How to build a media wall with electric fireplace and TV | Media Wall Build

[@fishinggunsflyrods]

Removed a section in my camper where the entertainment area is and installed. Works great. Instead of propane furnace heat, I can use this kzbin.infoUgkxATHBlMJwipGgVWseuAFKvDQ_5R4_lywo to heat the camper as long as it's hooked up to shore power. Only thing I do not like is there does not seem to be a thermostat. I'm presuming it has a built-in one so it does not overheat. Really like all the other color options it has to offer.

[@MrandMrsDIY]

These are good ones, and do heat the room quite quickly

[@slamberm9494]

It's so nice to see that he's making a good honest living and had a continued success following on from big brother. A genuine nice guy

[@MrandMrsDIY]

Thank you very much, it means a lot!

[@slamberm9494]

@@MrandMrsDIY you're welcome Craig. You seem like such a humble person. I wish you the greatest success and maybe I'll call you for work on our house if you're still on the tools

[@gregc7699]

And Bo Selecta 🤣

[@skindawg3615]

Pal I've seen a few of these built and done them my self. I've used plasterboards and plastered it as that's my trade. I like the fact that you show and talk about what you're doing, measure, drill and fix your timber. Thankyou. Going forward I'll sort of follow what you do.

[@MrandMrsDIY]

Many thanks guys, Glad our videos have been helpful, I do prefer to plaster therm myself but as you know thats another skill in its self, I wanted to give the people both options

[@wemoveforward6413]

Quality video. Quality guy. I remember years ago watching you on big brother. Absolute gent. All the best mate

[@MrandMrsDIY]

Cheers guys, thats very kind off you to say.

[@Lee-vi6jm]

At this time of year friends and lovers should be near. Share the laughter and the tears.

[@MrandMrsDIY]

Absolutely!

[@michaellomax2]

Yep, looks good Craig.

[@MrandMrsDIY]

Thanks Michael

[@blaz8383]

Best video I've found online combining the media wall build and electric fire installation. My wall needs more depth than yours because I'm putting in cupboards either side of the media wall and wanted the sides of the fire exposed. But applied lots of tips from this video - great content thanks Craig!

[@MrandMrsDIY]

Many thanks for your kind works, were so pleased that our videos help, Please give us share on your social, Cheers

[@petehughes1644]

What is the best filler that is sandable, seen loads of comments elsewhere saying nothing adheres to mdf? thank you Craig! Looks spot on!

[@MrandMrsDIY]

There a number of different filler that will work, check out 3C's sealants website for further details,

[@ozoneswiftak]

Built speakers in my recessed flat TV mount. Not bad.

[@MrandMrsDIY]

Nice!

[@matthewmeighen4360]

Hi, I’m looking to do this on a stud wall, is it as simple making the base structure and attaching the angle joints from base structure into the wooden studs? How would I make sure the vertical wood above the fireplace is sturdy if these do not run parallel to stud work? Would a horizontal piece of wood (screwed into the studs) on the back to both vertical pieces of wood help create this sturdiness and take the weight off the fireplace? Any help would be most appreciated thank you !

[@MrandMrsDIY]

Yes as long as they are structurally sound and screwed into a frame as well as the floor and ceiling you should be okay. But I would consult with a local carpenter/joiner beforehand though just to make sure everything you're doing is structurally sound and safe! Cheers

[@binaryfinary2001]

Very nice and tidy job. Time for new power tools tho. The drill sounded like its had better days lol

[@MrandMrsDIY]

Silverline had now got a new cordless Power tool range out that’s a lot better

[@binaryfinary2001]

@@MrandMrsDIY the m12 range from Milwaukee is very diy user friendly/ professional grade.

[@ansarshazad7189]

Brilliant work just want to know that can we built in side a sold chamoni????? to cut the bricks

[@MrandMrsDIY]

Hi mate, what is that? Thanks

[@928DAVEH]

Best video I've found on how to build a media wall, easy to follow will be building one soon hopefully it will turn out aswell as this one, thanks 👍

[@MrandMrsDIY]

No problem! Let us know how you get on!

[@iang8520]

Interesting video with some great ideas. Watching you using the stud locator makes it easy to find the ceiling joists, but your ceiling joists run at 90 degrees to your frame, what if the joists run parallel to the frame and there is no joist to fix into directly above the frame?

[@MrandMrsDIY]

Yes this can sometimes be the case, then you'd need to use very good strong plaster board fixing drilled and installed into the ceiling then the Fram can be screwed to them.

