How to change HeadGasket 1.5L Turbo 2018 Honda Accord Part 1

[@GaryHester-ul9qv]

My son’s 2018 Honda accord 1.5l turbo just did this at 82,000 miles. The five yr. warranty had expired as well. Took it to the dealership they estimated a 4000-6000 cost to repair it. I say all that to say this, thank you for the videos (parts 1&2) on this issue with this engine! Because of your videos and instructions within them gave me enough confidence to repair it myself at home. Keep in mind all I ever done is oil changes and break jobs on my vehicles, so I considered myself unable to fix this car on my own. This channel is definitely a blessing and saved me and my family 1000’s of dollars so I can’t thank you enough! I’ve liked and subscribed without hesitation to your channel and its videos, what you teach and put out is value filled and helps families like mine! Blessings from our Lord Jesus to you and your family!

[@a2zautomasters862]

That was the main reason I’ve created this channel to help the average person do their own repair and save $$. I’m glad I can help. Thank you for the kind words and your feed back. God bless you and your family. 🙏🏻🙏🏻

[@waybach]

Same!! Thanks brother!

[@a2zautomasters862]

@@waybach 🙏🏻🙏🏻

[@kana5732]

Yes same happened to my daughter car

[@godric908]

You should get him something nice like a gift for his garage. A nice comfortable boots to work in or a power tool or battery replacement since those degrade. A JBL Flip 5 audio bluetooth speaker.

[@rolandotillit2867]

If anyone watching this is going to DIY, make sure you have plenty of zip lock bags. Label the bags and put the corresponding nuts and bolts in the bag. For example, label a bag intake bolts, and put all the bolts for the intake in that bag. This will help tremendously on re-assembly.

[@Maroco918]

Words to live by

[@Xopher30]

And take a lot of pictures. I have a small dry erase board I write step numbers on (1, 2, 3,... 235, 236, etc) and go in reverse order when re-assembling.

[@RemingtonScarborough]

@@Xopher30💯💯💯

[@Jay-fq8uz]

How hard was this job for you?

[@rolandotillit2867]

@@Jay-fq8uz After the 10th time I got it down to 3hrs from start to finish taking my time. 2hrs if I haul ass.

[@MrSupernova111]

Amazing walkthrough! But that's an insane amount of work for a non-professional. Thanks for the video!

[@BIGFRANPRODUCTIONS]

I have the same car and if my car ever blows its gasket i know for sure that i can work on it because of you thank you so much man the wolrd needs more mechanics like you man much respect ❤

[@MrCt302]

This needs to be a class action lawsuit. This is a shame for a car not to reach 100k miles without pre mature head gasket failure..

[@fourly1410]

Foreal they obviously did this on purpose to make more $$ , it’s messed up my brother just went to the dealer ship and they want to charge him 5 grand … like na bro.. I told him I’d do it . Seems like a lot of work to just take the shit out.. I’ve worked on some of the worst engines ever made and honestly this might just top the bar for the hardest engine to fix just look at all the shit you gotta take out. What type of Japanese bullshit is this .. I miss the old 99 Honda civics 🤣🤣

[@24inchesinpants]

Mine failed at 145k

[@captainseadog7600]

True none of these cars don’t even reach 100k

[@VinnieLJ]

I’m glad that I didn’t give up my 2010 Honda Civix Ex with 302k. Never had any engine issues

[@odisecarr5774]

Great Video! Daughters 2018 Accord Dash looks like a christmas tree. dealer said head gasket and fuel injectors. $5800.00 . keep up the good work.... ill be watching..

[@winchells]

My 2018 Honda Accord 1.5 turbo is way over 125,000 miles and I've had no issues at all! Well i try to make sure that I change my oil ( Honda synthetic or Mobil 1) on the recommended 5,000 miles or even less and get only 93 octane gasoline plus I try not to abuse the car and I drove it normally as much as possible. The only issues I've had were my brakes.

[@SirUncleCid]

Cool!

