny the different types of spraying houses use an airless most of the time Cabinets I use the HVLP or pot sprayer which is similar to what you’re doing. I’d love to get into automotive painting I think it’s something I would enjoy I’ve only done auto body when I was younger . You do a great job everything looks really good I enjoy your videos

[@okde1875]

Thanks again for another great video I usually watch your videos over and over again.

[@GarageNoise]

Thank you appreciate that!

[@Alaska_Engineer]

Love the videos! Been a hobby restorer since the 80’s and you’re really helping me up my game! …. A hearty THANK YOU!

[@GarageNoise]

Awesome! Love to hear it. This is my mission. Appreciate your comment and support!

[@Enjoytheinbetween]

You make it look easy

[@GarageNoise]

👍

[@wayneodonnell8847]

Thanks Chris … the best video’s on the tube with a heap of tips 👍

[@GarageNoise]

Appreciate that! Thank's for the support!

[@anharahmedlife]

Another excellent video

[@GarageNoise]

I appreciate that

[@anonintellect9882]

Thank you!

[@dannyolsson4085]

Thanks for your videos iam learning alot

[@GarageNoise]

Awesome! Good to hear! Appreciate the support!

[@henrypeterson1981]

Great Explanations

[@GarageNoise]

👍

[@bendafixer4542]

So satisfying to watch your videos. I just painted a fiberglass hardtop and discovered the role static plays while painting 😢

[@GarageNoise]

I may have a cost effective fix for that coming soon. Thank's for watching and supporting the channel!

[@GarageNoise]

I may have a cost effective fix for that coming soon. Thank's for watching and supporting the channel!

[@GarageNoise]

I may have a cost effective fix for that coming soon. Thank's for watching and supporting the channel!

[@sheerwillsurvival2064]

Just what I needed 👍🏻👊🏻

[@GarageNoise]

Awesome! Appreciate the comment and support!

[@cadenadefuerza]

Thank you so much !

[@GarageNoise]

Yw! 👍

[@troyadams1076]

Great one add to my resoucres

[@GarageNoise]

👍

[@sajidmahmood3668]

You are the best 👌

[@GarageNoise]

👍

[@davidharrison8397]

Nice job brother..... turned out nice 👍

[@GarageNoise]

Thank's bud! Appreciate your comment and support!

[@sajidmahmood3668]

Best job

[@GarageNoise]

👍👊

[@joanwilliams3221]

Another great job there boss …

[@GarageNoise]

👍🙏

[@setthehook4me]

Thanks Chris

[@GarageNoise]

👍

[@clemp3010]

Looking for a first gun for home use. I have a 60gal 5hp 12.5cfm. I have watched your vids on the Astro tool EVOT13 and the Aero pro R500/A610. I have never painted a vehicle before and am replacing a door and bumper cover. I am learning as much as I can so the only mistakes I hope to make is just being a new painter vs equipment issues. Thanks for all the instruction and help!

[@GarageNoise]

Awesome! With your compressor your not limited to a low cfm gun. I will be breaking out the astro euro pro he here real soon so keep an eye out for that video.

[@clemp3010]

@@GarageNoise Thanks, I appreciate it.

[@octanegarage3729]

Great video

[@GarageNoise]

👍

[@DaytonRodriguez-hr1iy]

Just trying to help you out a little bit but they do sell a fisheye product for the clear all you have to do is mix it normal and and put the same cup that you open the product with and use it as a guide fill it up all the way in pour it in the clear and makes it real good ... You're welcome

[@GarageNoise]

👍fisheye eliminator

[@impalaman4546]

Nice 👍

[@GarageNoise]

👍

[@eareeyesee3290]

Good videos, good knowledge, good edits. Can you explain why some basecoats get blended into a wet bed or get the diluted color blender technique but this time you used a backed-off dry dusting blend. I dont do a lot of painting but rather enjoy it when I do so just like taking in knowledge. Thank you!

[@GarageNoise]

It's really all about avoiding something called mottling. Which is an inconsistency in the metallics of a finish. It makes metallics look blotchy. This happens most often in light metallics like golds, silvers. This is when I will definitely use a color blender or (wet bed). Especially if it a hot day as this makes those silvers dry quicker, which also make the chance of mottling greater. Most dark colors I don't need a color blender. That doesn't mean there's no chance of mottling but for me it alot less likely. Good question, I've been getting ask this alot so I may answer your question in a video. Appreciate the support!

[@craigcarter5276]

How do you get the metallic to show on the rest of the fender that you didn't shoot?

