How to build a Brick Pizza Oven / Outdoor Kitchen Build / Part 6: How to Build the Landing

In this segment of the pizza oven build, I will show you how I build the landing for my pizza oven. I will also show you how to build a brick arch for wood storage, and a decorative arch for the Pizza oven face. I also build a chimney in preparation for a stainless steel flue.
Link To My Cooking Channel: On The Flame: / @on-the-flame
My Website: www.artisanmadethings.com/
Follow: / artisanmadethings
Links to the other parts of this build:
Full Playlist: • Brick Oven/BBQ: Outdoo...
Part 1: Building the base (This is my first video ever so go easy on me) • Brick Oven/BBQ Outdoor...
Part 2: Building the form (This is my second video ever. Slightly better that the first) • How to build a brick o...
Part 3: Insulating the oven floor • How to build a brick o...
Part 4: Installing the floor • How to build a brick o...
Part 5: Building the Dome • How to build a brick o...
Part 6: Building the Landing, Arches and Chimney • How to build a Brick P...
Part 7: Curing Fires • How to build a brick p...
Part 8: Insulating and Rendering the brick oven • How to build a brick o...
Part 9: How to build a wood fired BBQ: • How to build a Wood Fi...
Part 10: Kitchen Counters: • How to Build Outdoor K...
Part 11: How to Frame A Roof For An Outdoor Kitchen: • How To Frame A Roof Fo...
Part 12: Installing the chimney for an outdoor kitchen: • Installing The Chimney...
Part 13: How to build a Brick Arch • How to Build a Brick A...
Part 14: Installing Stone Veneer Over Cinderblock • Installing Stone Venee...
Part 15: Outdoor Kitchen is Finished • Building An Outdoor Ki...
How to Make the Indispensable Tool: • How to Make the Indisp...
Frequently Asked Questions About My Brick Pizza Oven: • Frequently Asked Quest...
Avoid My Mistakes: • Avoiding Mistakes Buil...

[@robertjevans437]

Fantastic pizza oven. Great work.

[@adrianbrave6044]

One of the best looking I've seen in my KZbin browsing

[@timbuckii8504]

Great work! God Bless.

[@anon0054]

Beautiful work!

[@tiendaforense]

beautiful work

[@majidmessaoudi4860]

You are a professional great work 👍

[@rallymax2]

It’s look great!

[@nikkithuillier5519]

Thank you so much for this awesome tutorial, I'm going to try to build my own over this lockdown.

[@mohamednabulsi3533]

Man you are great Must be a master mason

[@MoGhotbi]

So impressive.

[@JonneytheKidd]

Just an astounding craftsmanship.

[@wadecaldwell7210]

My man, this is the coolest part tutorial for making a pizza oven I’ve ever seen. I don’t feel like I could do it but you make me feel like I could I’m still not gonna try but I like watching it.

[@ArtisanMade]

Lol. The magic of video editing. That was the most difficult project I ever built.

[@larsdef9263]

Super explanation!

[@derda6773]

Nice Work. Gratulations from Germany !!

[@giuseppebernardi7775]

Bravo!

[@robertoesposito9081]

BRAVISSIMOOOOO!!!

[@andraetkula6044]

Amazing Work......You're a Legend.......very detailed explanations.....THANKYOU!

[@joemccarthy9990]

Class act well done

[@ArtisanMade]

Thank You!

[@chriscarter3866]

I really enjoyed watching this series of your outdoor build. Very informative. Thank you (from The UK). Looking forward to more inspiration and help. Cheers.

[@ArtisanMade]

Thank you!!! Stay healthy and safe friend.

[@eduardogarcia2480]

@@ArtisanMade "Haré todo lo posible para que nadie pueda hacer su horno de ladrillos" Artisan

[@robvangemert2737]

Really enjoying these videos. A bit of trial and error here and there. End result is amazing. Excellent build.

[@ArtisanMade]

Thank you!!!

[@silviolosardo2695]

I need a pizza oven like this in the back of my house

[@muzzykolip]

Wow absolutely amazing build. One of the best I have seen on KZbin 👍. I have definitely just subscribed

[@ArtisanMade]

Thank you!!!

[@ronron24]

תודה

[@vladislavlipus645]

Thanky you for your ideas, it helps me a lot. Greetings from Czech Republic

[@ArtisanMade]

Hello! Thank you!

[@normanrhone2791]

I would very much like to see the build for a brick barbecue grill. Thanks.

[@HigginsHaunt]

Great series, with a question. When you initially cut your fire brick in half why didn’t you just cut the brick in half at the angle you needed and flip one over for the circle? What am I missing??

