How to Build a DIY Dynamic Microphone With Some Wire and a Magnet

This is a dynamic microphone build.

[@viveksaroj]

you did a great job. It's super simple to understand a microphone now. thanks, bro.

[@a_s_mikael]

You should use wires with a much smaller diameter (less than 0.1 mm) with a higher number of turns. And that instead of tape, you should use something that has a higher vibration subtlety, such as nylon freezer (before that, of course, the wires should be glued together. "Varnish is the same cosmetic that women apply to their nails, but the colorless type »)

[@frankPirate]

how to get better audio anyone?

[@ZonymaUnltd.]

This was super fun!

[@infinagon]

Anyone that wants to know, the high noise in the recording is the reason for having double copies of the recording and flipping one - The LR in XLR.

[@frankPirate]

how to get better audio anyone?

[@TheVirakahScale]

I think it has more to do with low signal volume. Boosting the gain is also boosting the Self-Noise, which is a lot because the signal is almost the same level of the noise floor. It would work better with a higher impedance coil, and more sensative 'Diaphram'

[@nolangutierrez9572]

This is awesome dude

[@evolvingevrday]

Why don't you put the magnet inside of the magnet coil? That way you can vibrate back and forth and sound a lot better

[@zinovyrozhestvensky3636]

theres also peizo electric crystals that work for making microphones and such

[@RosssRoyce]

Cutting edge steam tech 👍😆😛

[@caleb_erlandson322]

Thats awesome dude! Super cool idea

[@paulanthonybridge5741]

Thanks but no thanks, use a loudspeaker which this is a inferior copy of !!!

[@1islam1]

@@paulanthonybridge5741 ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

[@MillionaireMindset369]

Wow 🎉 amazing !

[@adnsmalltv2291]

Good idea

[@ZebastianMartinsson-xy5pr]

wheres the other microfone builds ? :(

[@PotatoGuyYT]

since its a speaker, would there not be power running through the circuit? If so then how is this a dynamic mic? Just askin, trying to buuild one for fun...

[@TUTOSANDROIDtutorialesymas]

A mic and a speaker are pretty much the same thing, however with the signal path reversed. While a microphone sends a signal to the computer, a speakers gets signal from the computer, keep in mind that I am oversimplifying this a little bit but yeah

[@PotatoGuyYT]

@@TUTOSANDROIDtutorialesymas thanks that cleared it up for me!

[@weebney]

super rad

[@moody634]

wouldn't you just be able us a regular speaker as a microphone then.

[@TheVirakahScale]

Technically yes, but Microphone capsules generally have a higher impedance, and are made of more 'sensative' materials. Speakers push a lot of air, and therefore take a alot of abuse and reguire thicker material for the 'Membrand/Cone'. THey do work as Microphones, but the tonal qualities are far different. Genrerally much darker/muffled from all my experiments. A Mic capsule is usually between 150-600ohms, and most common speakers are between 2-16ohm.

[@tindju]

cooll man

[@frankPirate]

how to get better audio anyone?

[@kevineddington2586]

And that's why I ain't hating cuz you're the ones got the video and have us know what's going on but you should have your s*** together bro you just kind of lose it in the middle taping your s*** all to hell lol

[@paulanthonybridge5741]

This is a copy of a normal loudspeaker, which should be a superior replacement for this Donald Duck version. Loudspeakers are very good microphones, but impedance should be transformed up.

[@attilarivera]

Lol

[@palashdas823]

can i have your email id?? i have a query

[@Hamzaalnahal_]

My guy your in the story camera does lie I'm studying you

[@kevineddington2586]

Bro I'm just saying this s*** barely picked up any audio I think dude in the comments below is Right thinner wire and more turns but idk I'm trin learn something off ur video and this be my 3 or 4th time watching.

[@genkidama7385]

man can u just normalize, and remove noise.

[@r-ratedstudios3847]

the chunky engineer