[@adl2005]

Good job. I don't know if this has been asked before but, my only concern is if for some reason the fire develops a fault who pays for the deconstruction of the fire place.

[@MrandMrsDIY]

Good question, well the good news is that if there ever was a fault with the electric fire then all 3 section of glass from the front and both sides can be removed very quickly and easily, then all working parts of the fire can be removed and replaced without disrupting the fire place, in fairness there isn't really much that can go wrong with them, we've had our tow fire in our house for over 3 years now and all working perfect. Bespoke Fires fires all come with a warranty and they have a department that offer servicing to all units.

[@MrJokerh61]

Would have liked if you showed putting the bracket for the tv having problems getting the right

[@MrandMrsDIY]

Just depends on the size and shape! Do a dry run first with the panel that screws into the tv, and get your measurements from that, cheers

[@jamesnelson5885]

top man craig made this look so simple looks 👌

[@MrandMrsDIY]

Cheers James, it was!

[@trevorroutledge6239]

I’m about to build our media wall - similar layout to yours - however our living space is open plan & has vaulted ceiling so will only be going around 2.40m in height. We currently have 3 sets of double sockets at normal height & the TV is wall mounted currently along with HDMI cable - so sockets will need moving up into the TV recess. Electrician has suggested I build frame first then he does first fix electrics - does that sound reasonable? I will then plasterboard and get it skimmed then second fix electrics (we’re incorporating downlighters into recesses on either side of fire/TV).

[@MrandMrsDIY]

Thats great your building one, yes your Electrian is right, build your frame, let him in to do the first fix, board and skim, even pint then get him back for 2nd fix. Let us know howe you get on, or post your photos on our Mr and Mrs DIY Facebook fan forum

[@jwoo20594]

You know he's on the milwaukee as soon as the cameras are off 🤣

[@MrandMrsDIY]

Nope! I'm the Silverline brand ambassador!

[@user-bv5fm6wv8t]

Great job and very well explained. Can I buy one of these fires in the Republic of Ireland. I see there is a place in the north of Ireland but they don't sell to the public. Thanks.

[@MrandMrsDIY]

Thanks pal! You should be able to, I would contact Bespoke Fires directly and see if they can offer you any shipping bespokefireplace.co.uk/

[@lazyeejay]

Hi Craig, we're getting one made up in a couple of days. Just wondered in your opinion whether a soundbar is needed or not? How does the sound carry without a soundbar? Thanks👍

[@MrandMrsDIY]

Our sound still works perfectly so I wouldn't feel you needed one

[@SpartanX317]

Where did you get those beefy contractor pants?

[@MrandMrsDIY]

I think they were Blaklader! You can get some good ones from Scruffs as well

[@mr.nuna916]

When Sean Connery teaches you how to build a media wall. 🙃 lol.no but awesome video! This looks absolutely amazing 👏

[@MrandMrsDIY]

Thanks

[@kayjay8683]

Great video but that TV is too high.

[@MrandMrsDIY]

Thanks, its a personal chioce your hight

[@The160879]

Is there no heating barrier between the fire and the tv? If you put a dvd or your sky Q box where does that go and is there an access hatch? What about the PS4 I don’t see without an access hatch how you can achieve this. Also what if 55” TVs become obsolete and you’ve got to step down to 50 there’s no room to step up with re framing

[@MrandMrsDIY]

These kind of fires don't need a heat barrier between the fire and TV, the heat is blown away from the TV above, Other gaps could be cut and fitted to allow for other items like DVD etc,

[@ashleymapes3926]

Great build, just wonder how you measure the TV bracket to get the TV perfect inside the recess?

[@MrandMrsDIY]

Build your frame and recess to suit the size TV you have, then its a little tricky setting the TV bracket into position so you may need a couple of attempts

[@Tonypoolebcfc]

not seen you on the telly for ages ,great video cheers

[@MrandMrsDIY]

We only do a bit ob TV these days, most of our work is online now

[@MrDIYCraigPhillips]

Still do a bit but mainly online videos now a days

[@ekul1950]

Love the look of these, but always wonder of accessibility of things like a PlayStation/Apple TV etc? Couldn’t hide these in the wall as they need to be accessed or “visible” for the remote. Ideas anyone?

[@MrandMrsDIY]

Hi Luke, all of them can be included in the design so they work well and are accessible

[@jackathowarth]

You can get USB IR receivers.

