How to Build a Table Saw Cabinet | DIY Woodworking Storage

[@Fixthisbuildthat]

Get the PLANS HERE: fixthisbuildthat.com/tablesawcabinetplans

[@mclarkin0906]

that looks like a 36" saw stop? is that correct? any issues with removing the support legs on the wing?

[@brickdaddiy]

I love the sliding doors. Makes it look so much better and organized than just flat drawers

[@Fixthisbuildthat]

+The Beardless Man thanks, Donovan! Totally agree. And I love the framing of the vertical panels and the drawers.

[@bbbrandon8481]

Brad after watching two videos I subscribed. I like that you're not fake. You admit to screwing up and fix it. No one's perfect even with a lot of planning. Awesome videos keep it up!

[@Fixthisbuildthat]

Thanks for the sub, Brandon!

[@priayief]

Some great ideas here! I made my tablesaw cabinet about 3 years ago. Wish I had seen this video first. Thanks for posting.

[@Fixthisbuildthat]

+Captain Ron thanks!

[@stevegronsky8904]

I just downloaded your plan and I will build one of these shortly. Great way to organize table saw "goodies" and use otherwise dead space. Thanks

[@Fixthisbuildthat]

+Steve Gronsky awesome, Steve. Thanks for the support!

[@828media2]

Brad you killed this project!! Great job!! this is a must for under the table saw!!!

[@Fixthisbuildthat]

+Todd Ellefson thanks, Todd!

[@DiomedesArgos]

This is one of the best looking plywood boxes. So satisfying.

[@Fixthisbuildthat]

+Geoff Else may as well make them look nice, right?

[@dynamicsx]

Just finished this build today. Great plans and great video. Fits nicely under a Delta 36-5152 T2 with a router table installed on the right side. Finally have oall my table saw and router gear in one place.

[@jeffdeluca1153]

Dude you're like poetry in freakin motion! Wonderful craftsmanship! Great construction tips!

[@gbjones54]

I have the same issue. Great example of what can be done. Nice job on the build and the video. Thanks Brad.

[@Fixthisbuildthat]

+Gary Jones thanks, Gary!

[@garymucher9590]

Nice build. Good to know we all make silly mistakes building things. But dealing with them and fixing them so it doesn't show is the real craftsman's ability. Well done...

[@Fixthisbuildthat]

+Gary Mucher thanks, Gary!

[@onetruebob_tj]

Excellent craftsmanship! Added this to my ever-growing project list.

[@Fixthisbuildthat]

+westcoastotb so many projects, so little shop time 😃

[@smc4lcc]

Great use of space under your table saw. I only have a job site table saw st the moment but I can see how this build can be applied to other storage solutions around my shop. Thanks!

[@Fixthisbuildthat]

+Shawn Chamberlin you're welcome!

[@bigdogmn73]

I purchased the plans and I have to say great job Brad as providing great detailed plans. I've purchased other plans from other youtubers and I was disappointment with the lack of detail around the cuts. Your plans are really helpful and give all the detail you need! Nice job Buddy!

[@Fixthisbuildthat]

Great to hear that, Nate!

[@TheAverageCraftsman]

My table saw accessories are strewn about my shop. I really need to do something like this. Great video and project, Brad.

[@Fixthisbuildthat]

+The Average Craftsman thanks! It'd a real game changer for organizing

[@theoldplankwoodworks2415]

Love it! One of those annoying areas in a lot of shops (including mine) put to great use. Great build!

[@Fixthisbuildthat]

+The Old Plank Woodworks yeah, it was a black hole for me.

[@BronkBuilt]

Very nice build and lots of great tips for doing a bunch of drawers. Thanks for sharing.

[@Fixthisbuildthat]

+BronkBuilt thanks!

[@WARinMYhead1]

i really like your style of building cabinets. you make it feel so easy that I think I could do it. I'll be trying it very soon, thanks for the videos!!

[@markushensel7712]

Please do more woodturning. The series you made was really good.

[@Fixthisbuildthat]

Thanks, Markus!

