How to Build Wood Towel Holder / DIY Project

[@jimalford6359]

Very clever love it thanks for sharing

[@BaronDePrime]

It looks very cool. However, it's a minus right away, you need 2 hands to hang a towel. Usually I threw it on a hook or a crossbar and quietly left. :)

[@antoniotop5377]

Sin necesidad de palabras, se comprendió muy bien. Gracias por la enseñanza

[@MG-vo7is]

Nice designs.

[@JajaNurjaman-w3f]

Maasyaa Allah,anda jenius

[@mywiwood]

شكرا لك على المشاهدة (Thank you for watching)

[@pierregaudettte3736]

Will try these out I want to try some for some hats too I will keep you posted thanks a lot for the good ideas

[@jimrosson6702]

Very cool. Thanks for sharing

[@fathogwoodworking]

That’s a very clever design. Well done on a great video.

[@jimgeelan5949]

Ive just subscribed, i think that ingenious and i would like to see more of what you do. As for the 949 I’ll bet they have never made a thing in there life. 😊

[@mywiwood]

Thank you for writing your opinion🙏

[@МаксимВилков-ю9и]

Это круто

[@stased7343]

How do you recommend attaching them to a wall? Thanks in advance for your answer!

[@mywiwood]

Thank you for watching! I used double-sided tape for this, and I'll share the link to the specific model I used. It can be the best choice for bathrooms and kitchens. Another method is to use hidden screws that attach the piece to the wall without compromising its aesthetic. www.amazon.com/x15-4Ft-0-045in-Mounting-Adhesive-Waterproof/dp/B0D12BDLKS

[@stased7343]

@@mywiwood Thank you for the link! I think I will also do a little research into using hidden screws. Maybe a keyhole slot?

[@mywiwood]

Yes, you can definitely use that method! .Although I used adhesive and haven't had any issues for several months.

[@stased7343]

@@mywiwood Good to know! Thanks!

[@rajeshkrtewari2543]

Keel se hi kaam chal jata hai

[@BrandonCabanillas]

Gorgeous. Do you have pdf plans with dimensions and cut list?

[@mywiwood]

Not from this project, but you can use this link es.pinterest.com/pin/285837907597856248/

[@acerjuglans383]

The plans are the video you just watched. And a cutlist?!? Seriously? Each one had 3 pieces of wood. If you look at the ruler, you can see the dimensions. It's. Not. Complicated.

[@jimgeelan5949]

If you need plans & cut list for this you should never go near sharp tools 😊

[@altheaarnold6141]

How did you hang these on the wall?

[@mywiwood]

I fitted with double glue the adhesive link I used www.amazon.com/x15-4Ft-0-045in-Mounting-Adhesive-Waterproof/dp/B0D12BDLKS/ref=vse_cards_7?_encoding=UTF8&pd_rd_w=L8Nek&content-id=amzn1.sym.84452b36-260f-47dc-ba27-aa6ccac30233&pf_rd_p=84452b36-260f-47dc-ba27-aa6ccac30233&pf_rd_r=KS8Y61NTMA3TGE9AV8PD&pd_rd_wg=uyQ7c&pd_rd_r=682716a8-d8c5-406b-887b-97dfcc21b3dc&th=1 The best choice for bathroom and kitchen is this adhesive model I installed in the bathroom for about three months with this glue and it didn’t cause any problems

[@Vandilbg]

Must assume adhesive command strips, no accommodations for it in the design.

[@mywiwood]

I used glue on both sides It is a good option for the bathroom and kitchen the adhesive link I used www.amazon.fr/EMITEVER-Imperm%C3%A9able-Temp%C3%A9ratures-D%C3%A9coration-R%C3%A9paration/dp/B093PZHX9P/ref=pd_sbs_d_sccl_3_3/257-3180394-9089135?pd_rd_w=QIIpi&content-id=amzn1.sym.1bd7499a-b5a4-4cfd-b572-31cff782fc15&pf_rd_p=1bd7499a-b5a4-4cfd-b572-31cff782fc15&pf_rd_r=35M21TC0TSWPQY0J41JC&pd_rd_wg=b9bLB&pd_rd_r=e8b507ae-9b8c-47e6-9a43-1ab4b14a326b&pd_rd_i=B093PZHX9P&th=1

[@mywiwood]

@@Vandilbg Use this glue www.amazon.fr/EMITEVER-Imperm%C3%A9able-Temp%C3%A9ratures-D%C3%A9coration-R%C3%A9paration/dp/B093PZHX9P/ref=pd_sbs_d_sccl_3_3/257-3180394-9089135?pd_rd_w=QIIpi&content-id=amzn1.sym.1bd7499a-b5a4-4cfd-b572-31cff782fc15&pf_rd_p=1bd7499a-b5a4-4cfd-b572-31cff782fc15&pf_rd_r=35M21TC0TSWPQY0J41JC&pd_rd_wg=b9bLB&pd_rd_r=e8b507ae-9b8c-47e6-9a43-1ab4b14a326b&pd_rd_i=B093PZHX9P&th=1

[@MarkBelain]

I sped the video up to 2x and it felt like it wasn't even slowed.