[@coreywilliams5003]

Hi Craig is there a link for this fire place amazing video I’m looking to start building mine in a few weeks 👍

[@MrandMrsDIY]

Thanks Corey, Yes the link for there website should be in the description

[@gmack6459]

Hi, Great video. How long would you say it takes, from start to finish, to complete the job?

[@MrandMrsDIY]

Depends if you're doing it yourself or hire a contractor. It should take a full day to build the skeleton of the media wall and board it, then you'll have to wait for it to be plastered and dried before you can paint and decorate it

[@gmack6459]

@@MrandMrsDIY Thanks for that. Very much appreciated.

[@FunkeeDrewster]

Hi Craig, thats a very good build mate. Can you tell us how you painted the mdf for a good finish? Thanks 👍

[@MrandMrsDIY]

Cheers, I think I spray painted it, it was over 3 years ago now

[@MrandMrsDIY]

Check out some of our paint spraying videos if you've not tried to before

[@Steve-ArfArf]

Top video, legend can't wait to build mine

[@MrandMrsDIY]

Cheers, good luck with it, any questions just ask

[@wakenwaken3618]

I wondered if tv is not to high? What is the distance to viewer?

[@MrandMrsDIY]

It's all dependent on what you want! Just make sure you draw up plans and measure everything before you proceed with building your design

[@philiphamilton6135]

Goodjob fella

[@MrandMrsDIY]

Thanks Phil

[@Runawaygeekchannel]

I have a problem, where the motor for the bed light flicker effect echos within the cavity below the fire, how would you resolve this? Im not too keen on removing the wall sections as they are plastered and painted, would an expanding acoustic foam help?

[@MrandMrsDIY]

The glazing panels can be removed for any maintenance so it wouldn't affect your plastered walls

[@haroonkhan5933]

Where would you put a sky/virgin box?

[@MrandMrsDIY]

If you required further items to be installed like Sky/Vigin box then they would need to be planned into a further small opening right below the TV, or you could fit in another area of the room and just wire it across before the build so its connected to the tv but you don't see the cables

[@raymannix2880]

How much clearance would you recommend between the sides of the tv and recessed opening. Thanks.

[@MrandMrsDIY]

Depends on how big your TV is, and what the look you are going for is going to be like, for example strip lights in the sides etc

[@deanssj5453]

I'm not sure whether i should get a soundbar installed in my media wall next week? Is the sound from the tv muffled slightly if there isn't a soundbar installed as well?

[@MrandMrsDIY]

Hi Dean, we didn't install any sound bars in ours and our sound is fine, if your building your fireplace from scratch and your concerned and want the sound at a very high level then I'm allow for space in the structure for a sound bar

[@deanssj5453]

@@MrandMrsDIY thanks for the quick reply very much appreciated

[@MrandMrsDIY]

@@deanssj5453 Your very welcome, good luck

[@lateshialara9957]

Is it possible to build this without mounting or drilling into my walls for people who rent possibly on wheels

[@MrandMrsDIY]

Yes you could do but I'd be concerned it may come away if kids may pull or push it, you could always glue the frame to the wall with silicones so it could be removed without damage

[@adam212010]

What did you fill the joints with ?

[@MrandMrsDIY]

A 2 part wood filler, @3C do a great product that works very well on both MDF, Ply or wood

[@darrenmackenzie1892]

Why did you go with the mdf instead of plasterboard?? Im planning in doing this.

[@MrandMrsDIY]

We didn't have the time to skim it and wait for it to dry before we painted it

[@darrenmackenzie1892]

@@MrandMrsDIY I didn't think you would of replied but much appreciated it. I still remember 2001? I can't mind but when you tripped over the table in the big brother house and it was funny as hell!! I can still remember it today..

[@MrandMrsDIY]

@@darrenmackenzie1892 I wasn't in BB 2001, what table ?

[@darrenmackenzie1892]

I apologize it wasn't you it was jade goodie... Stupid me... Totally appreciate your time for replying back! Have a good Sunday

[@andrewredshaw1703]

Hi where is the tv bracket from ? The one I used last time had to be mounted off set and was a nightmare , This one seems much better

[@MrandMrsDIY]

You can get these Tv brackets from most Diy centres or online

[@hottopicuk0]

Can't I pay you to build mine 😫 Absolutely love this🥰

[@MrandMrsDIY]

We wish we had the time to.