[@vondarkmoor1]

Amazing work. great video. looking forward to seeing more.

[@ArtisanMade]

Thank you!!!

[@lornehutton7229]

AWESOME JOB, I MIGHT HAVE TO TRY ONE AFTER I TRY BUILDING SOMETHING SMALLER SO HOPEFULLY I DON'T SCREW THE PIZZA OVEN UP. DO YOU HAVE A MATERIALS LIST , ESPECIALLY ON THE BRICK COUNT ?

[@razafromdk]

its every mans dream to have these skilles

[@ArtisanMade]

Thank you!!!

[@crassizolda9935]

Очень тщательная и добротная работа. Благодарю за возможность увидеть прекрасный образец методичного подхода к строительству печи.

[@ArtisanMade]

Thank you for the kind words!

[@dirkjan9196]

Heel mooi

[@shotakvachantiradze5567]

Hello. Great job and nice result 👍 good luck, your oven is just perfecto 🤌 and thanks for your videos. I’ve two questions, (answers didn’t find in videos or on your website). 1) what did you use for dome - fire clay or refractory cement? 2) what proportion was cement and sand for the rendering mortar? And cement was ordinary cement, not fire clay, am I right? Thanks and God bless you !

[@ArtisanMade]

Thank you! 1) Refractory 2) Type S mortar premixed in a bag

[@thomasfusco2297]

I am looking to build something very similar, on your website you stated that it was 250 bricks to build the dome... do those 250 bricks also include the floor of the oven? (The layer of bricks you put over the vermiculite). Thanks for the tons of information I got from your videos!

[@ArtisanMade]

I used about 250 firebricks for the floor, dome and chimney.

[@RicardoFerreira-ez8tp]

what kind of cement do you use to lay the bricks

[@eduardogarcia2480]

"Haré todo lo posible para que nadie pueda hacer su horno de ladrillos" Artisan

[@azanazam5644]

Hi dear plz help me I want to built indoor wood stove for kitchen with oven,but can't find material like doors ,hot.Could you plz help me where I can find ?

[@tomhostetter8516]

I wish i had mason skills... just to fix my woodshop floor... why is it heavy equals $$$ lol... so once your finished will you have to thermo cycle the oven to make sure the mortar is fully hardened?

[@ArtisanMade]

I need to do a series of curing fires. Each one getting progressively hotter. Hopefully I can fire it up fior the first time this weekend.

[@notsosure7757]

I've watched quite a lot of these "how to make a pizza oven" videos now. I've got too say this is the first time I've actually thought this might be pushing my skill level a bit too much lol. This is easily the best one I've seen, you've got some seriously genuine talent there. I don't suppose you could pop over to the UK and knock one of these up in my garden could you 😁

[@ArtisanMade]

Haha! I would love to go to the UK. I didn’t have much masonry experience either I practiced by doing some smaller projects before I got involved with this one. Good luck!!! Happy Holidays!!!

[@justtruth8310]

Great work!! But I noticed one thing I mentioned before. It looks like that if you use a door and use the door stop as designed here in the video you'll notice it looks like that if you close the door tight to the firebrick indentation the vent seems like it is outside the door/oven instead of on the inside of the oven venting the oven? Am I missing something here? I'd like to know because I am in part 3 of the build right now and I don't want to mess up. Thanks!

[@ArtisanMade]

The chimney is only one way. Smoke goes up. The door is used as a damper and to keep in retained heat.

[@rocobalboa1826]

Se va a agrietar falta la junta de dilatación .por lo demás muy bonito

[@jeremydavis869]

The only thing I'd have concern about is the transition to your chimney. I'd have recommended using the refractory cement for the firebrick used along the transition as the regular mortar will degrade over time from the products of combustion. Also, I didn't see you directly measure the opening for your chimney but the rectangular area appeared around 4"×8" and your chimney pipe looked to be about an 8" round. The area of Thales smaller rectangular opening would reduce the venting capacity and its more equivalent to a 6" round in area. I'm curious to know if this ended up drafting well in continued use or of you experienced any smoke staining on the facing of your oven.

[@ArtisanMade]

No problems with venting. I will be posting cooking videos soon.