[@mkushin]

Great project!! I love the vertical slide-out storage. Gonna steal that for sure.

[@Fixthisbuildthat]

Awesome, have fun with it!

[@randizzle7659]

Buying the plans now. My son and I are building the bed of your design, lathe cabinet and storage cabinet in three weeks :-) love your designs and plans!

[@Fixthisbuildthat]

+Randy Green that's awesome, Randy! Tag me on social so I can see the builds if you post them. Thanks for your support!

[@randizzle7659]

Always! I was concerned about buying plans at first, but fast and secure with no issues. Keep up the great content

[@ChestnutRidgeWorkshop]

Great use of space under the saw, think I'll borrow your idea for that dust collecting dead space under mine! Keep up the awesome work!

[@Fixthisbuildthat]

Thanks!

[@pauldobler2779]

Of all of the designs that I came across, this was the best one. Congrats

[@John_Malecki]

Really good use of space brother. I dig that hanging storage for push sticks and blades. May have to steal that !

[@Fixthisbuildthat]

+John Malecki thanks, brother! Punch it in the face!

[@Looyenss]

and he finally did!

[@MrFFP123]

Love the functionality of this! Building it!!!

[@danhgilmore]

I just finished mine. Thank you so much for the video, inspiration, and plans :)

[@artagain8977]

Super job. Thanks for doing this project for us subscribers!

[@Fixthisbuildthat]

+Artagain you're welcome!

[@diegoarmijo1426]

Excellent! I'm getting right on my own build. Thank you.

[@Fixthisbuildthat]

+Diego Armijo thanks!

[@SwearingenTurnings]

Thanks for posting this video. I modified your plans to fit it between my saw's body and the router table hanging closer to the end of my 52" rails. It's a great use of other wise dead space!

[@darrellv8187]

Man, I like that cabinet! Now I'll need to get some Kreg stuff.

[@Fixthisbuildthat]

They are great jigs!

[@koryjames8361]

Beautiful design and great execution.

[@Fixthisbuildthat]

thanks!

[@ctfleming85]

The spacers are great for aligning drawer hardware. A good tip is to lay the cabinet on its side when installing them, gravity holds the slide and the spacer in place, keeping hands free for attaching.

[@Fixthisbuildthat]

Yup, I did the cabinet on the side trick for the sliding panels. would work for those too

[@cedaroakfarm8596]

Perfect for the new table saw. Good video and great shop project.

[@jeffforbes3772]

Pretty cool Brad. Good tutorial on the drawer building and install.Thanks for sharing

[@SirBenJamin_]

that's awesome Stifler! .. good job

[@Fixthisbuildthat]

+wforl try the pale ale

[@SSBailey77845]

I've been looking for a good "under the saw" blade and doo dad storage cabinet. Most of what I've seen involve an expensive CNC machine but, dang, I just won't spend that kind of money. Great design and I love the vertical "drawers"...brilliant! Nice job!

[@WayWoodworking]

You make plywood furniture look amazingly beautiful! Great video, as always!

[@Fixthisbuildthat]

I kinda like baltic birch :)

[@tomsdreamshopworx]

Nice job! I've been threatening to build one of these for years now, someday. Might steal a few ideas.

[@Fixthisbuildthat]

Steal away!

[@mceepee]

Great design, layout and execution! Thank you for posting!

[@felixfromnebraska8648]

Great project Brad! I have a SawStop with the same open space. Now I just need to get your plans and make it. Thanks for sharing!

[@Fixthisbuildthat]

You're welcome!

[@masontejera506]

Been loving all your cabinet projects!

[@Fixthisbuildthat]

+Mason Tejera thanks! It's been awesome getting organized.

[@86jmcade]

I saw today's IG post on this cabinet. This is a great idea, dont know how i missed it last year.

[@MrRosco9er]

Good work Brad, looking forward to doing something similar

[@Fixthisbuildthat]

+Brad Ross thanks!