[@katiefinnegan4649]

How have I only just found you on diy KZbin 🤦🏼‍♀️

[@MrandMrsDIY]

Glad to have you Katie! Make sure you have a look at our channel for more videos!

[@MrDIYCraigPhillips]

Cheers

[@Joolsandcol27]

Hi looks fab. Have you a video showing when you plastered the wall instead of mdf ?

[@MrandMrsDIY]

Thanks, Yes we do have another video in here thats within our 60 second DIY range

[@jacobturner6693]

Hi Craig, what size screws would you use for the mdf?

[@MrandMrsDIY]

Depends how thick it is! Usually the 40mm works for me but it just depends on the size!

[@lodgehousestudio6219]

How much is the exact fire used in this video? And what is the exact model please?

[@MrandMrsDIY]

Hi Jay, I got this fire from Bespoke Fireplaces. It was one of their panoramic range which you can find and more fires on this link: www.bespokefireplace.co.uk/bespoke-panoramic-1500-hd Thanks!

[@chrisbennett8538]

Nice I'd like to have one

[@MrandMrsDIY]

You should go for it, January sale on now

[@123MondayTuesday]

did they have one of these in the big brother house?

[@MrandMrsDIY]

Not quite!

[@Lil_Mood_]

Great work Craig, qq; is this typical hight for fireplace and tv? Like a bit high, unless it's a waiting/reception room. I've got a chimney best that is about 200mm deep and is made from blocks (was housing a gas fire). I'm planning to cutout the blocks to fit in an electric fire (approx 300mm off the floor). Any thoughts, concerns or advice is appreciated.

[@MrandMrsDIY]

Hi Bash, It seems high at first if you've not had your Tv on the wall, however its pretty stand the heights I've show in this video with a 2,4M high ceiling

[@SoleAngelus]

Great video, definitely on my to do list now!

[@MrandMrsDIY]

Cheers, Yes go for it.

[@A_Class216]

Is there a "ideal height" for installing a fireplace?

[@MrandMrsDIY]

Not really, you just have to decide on what type of look you want. Try sketching a few different versions for ideas.

[@craigcornes3538]

Anyone know what model of fire place this is?

[@MrandMrsDIY]

Yes its Bespoke fires own Panaramic 1500mm, we have tow fitted in our house and there amazing

[@mikebowden106]

Hi Craig, Great video. Unfortunatley my missus only allowed me to buy a 48 inch Tv! :) I am up to the fixing the top frame to wall and celiing(12:16) So my TV is 615mm in width and 170mm in length.. The fire and frame ive built is 1420mm width (12:31) I notice you have put more timber on the inside of the frame to accomodate the the 55 inch tv i assume- so when it comes to my 48 inch TV- I am assuming I will need To attach more wood internally to the frame to accomodate my TV and to fix the MDF too? (making sure of 12mm mdf top and bottom) Probably an obvious question/answer but I thought id ask anyway Hope that makes sense?

[@MrandMrsDIY]

Hi Mike, yes of course it makes total sense, I've spoken with a couple of people that have built one to the dimensions that I did to fit our 55INCH TV, However they had a smaller TV ( I think it was a 48Inch ) what they were aiming to do it further proof it for when they could afford to purchase a larger TV, but as you said just construct the frame that little bit smaller on the inside to capture for your size TV

[@Mackss-bk5ku]

How do I get into the cables at the back.or if I want to remove

[@MrandMrsDIY]

The Tv if fitted to a bracket that allows the TV to be pulled out so you can get behind at the wires, when building make sure your plugs ect are fitted higher on the wall

[@NevBlue149]

Great video. I feel like I’ve got all the info to be able to have a go now. What did you do about the joints in the MDF panels though?

[@MrandMrsDIY]

Many thanks Nev, I'd try gluing the joints, then move dried fit and sand any further gaps, once fulled dried, paint over then and you should be ok.

[@kitty7861123]

Hi Craig! Amazing work, this is something I’d never be able to do myself😂 how much should a builder charge for this on average?

[@MrandMrsDIY]

Thanks Hena! Not sure really, I would measure up your area and then call a few local tradesmen and get some quotes so it can be as accurate as possible!

[@quirk1982]

Hi Craig, great detailed video, thank you. I've watched a few of these videos, as I'm hoping to have a go at doing this myself. Just struggling with the idea of getting behind the TV for whatever reason. I sometimes move the PlayStation into the front room for instance, which requires access. How do we get behind the unit. Thanks.