[@leehudson3446]

Hi looks very good how many firebricks did you use in entire build and wits the Price of all the materials apart from the tiles you used at the end

[@ArtisanMade]

Used about 250 firebricks. Total cost around $2500-$3000. Not including the concrete slab

[@nedanother9382]

your oven has the appearance of being a little tall. What is the finished height and how do you feel about it now? these are really great videos. I think Im going to go mostly your way. Thanks

[@ArtisanMade]

Thank You! My oven is 3 inches too high. Originally I had planned on using 2 inch fiber board under the oven floor. I ended up changing the plan last second, and to get the same amount of insulation, I had to use 5 inches of vermiculite concrete. In my opinion, the perfect height for the oven is when you are holding the pizza peel flat on the oven floor and the arm holding it is bent at a perfect 90 degree angle. When you have to raise your elbow or shoulder to move your pizza, it is too high.

[@nedanother9382]

@@ArtisanMade Oh thats even more good info....I imagine its tough to keep track of all the little details when typically these things are done slowly over time. thanks again

[@9Vagabond9]

The build looks great! I noticed that the mortar on the chimney is darker than the dome mortar. Did you use another type?

[@mjaK42]

Great videos, what size bricks did you use for Dome, here in Australia I can get 2” and 3” thick, 9” long x 4 1/2” wide you cut these bricks in half for dome? Cheers Mike

[@ArtisanMade]

They were 2 inches thick 4 inches wide and 8 inches long

[@ronron24]

Why is everyone building a pizza oven in the shape of a dome why not in a square shape? Does it have a certain meaning or is it just beautiful

[@ArtisanMade]

Round ovens preform better thermally, but honestly, unless you are a restaurant, I think a vault style oven (rectangle) will cook well too, and it would be a lot easier to build

[@Nicola_Colonna]

minute 9:20 - after you glue the bricks, how long does it take to remove the wooden support

[@ArtisanMade]

A few hours and then clean the joints.

[@bernarddeham4787]

0:44 five rows of concrete blocks for your base, why that height? On forno bravo drawings they only take 4 rows...

[@hardyhandshake]

Good job but if you let your mud dry before tooling it won't have all the white stuff on the brick just fyi I worked for a brick Mason for a few years as a kid

[@ArtisanMade]

Thank you for the tip!

[@mikimaan]

How are you going to decorate the cinder blocks that are under the red brick arch?

[@ArtisanMade]

I’m going to use a stone veneer. Probably this spring if the weather cooperates

[@jcole2832]

Can I use clay bricks for the dome? Is it also good for the dome?

[@ArtisanMade]

You must use firebricks for the dome.

[@nikolajordanovski4532]

Hi, what size I chimney plate , you never end up using pipe for it anyway?

[@ArtisanMade]

8 inches

[@deathd3aler]

What zone are you in? Are these going to see well below freezing in the winter?

[@ArtisanMade]

Yes, it gets cold here in New York.

[@giuseppecosentino4852]

What size is the stainless steel collar for the chimney?

[@ArtisanMade]

Interior diameter is 8 inches. The make is Selkirk

[@giuseppecosentino4852]

Do you by chance have the part number for the adapter and pipe with the flue ? Also, how long is the pipe? Thanks for your help, much appreciated!!

[@ArtisanMade]

I don’t have the part number because I bought it locally. I haven’t installed the flue yet because I’m building a roof over it this summer. Will probably be using a 6 foot long flue. The longer it is the better it will pull your smoke upward

[@bernarddeham4787]

0:23 So in other words you messed up with your measures, am I right?

[@rocobalboa1826]

Hola

[@ArtisanMade]

Free Plans with measurements, materials, and additional information about my design on my website: www.artisanmadethings.com/brick-oven

[@fillempie1501]

What is the diameter of your chimney? 15 or 20 cm (7 or 9 inches...)

[@ArtisanMade]

Check the diagrams on my website. Links in the description

[@fillempie1501]

@@ArtisanMade Sorry I mean the diameter of the steel pipe. Not the dimension of the flue

[@jayjinx2591]

I was looking at dead tree as in half. Then I made concrete aquariums look like tree.. 😅

[@remobinternational]

Do you help to build for money?

[@ArtisanMade]

Sorry, I prefer to make movies.

[@davesmith5483]

I'm a mason

[@user-bv4zx6ln9m]

Plumb Bob? Why that's Sponge Bobs fruity cousin!

[@scrqqge]

Beautifull oven and very informative, but really, really who in their good state of mind would think this clown music is a good idea? Very irritating tune, which i had to listen to because i was interested in what you had to say! Liked the italian tine better

[@ronron24]

Why is everyone building a pizza oven in the shape of a dome why not in a square shape? Does it have a certain meaning or is it just beautiful

[@orvileknox3130]

Dome just looks so much better !

[@JuanRodriguez-cz1in]

It's all about thermodynamics!