[@rcole3838]

Unfortunately, changing the oil has little to do with the head gasket blown

[@winchells]

@@rcole3838 Can you tell me what is the reason behind why the head gaskets are blown. I am not a mechanic I just wanted to share about my 2018 Honda Accord reaching more than 125K miles w/o any issues.

[@Bfg-yi2id]

@@winchellsit’s a combination of things. The stock boost pressure on these cars is high, 16.5psi on the civic and more for the accord the stock head bolts on the 1.5t cars are made from poor quality metal that stretches over time (causing the head to lift) and they are thin to begin with. People have also said that the torque on the head bolts is not always uniform from the factory (causing uneven clamping force) Honda added passages between the cylinders on the block that allows coolant to flow. Ford tried this sort of design and had the same issues with the head gaskets a few years back The stock turbo on the 1.5t cars spools very quickly, leading to more torque down low (getting the car off the line faster) but also increasing the strain on the head bolts I upgraded to ARP head studs on my 18 civic for peace of mind. If you don’t drive your car hard and is mostly highway driving you may not have much issue, but if there is a lot of city driving or you abuse it regularly it’s more likely to happen Also use the highest quality gas you can, detonation from using 87 is not your friend

[@winchells]

@@Bfg-yi2id Thanks for the technical explanation! Yes you are right, normal usage of the car without any abuse coupled with proper maintenance will surely be fine!🙂

[@baileyhefner1668]

I just had my head gasket blow in my 2018 honda accord and of course the warranty company is refusing to cover it. This video is so in depth and easy to understand im tempted to do the work myself now!!! Keep up the amazing content!

[@natedogg8648]

What warranty did you have

[@natedogg8648]

So sorry to hear that buddy

[@TMm-ez2lf]

2017 crv with 102k blew the head gasket. Dealership quoted 7500, the engine bays between these 2 vary but your direction especially with the timing components helped alot, thank you.

[@manlb9254]

Hello i believe the problem with this engine is the fuel being added. The 1.5 turbo is a 10:1 compression engine and quite high for a turbo engine. There for 87 octane fuel is too low and with the high compression created detonation. The head gasket has a coolant passage between between the cylinder wall so thats the weak point. With the combination of detonation and the design of the head gasket creates this failure. My advise is to use 91 or higher octane on these engine for proper combustion.

[@SirUncleCid]

It's actually pretty wild they suggest 87 is ok in the manual.

[@dennisd1778]

Compression is not the issue , people are using theses engines as high performance and running them hard and not maintaining them ,any turbo engine is under pressure. And needs top quality fuel and not regular 87 and high quality synthetic oil ! Anyway these engines were designed for fuel economy And regular driving

[@ikramghias2730]

Do you think using 89 would help compares to just 87. I'm a student so it would really suck to have to put 91 especially when the gas prices increase.

[@nickwackenhuth1584]

@@dennisd1778all of you have the wrong idea, it’s actually a lot simpler. Honda made really weak headstuds for this motor. The turbo pressure is enough to make the frail headstuds stretch and the head actually lifts off of the engine a few mm. This is enough to allow coolant past the gasket and for it to unseal and fail. Preventative measures for people building this engine like me: ARP headstuds. On a stock car it should be fine with stock studs but Honda failed on these ones. My car runs 28psi of boost (stock is 19psi on the civic si I believe) and have had no issue for 40k miles

[@PurposeDrivenHabits]

The stock head bolts stretch under the turbo

[@gianfrancoa]

Thanks for the video!! Surprised that we are seeing failures on these 1.5T Honda engines!!

[@a2zautomasters862]

Thanks for watching! Yea. I really thought those engines were a lot more reliable but have seen 3 now with major failures. Like misfire with low compression.

[@justinvidrine2857]

Got a 2018 1.5 liter head gasket got a pinhole in it. Right at or a little over 90,000 miles. Thought they supposed to be bulletproof New day and age 🤦🏻‍♂️

[@a2zautomasters862]

@@justinvidrine2857 🤦‍♂️

[@swright4000]

Agree! I was shocked when I figured it out. The cvt transmission is another weakness I change the oil every 40k.