[@MrandMrsDIY]

Thanks I'm glad you liked it, Getting behind the Tv isn't a problem at all, you need to purchase a TV bracket that can retract in and out this way you can always get at the plugs etc behind. any problems let us know

[@A_Class216]

Looks great by the way

[@MrandMrsDIY]

Thanks mate

[@christopherkennedy4872]

Hi Craig, great video. What would you recommend if wanting to do this on a carpeted floor? Would I need to cut out the carpet?

[@MrandMrsDIY]

Hi Christopher, yes you would need to if where you want your media wall is sitting on carpet, you can roll it back and then cut it when you're finished the project

[@Mr_Wanderlust1]

Hi Craig is this video u said u will go for a 55 inch TV. Is the fire not supposed to be 50 inch. I thought 1.5m fire was best suited for 65inch tvs.

[@MrandMrsDIY]

I'll check my sizers as this one was built 18 months ago

[@Mr_Wanderlust1]

@@MrandMrsDIY thanks u didn't mention 55 inch TV and 150cm length electric fire. I have purchased the 150cm length electric fire just need to get tv.

[@beatonthedonis]

@@Mr_Wanderlust1 A 65" TV is roughly 145cm wide. A 55" TV is roughly 123cm wide. So if you go for a 65" TV, you'll have 2.5cm margins on the sides of the TV, whereas if you go for 55", you'll have 13.5cm margins on either side (which looks like the ones in the video).

[@massivefitness3865]

How many lengths of 2x3 did this need mate

[@MrandMrsDIY]

We used around 8 lengths at 3 meters in length

[@massivefitness3865]

@@MrandMrsDIY thank you. One more question. Could you butt this mdf chimney up to a plasterboard wall on the 1 side? I want to join off the side of a plasterboard wall on the left as there is a step in or living room wall. Would I be able to butt this or should I clad the media wall structure with plasterboard instead?

[@endakelly4890]

Great job Craig 👌. Question, if you slab and plaster is it easy to remove the fire down the road in case there are issues or you need a replacement?

[@MrandMrsDIY]

Even if you have plaster board the frame, skimmed and painted it, you can remove the front glazing to get at all working parts for cleaning or maintenance, as well as re-place parts if needed. we plaster ours in our own house. check out or other videos

[@iawarburton2]

Very good video. What is the heat output from the fire or is it more decorative?

[@MrandMrsDIY]

There great, we have two in our house and they push out plenty of heat, Check out there website for the different rangers and sizers

[@chengchankong]

did you secure the bottom frame to the floor?

[@MrDIYCraigPhillips]

Yes I did do.

[@MrandMrsDIY]

You could silicon it to the floor

[@cc.xx.3230]

Nice

[@MrandMrsDIY]

Thanks

[@deldennis354]

What about if it’s just plaster board how do you secure

[@MrandMrsDIY]

Secure what?

[@deldennis354]

@@MrandMrsDIY the frame

[@georgesemple8136]

@@deldennis354 same wayvassown for mdf

[@fabiopita2897]

Good vídeo very helpful 💪💪How do we close the gaps on corners ?

[@MrandMrsDIY]

Thanks, Which gaps are you referring to ?

[@fabiopita2897]

The angles

[@MrandMrsDIY]

@@fabiopita2897 The outer corners of the MDF didn't need closing, if there a small gap it can be filled over with wood filler, sanded, then painted.

[@fabiopita2897]

Thank you

[@grablifebythehauls3902]

That looks ace!

[@MrandMrsDIY]

Many thanks

[@massivefitness3865]

Please can you let me know when the mdf touches the back wall and the ceiling how do you make the mdf meet flush with the wall or do you put filler in these areas?

[@MrandMrsDIY]

You can ether but it up to the wall and scribe the shape of the wall if its out, or if its just a very small gap I apply flexible paintable filler from a tube and gun, @3Csealants do a great filler perfect for this.

[@grahamcharlton861]

@@MrandMrsDIY Hi What 3C filler are you referring to for this particular

[@MrandMrsDIY]

@@grahamcharlton861 At which part off the video please

[@grahamcharlton861]

@@MrandMrsDIY You mentioned a filler?was asking what make and type do you recommend

[@MrandMrsDIY]

@@grahamcharlton861 I would recommend a flexible, paintable filler such as the premium paintable acrylic by 3C Sealants!