[@vinnyvillano8862]

Hey this was a great project, thanks for the plans. I have the contractors sawstop so I changed some of the measurements. Same height and depth but only 19 inches wide. I loved the technique of cutting the drawer fronts from one panel this gave my cabinet a great look. In fact it looks to nice to be in my shop. It’s nice when you learn something new.

[@WatersideManor]

Just completed my build of this yesterday. Thank you!

[@jreitzes]

I just built this and it's fantastic!! Thanks!

[@redsalem7686]

Downloaded your plans and made the cabinet, it turned out pretty well, thanks for posting.

[@jamesonelam]

Great use of the space Brad!👊

[@Fixthisbuildthat]

+Jameson Elam thank you!

[@Thom4123]

Awesome build!!!! I definitely need to build one I have a similar issue but I thought a cabinet would be perfect NOT. This is what I need, besides my cabinet now only holds my saw blades and table saw wrenches. I’ll definitely be buying the plans in the near future. Awesome job!!

[@Fixthisbuildthat]

+Thom spillane thanks, Thom!

[@mcattack2009]

Dude! I love how you did the vertical drawer! Been looking for a way to do it for my air tools. Totally using your method. Great video man and happy New year!

[@Fixthisbuildthat]

Thanks, Marc!

[@InfiniteCraftsman]

This has been on my list for a while.

[@Fixthisbuildthat]

+Infinite Craftsman mine too!

[@RodDecker]

Absolutely Brilliant

[@TempleThomas]

just found this - you're one of the top results for "table saw storage cabinet" on google, just FYI :) And I've now subscribed, love your work

[@DavidEricPrates]

10:33 ...That's top notch bro! Nice work

[@Fixthisbuildthat]

Thanks, man!

[@731Woodworks]

Awesome work! Love it

[@Fixthisbuildthat]

+731 Woodworks thank you!

[@francismallard5892]

These videos are truly great. If you could only show and record everything 20% slower, they would be perfect.

[@traylormade1215]

Awesome Cabinet and great use of space... Keep the good stuff coming!!!

[@JackmanWorks]

Vertical drawers! Yeah baby!!!

[@Fixthisbuildthat]

Yeah boy!!! Sorry I forgot to call you out in the video :( I tried to make up for it in my IG post though :)

[@JackmanWorks]

Fix This Build That I'll only hold a grudge until next year 😜

[@jaykepley5238]

Awesome design! Really enjoy your videos and style. You're one of the very best on KZbin. Happy New Year!

[@Fixthisbuildthat]

+Jay Kepley thank you, Jay. Happy New Year!

[@SpencleyDesignCo]

Thanks brad!

[@bobcade1002]

Very nice cabinet. I ordered the plans on your website. Looking forward to building this one! Thanks!

[@heffronswoodworking5287]

Great video and plan, as usual! FYI, the plan says you need 7 drawer slides, you really need 9. Building it this weekend. My pile of crap is actually bigger than what you showed! Keep ‘em coming, Brad!

[@heffronswoodworking5287]

Ok, so I’m an idiot. You need the 7 that the plan calls for.

[@Torsan1977]

Impressive! Nicely done!

[@Fixthisbuildthat]

+Torsan1977 thanks!

[@greenlandinternational502]

I love your videos Brad. Keep building great projects!

[@RichardMKane21]

Awesome idea. Just found my next project!

[@JonathanRansom]

This project turned out nice!

[@Fixthisbuildthat]

+Jonathan Ransom thanks!

[@BudjetBassin]

Such a great video!Really enjoyed the builds!

[@TeamProsperity]

Very nice Brad! I like that! I have the 3 HP 52” Professional cabinet saw and I think I need something like that. Great design, thanks but I think I’ll make a few changes in mine but yeah when your shop is small turns out thats a lot of wasted space under the saw

[@Fixthisbuildthat]

Yes, it's a great way to reclaim the space

[@lightning4871]

Second time seeing your channel and of course have subscribed. You have some fine equipment and use them well. I hope to learn in the future.

[@TJSWOODWORKINGSHOP]

Awesome project my brother I love it good job you are the man bro :)

[@Fixthisbuildthat]

+TJ'S WOODWORKING SHOP thanks, TJ!