[@lennyferreira8382]

Difícil 😢

[@mywiwood]

Quando você começar a fazer isso, perceberá que não é tão difícil✊

[@craftsmanwork.John.Calderon]

FOR THE PEOPLE WHO THATS NOT HAVE ANY IDEA ABOUT CARPENTRY IF YOU PUT THE MEASUREMENTS IN THE SCREEN WOULD BE FINE FOR AS LIKE WE KNOW CARPENTRY AND KNOW ALL ABOUT MEASUREMENTS IS NOT A PROBLEM BUT FOR SOME PEOPLE ITBIS THANKS

[@mywiwood]

Thank you for watching .If you like to make this clamp, ask any question, I'll help .The size of the wood depends on the free face .But you can use two 5*2 inches of wood

[@craftsmanwork.John.Calderon]

NO NO TALKING IS GREAT IF CAN SEE IT YOU CAN BUILD IT IF CANNOT DO IT SORY IS NOT YOUR THING THANKS

[@mywiwood]

producing videos without speaking so that more people can benefit from the videos

[@craftsmanwork.John.Calderon]

THANK YOU FOR NOT TALKING BULL3R55ET THANK YOUUUUU KZbinRS WHO TALK AND TALK HEIGHT THEM ONLY SOME OF THEM TALK JUST A LITLE BIT JUST A LITTLE BIT IS OK I PREFER NONTALKING

[@hunglikeahamster]

It's a nice idea but: 1 It looks weak because it has no jointing, just glue. 2 You made no allowance for concealed fixings. Presumably you just attached it from behind a board for the video? 3 Because a visitor to the house wouldn't know how it worked. They will probably rip it off the wall. I like it though. I think I'll make a version where i have several of them attached to a long board i can fix to the wall.

[@acerjuglans383]

😅😅😅😅

[@mywiwood]

Thank you for saying your opinion completely. I tried to answer completely to help on the first point There are two ways, first, that you can connect all three sticks with one pin The second solution can be made by creating a groove next to the piece and connecting a piece of wood on the second point I glued this with glue on both sides The reason for this is that this project is used in the bathroom and kitchen I preferred to stick with adhesive on both sides If you want to use screws, you can use this product www.amazon.fr/DOJA-Barcelona-Fixation-Fixations-SCellement/dp/B0CSKNPDWN/ref=pd_lpo_sccl_2/257-3180394-9089135?pd_rd_w=q88LZ&content-id=amzn1.sym.4e3a5592-2463-4291-a0f2-dfe2f1ad87af&pf_rd_p=4e3a5592-2463-4291-a0f2-dfe2f1ad87af&pf_rd_r=4MA52KYP31HN8K2Q203N&pd_rd_wg=ovhW6&pd_rd_r=eb389c35-a08c-43fe-9f2e-02dd3782b088&pd_rd_i=B0CSKNPDWN&th=1 I hope it helps

[@chuckstoup3961]

So tired of these silent movies. How about sharing your expertise?

[@mywiwood]

I think the video is completely out .On this channel, I wanted more people to use the language they speak.

[@CountDoucheula]

Shut up, chuck. Everything involved was possibly displayed for all to see. If you can't figure it out from there, maybe you shouldn't be using power tools at all...

[@d.keithshores4500]

I always complain when people talk to much, here im complaining becusse you didnt talk at all, a little instructions for us newbies would be amazing just saying

[@mywiwood]

I’m not talking here so that more people in any language can use this content. I’m sure if you watch the video twice you’ll understand . If you have my question, you can ask .🙏

[@imaginitivity7853]

Basically you always complain😂

[@Underachiever_Files]

It's the universal language of CRAFT.

[@mitchd949]

Poor design, very weak. Looks nice but that’s not enough.

[@mywiwood]

Have you tested this؟ Tell me every problem to tell you the solution

[@michaelcox1071]

@mitchd949 - you can't break those glue joints without a hammer/lever. If anything, they are far stronger than needed to hold towels.

[@Underachiever_Files]

People just don't understand how wood and glue work... the bond it's down to the cellular level, remember, wood comes from trees (living beings) which have cells as basic units. Glue goes down to that level to bond the the pieces. Of course you may use waterproof glue for better results.