[@avisgrant9918]

Hey great work one question though did you use corner bead for the finished corners?

[@MrandMrsDIY]

Thanks, no I didn't use corner bead as it was an MDF painted finished, if I used plaster board and skimmed the finished yes I would of used a bead

[@Stumc46]

Does the downward heat go into the wooden framework ?

[@MrandMrsDIY]

Hi! No, it pushes out in front of the fire, not contacting the wood

[@saulwilliams1899]

Looks great! Wasn’t you on big brother by the way?

[@MrandMrsDIY]

Thanks, yes 21 years ago

[@saulwilliams1899]

@@MrandMrsDIY I thought it was, love your channel it really helps with doing work around the house keep up the great work

[@karenredrup2933]

This is next on my to build list. Does anyone know the pros and cons between using mdf and plasterboard? I was hoping to have an electric log burner at the foot of ours. Would that make a difference on the decision of mdf or plasterboard?

[@MrandMrsDIY]

Bespoke fires don't require any fire regs materials around them MDF is fine to use, as for the log burner I'm not sure about them as ive not used one, but if in doubt please use fire retardant plasterboards.

[@LevelUpTrivia1]

qrtr of a million views and only 12 tousand subs well ill be subbing kidda

[@MrandMrsDIY]

Many thanks

[@kevinwiltshire1455]

Hi Craig, thanks for the video, all useful information. I’m about to build our media wall and clad it in mdf like you did. You mention 15mm mdf but I’m only seeing 12 or 18mm at my local suppliers, will 12mm be ok? Also, did you scrim the mdf where the joins meet before filling?

[@MrandMrsDIY]

Hi Keven, thanks I'm glad you find our videos helpful. Yes both 12 or 18mm would be fine, No I didn't scrim the joints, I'd glued them and added fill, sanded them before painting

[@pauldent3059]

How old is that drill your using Craig, I had the set with the circular saw and jig saw.

[@MrandMrsDIY]

Only a couple of years old,

[@DrunkenKnight71]

'Bespoke Fireplaces' and 'Fireplace Factory' is one and the same company?

[@MrandMrsDIY]

Hi mate, I think they are separate companies. Thanks

[@DrunkenKnight71]

@@MrandMrsDIY ok interesting thanks...they are based at the exact same address and Fireplace Factory states that Craig is their ambassador

[@MrandMrsDIY]

@@DrunkenKnight71 Cheers

[@michaelspraggon2883]

Which stud finder are you using?

[@MrandMrsDIY]

Its a Silverline stud finder, cheap and cheerful but work very well.

[@michaelspraggon2883]

@@MrandMrsDIY great thanks

[@charlottemoore4210]

Looks great! How much would this cost in materials?

[@MrandMrsDIY]

Around £200 for the frame and boarding then depending which size/style fire your choose its could be from £1000 to £1800

[@toont6749]

Where do you put the virgin or sky boxes or PlayStation etc ?

[@MrandMrsDIY]

You can adapt your plans of course to suit whatever extras you can have, you can leave more space between the TV and fireplace and have an internal shelf in there

[@amaringoodwin4980]

Craig I need you to build me this please 🙏 😢 😭

[@MrandMrsDIY]

I would if I had the time my friend

[@adammorley6571]

Building this currently and new to DIY. What do you find the best way to cut the mdf so it’s straight and also what did you do for the edging where the 2 boards meet in the corners at the front so that it’s flush when painting. I know with plaster board they use angle beading. Thanks

[@V1er1f1ed]

use a plunge saw and you use an MDF edge sealer at the corners, such as shellac

[@MrandMrsDIY]

Yes a Plug saw with a guard will help you cut strait lines in your MDF, glue the corner and screws fix together and then when there dry sand them down so there smooth, fill any gaps, sand again once dry and you're ready to paint.

[@ryanh3285]

Some DIY stores will cut them for you but in my experience they don't like doing it.

[@stephan20008]

Don't know what to use to go into stud walls

[@MrandMrsDIY]

I'm not to sure of your question sorry Stephan

[@mr.be.5630]

Its Craig ffs

[@MrandMrsDIY]

Yes it is!

[@Dawgley]

are you alright mate? why is it so dark in your workshop?

[@MrandMrsDIY]

Hahaha all good here! This was our old lighting kit, as you can see from our latest videos our workshop looks great!

[@christinagavriel5047]

Who and where can i get this done for me ?