[@wgsnssssssss]

Nice work as always

[@Fixthisbuildthat]

+gssns thank you!

[@akquicksilver]

Nice build brother!

[@Fixthisbuildthat]

+JB Marker thanks!

[@MakingAndFixing]

You give great ideas in your videos and explain things so clearly. I love this project. :-D

[@Fixthisbuildthat]

+Making And Fixing thanks!

[@gmor46]

That is awesome! Thanks

[@Fixthisbuildthat]

Thanks!

[@kevinetheridgemakes]

sweet! I really dig this project. Loved that tip about chamfering the bottom of the drawer. Very nice :-) Cheers!

[@Fixthisbuildthat]

Yeah, it's a great little hack

[@johnfabula]

Great build

[@Fixthisbuildthat]

+John Fabula thanks, John!

[@dmoss8928]

Awesome cabinet.. You could even use some Kaizen Foam mounted in the drawers for some super neat storage!

[@Fixthisbuildthat]

+David Moss that would be nice!

[@scirtoceacatalin4499]

Very, very, very NICE

[@Fixthisbuildthat]

+Scirtocea Catalin thanks!

[@JTWoodworks]

Awesome stuff Brad! I'm going to have to check out your plans. However, I'm still deciding if I should use that area for my shop vac and dust separator

[@Fixthisbuildthat]

Yeah, I still need a good storage solution for those too :)

[@KnottyDogWoodshop]

Awesome video! thanks for posting!

[@Fixthisbuildthat]

You're welcome!

[@FredMcIntyre]

Awesome job Brad! 👍👊

[@Fixthisbuildthat]

Thanks, Fred!

[@TheBeerbelly007]

Nice build---

[@Fixthisbuildthat]

Thank you !

[@jean-paulpaix7835]

Love it, mate....

[@BigLate]

Fantastic!

[@chrystald.]

Nicely done!

[@Fixthisbuildthat]

Thanks!

[@rohawaha]

I have been trying to avoid this project in my shop for months , but I guess if it will give a reason to order a Kreg 4 pocket hole jig I will go ahead and do it !

[@Fixthisbuildthat]

As you could see I avoided it for far too long as well :)

[@sumandl]

Great Job!

[@Fixthisbuildthat]

+SAWBLADE PROJECTS thanks!

[@woodworker1470]

Good job

[@daddywoofdawg]

I drew a design very close to that and posted the design on FB about a month ago, and then started the build.I see a couple Ideas of yours I may go back and do I used a full sheet as a divider may pull it out and do strips like you did,(save wood)

[@Fixthisbuildthat]

+James McGuire yeah, saves on Wood and weight!

[@TachiOhyo56]

great！！　wonderful！！！

[@Fixthisbuildthat]

Thanks!

[@jcjrsmith]

I will be adapting this idea for my Grizzly table saw. Oh, and Go Bearcats!! McMicken College of Arts & Sciences class of 1983.

[@danhgilmore]

I just bought your plans....can't wait to build it. Sadly, most of our stores are out of good Baltic birch plywood :/

[@brianp1993]

Awesome idea!! I will be ordering your plans here shortly...as soon as it gets above 30° here that i can work in the garage...lol. Soooo what's with the table with the dog holes....where might someone find one of those? Lol

[@lisag2771]

Love the bevel on the bottom. Great work.

[@Fixthisbuildthat]

Thanks!

[@MikkoTikkanen]

Extra points for DL-44 😁

[@FranksDIY]

Great idea

[@Fixthisbuildthat]

+Franks DIY thanks!

[@zrxgrim]

Is that a Han Solo DL-44 push stick? Very nice!

[@Fixthisbuildthat]

Yep!

[@buckeyeboi2010]

UC Bearcat? Nice!

[@charliethomas8253]

Great project Brad! I have a SawStop just like yours. Now I just need to get your plans tried to buy it tried to get page to open with no success with out a plan i just have a hope and a prayer

[@lucaamoreb.8889]

Fantastico.

[@Fixthisbuildthat]

+Luca Amore B. Thanks!