[@theholt2ic219]

@@swright4000 the cvt transmission is the least of your problems same as the oil dilution people complained about. Even the turbo in the 1.5t is fairly reliable. The 1.5t has a design flaw mainly the head bolts being too weak to handle it causing it to lift. Honda saying 87 octane is fine is part of the issue. The 1.5t can be reliable but it cannot be driven hard like at all. I wouldn’t drive this fast ever to be honest. and it needs 91 octane. To me that is a design flaw

[@thechuckster6838]

This is a great video. You have added another level of detail. Thanks for sharing this.

[@Stargate555]

Having the same issue with my 2017 Honda CRV touring with 60,000 miles. Losing about a quart of coolant every 5/6 weeks and having throttlebody issues that the dealership could not figure out. Loved the car but it had to go.

[@rcole3838]

Sounds like the early 90s Ford Tauruses, with their blown head gaskets

[@simonallsebrook777]

Hello very good info I've got 1liter turbo I love my car going to try to renew my bet thank going to take photos how to put it back to geater you've saved me a lot of money and how you explane everthing😊

[@LivingLife128]

I have 2 vehicles with this engine. A 2107 CRV and 2020 Civic. After watching this video and hearing what the cost to repair it, i am going to do it myself . Don't look too hard . i will probably replace the bolts with ARP studs while i am in there .

[@dave0z96]

Great video I haven’t had a problem with mine it’s at 200K but if I do will definitely be using your video as a reference . I think all they had to do was design the block with a closed deck and bigger head bolts and it would have been a bulletproof engine and they should have seeing as it’s a small displacement turbo engine but they wanted to save a small amount of weight and money instead I guess .

[@jimbike8064]

Very good video. have a 2020 Accord exl 1.5 with 42k miles.. I bought the extended warranty due to this turbo engine being fairly new on the Accord. I assume head gaskets are covered by warranty? Hoping to keep this vehicle for at least 5 more years. Thx.

[@natedogg8648]

No don’t assume anything make sure your gaskets and seals are covered as well I had to make a motification on my warranty as well

[@dustincollins16]

My 2020 accord 1.5t has 121k miles. Yesterday I noticed all the coolant was gone in the coolant reserve bottle. Other than that the radiator is still full to the top when I took the cap off. Iv noticed zero issues with the engines performance yet. But I sure hope that's not a sign of the head gasket starting to go. My car has been maintained perfectly and 95% of those miles are highway driving. I drive 140 miles a day to my job all interstate

[@user-uk1oq4to6b]

Update??

[@GodGunsGills]

It's definitely the head gasket issue! Please file a claim with Honda USA

[@bigytv8392]

Thank you for this great tutorial. I watched both parts with great interest. I have the following question: is it possible to remove the timing cover after you removed the valve cover, i.e. a post accident the car has a broken engine mount on the passenger side as well as pointy mount on the timing cover. I was hoping to remove and replace the timing cover without doing the entire head gasket procedure.

[@LuisLPRCs]

2018 honda civic hatchback cylinder head gasket replacement labor hours? It's in the dealership and they charging like 6 grand mostly labor. My question is how many hours it takes to change the cylinder head gasket?

[@NotxOmnis]

just took a look at the labor guideline for my sisters 2018 accord 1.5t. that one calls for just shy of 16 hours.

[@mikethompson3534]

What is the purpose of those notches between cylinders except to cause problems? Are there different special types of head gaskets to prevent leaks between cylinders

[@iknowgood2403]

Yes cometic gasket and arp head bolts will solve it for good

[@rolandotillit2867]

This engine could have been better maintained. All that varnish in the engine usually means that oil changes aren't done as frequently as they should be. If you change the oil regularly and on time, the engine will be spotless on the inside, even if you use conventional oil.

[@flyingjeff1984]

Then you don't tear down many 1.5l turbo Honda engines. Designed to fail.