[@MrandMrsDIY]

www.bespokefireplace.co.uk/bespoke-panoramic-1500-hd

[@ace514ify]

There is a company to fix at this ?

[@MrandMrsDIY]

Yes you can get the Fireplace from Bespoke Fireplaces, but for the media wall side, if you're not DIY savvy, you could always call a local carpenter or a joiner and get a quote for your room.

[@navneetsingh3526]

what sort wood you use for frame

[@andrewredshaw1703]

CLS 3”X2”

[@MrandMrsDIY]

@@andrewredshaw1703 Thanks

[@MrandMrsDIY]

Yes 3x2 CLS is fine

[@cjwaywell]

This makes it look easy, but most chimney breasts aren't square neither are the ceilings, the fire usually sticks out far more. In a perfect world everything would be square but it isn't unless it's a fake wall. But at the end of the day all this frame is is something to screw the plasterboard onto so you could make it out of anything.

[@mrandmrsphilips4105]

He used a telescopic TV bracket

[@MrandMrsDIY]

Thats right, A telescopic TV bracket will work well

[@MrDIYCraigPhillips]

All TV brackets are different shapes and sizers so I can't give a set size, most opt the time in the middle of course, but you need a telescopic bracket to pull out to hook the TV on

[@markjonathan7726]

@@MrDIYCraigPhillips could u please confirm what tv bracket you used? Do you have a link? Thanks 👍🏻

[@MrDIYCraigPhillips]

@@markjonathan7726 Hi Mark, I'm sorry I don't have one, I just googled them and found dozens to pick from

[@Michael-pd4wu]

Tv looks too high.

[@MrandMrsDIY]

It may look like its a little high but we've got used it now and it works so much better.

[@Michael-pd4wu]

@@MrandMrsDIY I suppose it all depends how far away you sit. It does look fantastic and the fire effect on that unit is the best I've seen.

[@MrandMrsDIY]

@@Michael-pd4wu That's right, our dinning area were the fire is is quite a long room as we have an open plan kitchen alongside it so it doesn't look high at all. I think everyone has to make there own decision on the hight they fit there Tv and fire as the hight off the ceiling and size off room will play a role.

[@ryanh3285]

Looks great but the tv will sound terrible

[@MrandMrsDIY]

Ours is sending perfect, we've done tow in our house and there great.

[@ryanh3285]

@@MrandMrsDIY Is that with a sound bar?

[@MrandMrsDIY]

@@ryanh3285 No we don't have a sound bar on it, to be honest we brought one and never ended up fitting as we had two TV's fitted one each side of the fireplace, omits still in there box in our cupboard!

[@sibbyvansibby2226]

Making the frame with wood and having a electric fire isn't that dangerous

[@MrandMrsDIY]

No not all with this kind of fire

[@sibbyvansibby2226]

@@MrandMrsDIY thanks👍

[@DeeTeaDee]

No players, consoles, sky boxes, access to firesticks TV etc . Very nice but zero practicality . Hardly a “media” wall. But rather a TV WALL

[@MrandMrsDIY]

WE made the video over 3 years. ago when media walls we're coming into fashion, Our video designed for beginners basic frame, off ours other gaps can be created for Sky boxers ect if they have the space

[@maxstafford4007]

What you built is cool and all, but those fireplaces allways look tacky no matter what you do with them.

[@MrandMrsDIY]

Really, what looks tacky about them, I thought this one I built in the video looks great, I'm that please with the finished look I'm installing two in our new house, one as a 3 sider like in the video then the other one is just the standard single glassed front

[@maxstafford4007]

@@MrandMrsDIY oh dude your build I solid, it looks great. I just don't like the look of electric fires they never look right. They allways look paper fires you get a cheap events it's just my opinion dude. Like if it had a real fire it would be awesome. But then it would set on fire 🤣 so I guess I'm just picky

[@MrandMrsDIY]

@@maxstafford4007 You know what Max I had the same view as you about electric frame fire for a number of areas when then first came over 10 years ago, I kept seeing them get a little better each year but still wasn't convinced until 12 months ago when me and Laura found the local suppler to us @Bespokefireplaces then as soon as I se there's we wanted them for our house, in fairness the video dopant make them look thee best, they look even better close up and working.

[@michaellomax2]

Always enjoyed your work on tv shows that featured DIY. And I remember you winning the first British Big Brother TV show.

[@MrandMrsDIY]

Michael Lomax thank you