[@bandidomxgarage7898]

Wondering where your shop at great videos gracias

[@GarageNoise]

You near Tulsa Oklahoma?

[@dodoskiherrera7671]

Another great vid! Thank you! May I ask what psi for same gun for basecoat and clear using an 8 gal with 4 cfm at 90 psi air compressor? Thank you.

[@GarageNoise]

24psi for base, 30 for clear

[@serviceproper]

Thanks for the video it was very helpful. I'm trying to fix a small dent on my harley rear fender. So once I fix the dent and prime it, I'll sand the whole entire rear fender with 600 including the spot so that when I paint and clearcoat everything will be filled in like in the video?

[@GarageNoise]

You got it! You may need to block the primer over the repair with 320 to make sure its straight. Then finish sand with 600

[@bigrustybucket]

Another great video. Is there any chance that silicone will show up sometime in the future? Or once it's covered it's covered?

[@GarageNoise]

No, it just cause the reaction. Once you have it painted and cleared your golden.

[@richardjeun]

Also, doesn’t isopropyl alcohol contain some water, which then can penetrate into the urethane primer? I use denatured alcohol (I don’t know if this is better).

[@GarageNoise]

Denatured alcohol includes additives sometimes (castor oil) to give it taste for saftey reasons. Isopropyl alcohol is pure alcohol no water.

[@azzyzz5214]

Great work. Just a question what nozzle do you use for bass coat and clear coat ? Thanks

[@GarageNoise]

1.3 for both base and clear with this gun.

[@davegallinger7431]

Great videos!!. How would you blend paint and clear up to a body style line? I guess the question is: how do you end base and clear at the body style line and then wet sand? Wouldn't there be a suttle line as the paint and clear end at the same point?

[@GarageNoise]

Yes ,there would be a subtle line. I'll make some video's explaining how to do a repair like this effectively. It's never the right way to do it but for a diyer it a useful skill.

[@davegallinger7431]

@@GarageNoise That would be great. Thank you so much!!

[@spencerbackhaus2000]

I do a lot of painting all the time here in California. We used to be able to use what was called Naked Gun to clean our guns now we can only get acetone to clean the guns I'd like to know what you do for cleaning your guns?

[@GarageNoise]

I use thinner

[@drogba2k10]

When you say dust it on the first coat should i drop pressure from 2 bar or just half trigger?

[@GarageNoise]

Just increase your distance a bit 1-2 inches and you don't have to mess with your settings. You can change the settings if you choose.

[@jhenson5168]

Any clear base or blending agent used for the basecoat?

[@GarageNoise]

No sir

[@Cornelldsc]

I could buy a small compressor and a gun like you suggest or the Eastwood five stage turbine. I don’t paint often but I have pride. What do you recommend? Time to leave rattle cans for smaller projects.

[@GarageNoise]

If your concerned about overspray, air consumption, and want to save in materials this is a great paint gun. As far as an air compressor I always suggest buying the most cfm's possible within your budget. Size doesn't matter, how much air it produces (cubic feet per minute) is what's important. Hope this helps appreciate the support!

[@Cornelldsc]

@@GarageNoise thanks a bunch. I love your channel. My friends don’t understand how fun it is to DIY even if one can afford to have a pro do it. My results are much worse but the quest is worth everything to me.

[@sheerwillsurvival2064]

I Am getting that gun for my next job . And only $75 👊🏻🙂

[@GarageNoise]

I love it and I've used a lot of different guns.

[@GarageNoise]

@@sheerwillsurvival2064 🤣🤣🤣something..everything... the world! Lol

[@gilbertsanchez9953]

I have a question buddy can you paint a whole truck with that gun

[@GarageNoise]

Absolutely, it may be just a bit slower if you like to spray fast. It doesn't bother me though. I like the lower overspray and material savings.

[@joelblauvelt5062]

I have a question that's been puzzling me for a long time. After you spray your base, you tack down the scuffed original clear coat area which now has loose, dry overspray on it. Then you're clearcoating over some dry base atop old clear, yes? is that OK??? Thank you!!

[@GarageNoise]

Yes, because it's just the color the clear will smooth everything out and give it the gloss

[@drazendean1025]

Where can i get a spray gun from like that ?

[@GarageNoise]

Here's the link brother! amzn.to/3VF8kqk

[@ccas1318]

why did you go back and sprayed more base? fish eyes?

[@GarageNoise]

Yes

[@ccas1318]

@@GarageNoise Bummer.. turned out great though

[@charlesranscheart6738]

Hey man hey man what's emu video so tired of watching the same ones

[@GarageNoise]

🤔?