[@rolandotillit2867]

@@flyingjeff1984 all engines are

[@JOSHUAGALVANN]

@@flyingjeff1984i have a 2018 honda accord 1.5 at 130k miles haven’t blown the head gasket runs great still.

[@JohnS-il1dr]

​@@JOSHUAGALVANNso far. Give it 10k miles. Its not the maintenance, its the inherent design flaw. Same issue as the 1.5 ecoboost by Ford. Both have a groove inlet between the cylinder walls which allow coolant intrusion.

[@Danny-de1gn]

About to attempt this tomorrow. Do you have a recommendation for a good digital torque wrench

[@powayimports4175]

For the occasional use I would get a harbor freight Icon. Don’t go with the cheapest ones out there.

[@a2zautomasters862]

I use SnapOn products but it’s really expensive to buy it just for this job. He might be right 👆🏻👆🏻

[@MrSupernova111]

I'm not sure why you need a digital torque wrench. You can get a CDI torque wrench which I believe is made by Snap On but at a better price. Not cheap but very high quality torque wrench. If you don't want to spend tool truck prices (snap on, matco, mac, etc...) any common brand should get the job done. Also, you'll probably need various size torque wrenches.

[@a2zautomasters862]

@@MrSupernova111 you definitely don’t need anything expensive or fancy as long as it does the job accurate but I like to use high quality tools since I use them on daily basis

[@MrSupernova111]

@@a2zautomasters862 . I was replying to the original comment. I realize people who use tools daily need the highest quality. The rest of us aren't in that category.

[@Kr0n3kLe]

Thanks for the video.

[@luisrosales3633]

Great job on your video

[@ywilhemraymond3480]

Hey question you shop located in NYC

[@albertomagallanes7872]

How you doing A2Z auto masters. I just recently had a head blown gasket on my 2019 Honda Accord 1.5T sport at 120k miles. Took it in at Honda for a diagnosis and a cylinder 1 misfire came out and my spark plugs and injectors were good but however after performing a leak down test, the Honda dealership recommended a replacement of a head gasket and depending how bad the stop leak I may need components of the cooling system also replaced. What is the difference from my situations to this situation? A reply back will be so helpful please and thank you

[@louisevans2000]

How much more difference on doing this on 2.0 vs 1.5

[@MichaellaMendivil]

Where did you buy the gasket from

[@rolandotillit2867]

Ways to avoid head gasket issues, run 93 octane, DO NOT LUG THE ENGINE(ie floor it at low rpm), LSPI blows head gaskets on these engines like nothing. Avoid LSPI by not flooring it in the 2,500-3,200 rpm.

[@luismarty1685]

What is LSPI?

[@rolandotillit2867]

@@luismarty1685 low speed pre ignition. It can destroy an engine quick.

[@luismarty1685]

@@rolandotillit2867 thank you

[@razvanaxinie4495]

so you should not floor the car when you are at low rpm in high gear but rather downshift, or you should avoid flooring when you are between 2.500-3.200 altogether irrespective of gear? (although the 2nd option does not make much sense to me). What about when driving upwards on a hill?

[@rolandotillit2867]

@@razvanaxinie4495 Not flooring it in the danger zone is best for longevity. You spend less time in the danger zone in lower gears because you go through the RPM faster. In a higher gear, you spend more time in the danger zone because RPM builds slower. You want to avoid flooring it in the danger zone if you want the turbo engine to last.

[@simonallsebrook777]

Hello just need info please what size drill bit did you use to lock cam togeter thank if you no brill to watch

[@Diyaatv]

Super 🤞 thank you for your time and efforts

[@a2zautomasters862]

Thank you

[@et5256]

18:23 what tool is that called or can you use just a wrench

[@stills4844]

Please respond to this , I had my head gasket replaced by Honda it’s 2018 Honda accord 1.5 93,000 miles , when the car was returned to me a day later , I got the warning lights , it came back as code p2651 Honda said I have a bad vetch solenoid, it’s getting replaced under warranty. Would a bad head gasket job cause it to fail ???

