Рет қаралды 2,948
An in-depth video series for how to build a hydrofoil from home that actually works. There are several ways to build a hydrofoil, this is simply how I like to do it. - Free Hydrofoil plans here: flukeskitesurfing.com/hydrofo...
- Find Recommended Hydrofoil parts here: flukeskitesurfing.com/store/c...
- New videos posted daily @FlukesKitesurfing
This video: Today, we prepare the hydrofoil wings for the top lamination of fibreglass by first filling any holes and depressions. Specifically, we add a mix of epoxy resin and milled fibreglass powder to the trailing edge to make the surface of the wing flat before adding the fibreglass and Carbon lamination to the top of the wings. In this video we also add a mixed filler to the foil wings screw connection holes We mix up epoxt resin, milled fibreglass and chopped fibreglass to the foil wings screw connection holes. This filler will help strengthen, support and waterproof the holes we will later redrill for the screws to go through and connect to the fuselage.
Video Chapters:
0:00 - Introduction
0:30 - Resin Filler Explained
3:00 - Remove Tape
3:15 - Epoxy Resin Mix
5:50 - Filling Trailing Edge
7:00 - Filling Screw Holes
Can you make your own hydrofoil?
In my opinion, this is one of the best ways to make a hydrofoil from home. By design, the foil construction helps remove critical mistakes that people can make, leaving them with a hydrofoil that won't fly. The free hydrofoil plans are there to help you end up with a hydrofoil that works! So, If you're wondering if you can build a hydrofoil yourself DIY? You can!
How to make a hydrofoil playlist here:
VIDEO LIST:
1. How to Build a Hydrofoil: Planning and Design Principals (Part 1)
• How to Build a Hydrofo...
2. How to build a Hydrofoil: Machine and cutting outline (Part 2) • How to build a Hydrofo...
3. How to Build a Hydrofoil: Shaping the foil wings (Part 3)
• How to Build a Hydrofo...
4. How to Build a Hydrofoil: Resin Sealer coat (Part 4)
• How to Build a Hydrofo...
5. How to build a hydrofoil: Glassing the bottom (Part 5)
• How to build a hydrofo...
6. How to build a Hydrofoil: Holes and edge Resin filling (Part 6)
• How to build a Hydrofo...
7. How to Build a Hydrofoil: Top Fibreglass Lamination (Part 7)
• How to Build a Hydrofo...
8. How to Build a Hydrofoil: Resin "Hot Coat" (Part 8)
• How to Build a Hydrofo...
9. How to Build a Hydrofoil: Screw Holes & Final Sanding (Part 9)
• How to Build a Hydrofo...
10. How to Build a Hydrofoil Fuselage: - Planning & Drilling Holes (Part 10)
• How to Build a Hydrofo...
11. How to Build a Hydrofoil: Fuselage - Shaping (Part 11)
• How to Build a Hydrofo...
12. How to Build a Hydrofoil: Fuselage - Tapping Holes (Part 12)
• How to Build a Hydrofo...
13. How to Build a Hydrofoil: Fuselage - Routing (Part 13)
• How to Build a Hydrofo...
14. How to Build a Hydrofoil: Assembly and Final Points. (Part 14)
• How to Build a Hydrofo...
15. How to Build a Hydrofoil: The Test - Riding The Foil For The First Time. (Part 15)
• How to Build a Hydrofo...
Website Link: flukeskitesurfing.com/
Shoutout to Ryan parsons for helping test! / ryanparsonsofficial
flukeskitesurfing.com/