Thank you so much.Just finished a pad and rotor change and watching this video allowed me to be fully prepared for what was needed to do the job both effectively and proficiently.
@adolforamirez5197 Жыл бұрын
Thank you so much for your video!
@richardfabrizio8998 Жыл бұрын
Great job. Like torque info. Thanks
@georgenumber42573 жыл бұрын
Great job Adam with the multiple camera angles, breaking down of the steps (with some tricks) and providing torque values. I just bought my 2013 Accord and it gives me confidence that I could avoid the dealer costs and do it myself. Thanks.
@alanchanthavisouk85573 жыл бұрын
Best video by far 👏
@mikeypooh13 жыл бұрын
Good job! After seeing this video I’m more confident about tackling the job. How long did it take you to complete all four rotors and brakes?
@pawcioko4 жыл бұрын
Fantastic job. Very informative. Keep up the good work 👍
@jacksampson77113 жыл бұрын
Very nicely detailed video. I'll be doing this soon. Thank you.
@dj.excess4 жыл бұрын
AWESOME Vid! 42k miles on my v6 accord and still havent needed to change the, but think it will be soon. I think i might give this a go.
@apevang29602 жыл бұрын
Quick, simple video. Thanks.
@kd2154 Жыл бұрын
I would add that you should relube the sliding caliper bolts.
@ceejayy77924 жыл бұрын
Bro this is the video I needed!!! Thanks
@ocxsierra_1173 жыл бұрын
Very well constructed video, keep up the great work
@obxguy12 жыл бұрын
Just did this yesterday on my 18 accord! Those rotor screws are a bitch!!! I went to harbor freight and bought the same impact driver you had. Worked well on 3 rotors. Then it broke on the last one. I had to improvise. Also the rear emergency brake is a pain screw back.
@mohindersingh72922 жыл бұрын
Explain very nicely good job 👍
@lukey65443 жыл бұрын
Precision,. Precision,. Cool info. 👍👍
@ShopEightyFive3 жыл бұрын
Thanks 👍
@RudeJoe013 жыл бұрын
Some of the best videos I've seen for how-to. No nonsense and includes the torque values. BUT! for this specific video and your rear brake video you didn't check the guide pins for fee movement and regrease. Perhaps you live in a warm climate and don't have to worry about winter and salt on roads. Here in the north I've frequently found guide pins stuck from corrosion.
@yunglin90254 жыл бұрын
Nice Video! I was wondering that the torque of pin bolts of front brakes are usually larger than the rear ones? Thanks
@antoniogarcia73583 жыл бұрын
Your videos are awesome!! Very detailed and straight to the point. Can you do one on changing the brake fluid
@mchevownr2 жыл бұрын
Awesome video! I really appreciate the torque values and socket and/or tool sizes. Do you have a video with rear pads and rotors? Thanks in advance!
@noahhunt79612 жыл бұрын
We need more videos like this lol no bullshit intros and stupid talking to the camera when it’s not needed. Thank you for your service sir. I’m done paying people hundreds in labor to do my brakes
@MrYapayepe4 жыл бұрын
Great info...thanks s lot.!!👍🏻
@germanramirez63304 жыл бұрын
Do you have the link for the impact screwdriver?
@ShopEightyFive4 жыл бұрын
Here is the one I use: amzn.to/2yd2OoB
@germanramirez63304 жыл бұрын
Thank you !
@ShopEightyFive4 жыл бұрын
I see you meant Screwdriver. Here's a link for one: amzn.to/3g3iSu5
@germanramirez63304 жыл бұрын
Adam Williams what size F Clamp did you use for the front and back?
@ShopEightyFive4 жыл бұрын
It was a 6 inch bar clamp from harbor freight.
@Dope6oyzInc3 жыл бұрын
Off topic. What type of tires did she have on in this video and did they last you a long time?
@ShopEightyFive3 жыл бұрын
Goodyear Assurance
@DonnieBoiTV4 жыл бұрын
only question i have is how do you know when youve tightened the bolts enough? idk alot about cars and didnt know there was a specific torque you had to tighten too.
@ShopEightyFive4 жыл бұрын
You can pick up a relatively inexpensive torque wrench on amazon or harbor freight in a pinch.
@marquessimpson45784 жыл бұрын
How did you you fit that Torque wrench back there. I had to tighten mine with a regular wrench
@TheLofree852 жыл бұрын
How did you torque the Phillp screw on the rotor?
@ShopEightyFive2 жыл бұрын
Torque wrench and a 1/4” socket with a Phillips bit.
@Nodirm934 жыл бұрын
4:52 are you sure its 37 lb ? other video said its between 9-10 lb. Cuz when i changed my rotors that bolt wouldn't stop spinning.. 37 is too much.
@ShopEightyFive4 жыл бұрын
Yes, 37 lb-ft is correct, straight from the Honda Service Manual. The rear bolts are significantly less because the caliper is much smaller.
@Nodirm934 жыл бұрын
@@ShopEightyFive Thank you, that makes sense.
@wang16214 жыл бұрын
I’ve watched all your Accord videos and is waiting for this brake video a long time😃 Did you only change the front or both front and rear? At approximately how many mileage?
@ShopEightyFive4 жыл бұрын
I did both the front and rear. The video was going to end up being way too long. Rear brakes video coming soon.
@Tommy9111k4 жыл бұрын
What size is that clamp, 12 inches? Thanks in advance
@ShopEightyFive4 жыл бұрын
6 inches but I tell the ladies it’s a 12.
@juniorcorrea16563 жыл бұрын
What happens if you don’t put the bolt back on the rotor *
@ShopEightyFive3 жыл бұрын
The lug nuts will hold it all together in a pinch but ideally you should replace it.
@juniorcorrea16563 жыл бұрын
@@ShopEightyFive the bolt strip off and I snapped it in half. The other half is stuck in the tread