[@amirhakim4719]

This repair can be for the 2.0 L as well I just realized I have a head gasket issue with my Honda as well

[@natedogg8648]

How many miles

[@et5256]

Where do you find a head gasket kit at??

[@chrisarreguin7363]

Is this the same process for the civic 1.5 turbo?

[@ceezedgerman]

Is this process the same for the 2018 2.0T engine?

[@njackson18]

The 1.5 is not very good. the 2.0 is a much better engine. It has far less stress and better parts

[@rmgallegos41]

What was the time frame to do this ?

[@sabrinabarrineau4394]

Is there a redesigned head gasket for these cars

[@a2zautomasters862]

Not that I’m aware of.

[@brewyawn3394]

There is. Check with your local honda dealer. Part number should end in A001 not A000

[@itzhassanplayz909]

@@brewyawn3394full part number?

[@PurposeDrivenHabits]

Problem isn’t the gasket. It’s the stock head bolts stretch under the turbo and cause head lift

[@isaacidrees1111]

Hello, did you get the head resurfaced?

[@a2zautomasters862]

No. It did over heat couple of times for only few minutes and the head look good so I didn’t see the need for a machine shop

[@swright4000]

i have one with a bad head gasket. 2018 Accord!

[@swright4000]

it idles rough but seems to run fine at speed. it drinks about 1/2 cup of antifreeze a week.

[@a2zautomasters862]

Yup. That’s definitely a head gasket

[@natedogg8648]

@@swright4000how many miles on your accord

[@swright4000]

@@natedogg8648 it started about 140k but it has around 185k now. It drives fine but I add 2 cups of antifreeze per week.

[@swright4000]

@@natedogg8648 I'm convinced its "detonation" that is causing the bad head gaskets. The correct octane gas should be 91.

[@wantingasecondchance3931]

Took my car for the job you’re doing on the video. Can you believe after a month, I got a check engine light. And got an p0302 code. Took it back to the shop where I had the job done. Can you believe the owner of the shop refused to look at my car? It got so bad that he called the cops on me and had me trespassed. Also he had my car for almost two months. 60 plus miles was added on to my car. Now is that normal?

[@a2zautomasters862]

Wow. That sounds like a very bad business. That’s a misfire Cyl 2 code. Might be just an ignition coil or as bad as bad head gasket job

[@firstlast---]

There are two sides to every story

[@Jay-fq8uz]

How much did you charge for this job?

[@diosirisliriano8820]

you the man

[@michaelunis8808]

I’m stuck at trying to get the injector connectors off. Any advice?

[@ramonramirez1311]

Por abajo los puedes desconectar

[@damntomato6451]

Bro I followed your instructions step by step and was able to remove head but WHERE ARE THR INSTRUCTIONS TO PUT EVERYTHING BACK TOGETHER?!

[@GodGunsGills]

Part 2 Please file a claim with Honda USA and report to the Attorney General

[@sabrinabarrineau4394]

Mine misfires at random on different numbers and then other times its fine. Is that also symptoms of a blown head gasket

[@star9732]

More likely clogged fuel injectors. Try Lucas fuel treatment and report back.

[@GodGunsGills]

Head gasket!!! Please file a claim with Honda USA and report to the Attorney General

[@kayladukes8042]

My head gasket is apparently blown and I want to fix it myself. I just hit 90,000 miles I’m so upset.

[@ikaikastevens3712]

Would this be the same for a manual transmission honda?

[@claytongorell6227]

yes, same engine different transmission, assuming you have the 1.5t

[@chriswheeler5150]

😂 maybe you shouldn't be doing it yourself

[@wotechart2743]

I can't believe Honda dealers charging $3800 for replacing $100 part it's insane. I have 1.5 Accord I don't have a issue with it yet but if I do I know what to do now thanks!!!

[@GodGunsGills]

Please file a claim with Honda USA and report to the Attorney General. So we can get a recall

[@chriswheeler5150]

It's not the Part it's the labor

[@ywilhemraymond3480]

This job take a long time

[@Justin-cl7lg]

2019 accord head gasket cracked or blown at 50k miles

[@saltysteeze8136]

Any one know cam holder torque spec on these engine?

