How to build a RC Boat - Full instruction tutorial

How to build a fast RC boat
Step by step guide, from start to finish. Wood working, carbon and glass weave laminating, hardware installation, DIY solutions, and running result of a twin motor mono, called the G-Force 😎
Esc watercooling mod video:
• RC boat DIY how to: Im...
DIY Carbon Fiber lipo plate video:
• How to make your own c...
Forged carbon fiber rudder video:
• RC Boat build: how to ...
Boat spec:
Length: 850mm or 33.5"
Width: 245mm or 9.6"
Esc: 2x 150A Flycolor:
s.click.aliexpress.com/e/_Evx...
Motor: 2x Rocket 3670 1850kV:
s.click.aliexpress.com/e/_Eyu...
Lipo: 2x CNHL 6S 3000mAh 100C
Drive: dual DIY stingers
Props: 43mm 1.6 pitch
Speed goal: 140 km/h or 87.5mph

[@oscarmartingarcis2181]

En el aeromodelismo en vez de usar bridas para conseguir dar las curvas a los listones utilizamos alfileres y así no pierdes la brida el alquiler lo clava solo hasta la punta y luego lo recuperas

[@CozyRC]

Good advice! But the stringers are bent under quite some tension sometimes, and then a ziep tie will work great. Thanks for your comment ✌️

[@N2SRC]

Watched all the build videos but very neat to have the whole process in one video. Very nice as always DJ

[@CozyRC]

Thanks for your support! I thought the same 😎✌️

[@NoMatterDesign]

Another evening workig on my boats... (waiting for printed parts) and another inspiring Cozy video. Match made in heaven. :) Cheers

[@CozyRC]

Thanks José! It's too cold in my workshop still, but I hope to work on my projects soon again! We got ice on the ponds, too.. so no boating for now. ✌️ DJ

[@NoMatterDesign]

@@CozyRC Yeah quite icy here too. I miss the good old rainny days in the UK. lol I'm getting my 1/5 scale going. The 1/10 ( aroun 600mm long) version 3 is progressing nicely. I weighed the boat body today 750g without any electronics. Not too bad. Question for you Sir. Would you think a a 4082 motor would be enough to move a boat about 1200mm and short of 3.5kg? Or should I think about going with something bigger? Cheers

[@CozyRC]

@NoMatterDesign Good to hear that your projects are going well! A 1200mm hull is pretty big. In my opinion, too big for a 4082 motor. Besides the hull weight, the motor needs to move the hull surface through the water. 3.5kg is extremely light for such a big hull. Do you mean empty hull weight? My T800 F1 Tunnel weighs about 3.1kg ready to run, and it's only 830mm long. ✌️

[@NoMatterDesign]

@CozyRC Hi. Thank you for your reply. As you can see my knolage in RC ends the moment I finish printing something. Yes I was referring to the empty weight of the 1/5 Hull. It's made in sections and glued for shape. Then epoxied for esthetics and toughness. Since its a monocoque construction it ends up pretty light. Hull itself is 1050mm the rest is the motor. Combined, assembled length is 1200mm. Cheers

[@hichemmokhenache7954]

It is amazing piece, great job

[@CozyRC]

Thanks Hichem, enjoy the build! And let me know how it turned out 😎

[@jonnyshobbies]

Awesome build, love watching your videos!! Both entertaining and instructional. Do you happen to have the link for the template?

[@CozyRC]

Thanks Jonny! I share these plans for a small fee. Please send me an email at cozyrc1 at gmail.com if you're interested. ✌️ DJ

[@obaits3225]

Do you guys sell boat hill plans. I found you looking for I for on the “wild thing” hull. Looks like you built a 32” for p mono. I have a 22” version that was built for n mono. Great work keep it up!

[@CozyRC]

Hi, I will share the 32" plans for a small fee. Please send me an email at [e-mail] if you're interested. ✌️ DJ

[@boatwerks]

Dj how come you do not apply fiberglass or carbon fiber to the bottom sheeting inside before you attach them to the frames in a wet condition?

[@CozyRC]

H Scott, that would have been a great idea. I thought of that, only after I added the bottom sheeting.. But that would have been easier for sure, and also a neater result. Thanks for thinking along, I appreciate it! ✌️ DJ

[@boatwerks]

@CozyRC I have been doing that on my latest builds makes for a nicer finish inside

[@mada-un9il]

Great work ❤How do you control the boat ? Arduino??

[@CozyRC]

Thank you! I control it with a 2 channel 2.4Ghz transmitter. 1 channel for throttle and 1 channel for steering. ✌DJ

[@mada-un9il]

@@CozyRC can you make a video explaining it . Appreciate you🥰

[@CozyRC]

​@mada-un9il Please see this video. I show the transmitter and receiver I use for my boats: kzbin.info/www/bejne/iYnQq6dtpsdkl5Y

[@dionesiorazonable5168]

HI Bro do you have Boat blue Print. tnx advance

[@CozyRC]

Hi, I can send the Wildthing drawing to you. It is a similar hull and very fast. Send me an email at cozyrc1 at gmail.com if you're interested.

[@mohammedfahad6563]

Bro can you give plan ❤

[@CozyRC]

Hi Mohammed, sure. Send me an email at [e-mail] ✌️

[@mohammedfahad6563]

@@CozyRC bro i send email

[@shkelqim6]

is posible to send me me the pdf plan please

[@CozyRC]

Hi, I can share the Wildthing plans, it is a similar boat. Send me an email at [e-mail]

[@yourfriend3999]

​@@CozyRCthank you

[@HmSayed-ml3ik]

Dear friend, i want to make this boat with your Plan, can you give me your plan🥹

[@CozyRC]

Hi Sayed, please send me an email at [e-mail] 👍

[@HmSayed-ml3ik]

@@CozyRC dear, I have already sent an email to you. Would please check?

[@HmSayed-ml3ik]

@@CozyRC I have already sent an email to you, please check