[@billbaca1095]

I would of expected alot better engine from Honda

[@JosephStumpp-pr8sc]

I never worked on a major job before , this to me is like another language, i wish i was more mechanical enclined . To me it looks like u have to remove the entire top of everything over the engine , rite ?

[@GodGunsGills]

Please file a claim with Honda USA and report to the Attorney General

[@ramonramirez1311]

How much is the price for this work

[@PurposeDrivenHabits]

Anybody have a list of tools needed before starting

[@calahanmedia9218]

Sucks to think I live paycheck to paycheck and this type of repair would bring me to my knees 5,000$? Jeez

[@a2zautomasters862]

Yea a job like that range 4-6k everywhere. I usually do it for about 3k to help fellow youtube followers.

[@MrSupernova111]

Insane! Honda is not what it used to be.

[@jeretso]

Avoid the turbo. I will stick to my normal engine. $5,000 will buy a lot of gas for my V6.

[@GodGunsGills]

​@a2zautomasters862 are you in Texas?

[@Xccord]

My 2021 accord at 24k miles has a leaking headgasket.. this engine is so infuriating

[@kana5732]

This happened to my daughter car, Honda should. Pay for these they want 3500 just to fix

[@GodGunsGills]

Please file a claim with Honda USA and report to the Attorney General. So we can get a recall

[@luisrosales3633]

This needs to be a recall..

[@luisrosales3633]

My 2018 honda accord with 105,000 miles and it already has a blown head hasket

[@toddsmith1617]

Why is everyone using high test gas. Is that what honda calls for. If so thats very expensive. I will pass on buying a turbo.

[@Altima131]

Well damn. That’s why Honda is charging $4000+

[@jeretso]

I will just keep my V6 forever. $4,000 buys a lot of gas. No turbo for me.

[@domzcollesso9070]

I can buy a engine for less 😂

[@GodGunsGills]

Please file a claim with Honda USA and report to the Attorney General. So we can get a recall

[@rodgerpetrick6502]

This shows that all carmakers do not make vehicles like they use to

[@aijoe3]

I just had my head gasket blow sunday on my 2018 honda accord. Quoted me $6k for a new motor since coolant leaked. Im calling corporate today to see if i can file a claim since looking at the comments i am not the only one with this issue

[@axelr8219]

Any update about a claim? I just had this issue happen to me, Dealer quoted me 4k to replace head gasket at 105000 miles. It’s unbelievable how quick this car is having these type of problems with normal wear and tear…

[@aijoe3]

@axelr8219 No luck since my car is out of warrenty and not a recall best corporate could do is file a complaint for me...more people need to call it in at this point

[@natedogg8648]

@@aijoe3I bought a 5 year unlimited mile warranty because of this exact issue 🤦‍♂️

[@rcole3838]

Wouldn’t it have been an overall easier job just to pull the motor? Yes, motor mounts, transmission would need disconnecting. The space available underneath the hood for such a pitifully small motor is nearly nonexistent.

[@theram3964]

Same "great" cooling passages between cylinders as ford's 1.6, 1.5 and 2.3 liters (4 cylinders, ecoboost engines, produced until 2019)....ford changed the design and eliminated the cooling passages between cilinders; instead they designed it with a small hole because changing the head gasket on the old design would fix the problem only on short term....

[@billmalec]

2018. Head gasket already? So much for 'Honda reliability'...

[@fireemblemaddict128]

The 1.5T is the problem. Small engine, too much power.

[@mitchhedberg4415]

Meanwhile, 1.6 l toyota Corolla GR is 300 hp@@fireemblemaddict128

[@aaronbryan5095]

​@@mitchhedberg4415 dude, Toyota's 1.6L turbo is designed for high performance usage from the get go, Honda's 1.5L turbo is just a hoped up and overworked Honda Fit engine.

[@heldercorreia321]

​@@aaronbryan5095 toyota 3 cylinders are all catching on fire way worse POS

[@kelvinflores5859]

Never had an issue with it, it has 130K miles and NOW AT 130K miles head gasket blown it still stuck in my drive way since they wanna charge me 3k for that 😤😢

[@GodGunsGills]

EVERYONE HERE WITH THIS ISSUE SHOULD FILE A CLAIM WITH HONDA USA SO WE CAN GET A RECALL!!!! AND REPORT TO THE ATTORNEYS GENERAL

[@frankm7707]

These Honda earth dreams engines are turning into a nightmare for owners

[@ppumpkin3282]

This is why you don't buy turbos.

[@GixxerRider1991]

Agreed. Ultimately they end up costing the customer a lot more money than they're worth to maintain and eventually replace. No one needs 200-300 horsepower in a daily driver.

[@chriswheeler5150]

Damn... pull the exaust and coolant hoses you can just take the motor out

[@marklo4416]

i am glad i didn't buy Accord with 1.5L Turbo engine. i heard blown head gasket is common problem.

[@StockCarGuy]

honda gotta do better

[@captainseadog7600]

Wow this is common in 1.5l turbo Hondas … I tought they were good cars … shittt

[@a2zautomasters862]

They’re good cars in general except for those 1.5l issues. lol

[@rjobrien7805]

Shame on Honda for replacing the K series 2.4 with this jacked up lawnmower engine. The Accord is too heavy for this 1.5 so drivers are demanding too much from the motor and Honda skimped on the head gasket and head bolts.

[@mitchhedberg4415]

The whole engine is on the weak side, nothing overbuilt.

[@aaronbryan5095]

​@@mitchhedberg4415 the 1.5T is basically an overworked Honda Fit engine

[@heldercorreia321]

The problem is pessure from emissions standards not honda, they are forced to make engines like this, toyota went down hills as well

[@trollsymctroll5361]

Thank fk I did some research before I got a 1.5 turbo. No thank you.

[@FadyKassar]

I don’t see any effectiveness of these grove to begin with that required them to integrated in the design of this engine other than a future intended failure point to generate repair and service revenue for Honda, shame on them. If they wanted a cooler combustion burning, either lower the boost or add fuel and forget about the EPA numbers. Crazy such a nice engineering masterpiece ruined with this nonsense.

[@WarrenVeras]

yeah, im just taking that L and going to the mechanic... not doing this on my own

[@yournightmare9999]

Today you pay for brand not for reliability

[@robinsantiago2200]

Where's the car covers? Sloppy work. Definitely will scratch up

[@Pepecoin123]

$4000 job If you have no warranty mine aswell buy a new engine cheaper

[@KayLove-p3v]

Hi just a girl here trying to fix my head gaskets can you please label tools thank you 🙏🏻🤎🤎🤎

[@chriswheeler5150]

You don't even know what tools are called. This isn't something that anyone can do. Might want to stick with a professional because you can make your situation alot worse if you do it wrong

[@dustincollins16]

My 2020 accord 1.5t has 121k miles. Yesterday I noticed all the coolant was gone in the coolant reserve bottle. Other than that the radiator is still full to the top when I took the cap off. Iv noticed zero issues with the engines performance yet. But I sure hope that's not a sign of the head gasket starting to go. My car has been maintained perfectly and 95% of those miles are highway driving. I drive 140 miles a day to my job all interstate

[@RemingtonScarborough]

Update?

[@GodGunsGills]

Please file a claim with Honda USA and report to the Attorney General. So we can get a recall

[@dustincollins16]

@@RemingtonScarborough no issues. I filled the reserve bottle halfway full and the level hasn't changed in the last 15000 miles. Still no issues relating to head gasket. Idk perhaps the bottle was low from the factory

[@natedogg8648]

@@dustincollins16I just bought mine with 46k miles on it I bought a extended warranty hope mine last for a long time

[@natedogg8648]

@@dustincollins16I just bought mine with 46k miles I drive 70 miles a day going and coming to work hopefully mines last a long time