How to change headlight in the GMC Terrain in 5 Minutes

[@deloresboseman7477]

My Husband had to change the headlight..and I showed him your KZbin video and he got it change thank you sooo much.

[@Redneckinahat]

Glad it helped. Not hard doing it this way.

[@robertstewart1726]

Your video was spot on. I needed to replace my low beam, watched your video, purchased the replacement bulb and it took me less than 30 minutes to complete. Thank you! Your video is GREAT!

[@Redneckinahat]

Awesome! Thanks for the positive comment.

[@jermpc]

I have a 2014 GMC Terrain I need to change a headlight, and this was by far the most helpful video I found on KZbin. Thanks!

[@Redneckinahat]

Glad you found it helpful. Thanks for watching

[@Domjulio1987]

Thank you so much for the video. I just did this a couple hours ago and I can tell you, the hardest part about this jobs is lining up that cap on the housing because of the lack of space and light. Took me like 20 mins and a few pep talks to get it locked. It was worth the effort though 😩😣😖

[@jenniferl.9692]

Thank you for this video! I changed my bulb in about 15 minutes, and saved a couple hundred bucks. The hardest part for me was pulling the splash shield out from under the fender, but it pops out with a trim tool. Much easier job than I thought it was going to be. My car unfortunately does not have the circular access panel, so this video was incredibly helpful.

[@robertvandaele8361]

Your video was a huge help for me and it saved me some labor fees if I would’ve taken my vehicle to a garage,. I appreciate your graciousness for the help you provide.

[@kabinehoumar7643]

This is complete video . I watched it once and do my own. Thanks for making this for us

[@Redneckinahat]

Thanks and glad it was what you were needing.

[@joesaoud4717]

Out of all videos I have seen this was the best by far. Just removed the cover around the wheel only enough to get my left hand inside and changed the bulb. It was that easy. Thanks

[@Redneckinahat]

Yep didn’t even need to remove the wheel. Glad it helped ya out

[@CA-lk6fd]

Lots of other videos show removing bumper cover, this way is not bad at all. My son wants to upgrade his (16’ Terrain) my wife has an 18’ Acadia, those were really easy, nothing to remove. I knew there had to be an easier way than removing the bumper cover. Like we say at work, “You gotta be smarter than what you’re working with.” Thank you for taking time to post this.😎👍

[@Redneckinahat]

Some years they had a removable cover in front of the wheel. Not sure why they didn’t do that for all years. Glad this helped ya.

[@niktaylor87]

Your video just saved me good amount of money. It was easy and smooth. Thank you so much.❤️

[@sunshine19701989]

Getting ready to do this myself. Thanks for the tutorial! They always say don't touch the bulb so I'm going to wear cheap latex gloves.

[@judsonterry6644]

Cheap latex gloves like hospital gloves are just as bad as using your bare hands. The gloves from the parts store are powder free unlike regular latex gloves. 😊

[@craigmines255]

Great you make it easy for us thanks I save 30 bucks for labor my brother mad😂👍

[@dingodogie]

Great video exactly what I needed. Great job getting your camera in there to see what is going on.

[@stevefromjersey6617]

Great video explaining from start to finish. Thank you!

[@RedDogForge]

Thanks sir :) Geez I sure miss my old 77 pickup lol

[@MultiMarybella]

I changed my cars headlight today it was so easy ..thanks

[@jesseaguilar1152]

THIS HELPED ALOT THANK YOU

[@jimmywilson1388]

Thanks for the video… My kind of redneck… Straight to the point…😂

[@vanessaguzman7671]

Thank you so much for this video sir10/10 you saved me 100 bucks!

[@Redneckinahat]

It’s always good to save money by doing something yourself

[@kenyal7790]

Thank you for posting this video

[@CelebrityDirect]

TIP: On a 2014 Terrain, don't bother trying to pull of the cover in the wheel well. You can try, but probably won't be able to move it enough. There's actually a circular panel you can take off in the wheel well (1 screw holding it), and reach your hand in there. At first glance, it looks like it doesn't access the lights --- but it does. And the bulb wires *will* be long enough to pull straight back and access through that panel. I tried the other way before I discovered that removable access panel 🙂

[@Redneckinahat]

You are correct but if you don’t have the access hole you need to pull out fender splash guard to get to headlight. Thanks for the reminder

[@coryszczepkowski6629]

I'm going to be changing both bulbs today so I'll look for that, thanks.

[@corazonbeso]

I have a 2016, and there’s no circular panel. On either side. I looked.

[@arthurkahl6476]

It looked easy. First I couldn't get the fender splash too much out of the way. I could just barely get my hand in. I had to feel my way in. I got the round cover off easy. The bulb came right out. It took an hour to get the new bulb in. Then it took two more hours to get the round cover back on. But I got it. 3 hours. I think it's better from the top as another video said. You can see what you are doing.

[@JinChen-u3y]

Your expertise and passion for automotive parts have captured our attention, and we believe your influence would make a significant impact on our latest product unveiling. We are thrilled to introduce our new, customized Full LED headlight specifically designed for 2010-2015 GMC Terrain trucks. This product is the first of its kind on the market and boasts a suite of advanced features including LED high & low beam that is 500% brighter than traditional headlights. Additional key features include LED day running lights and sequential turn signals - features we believe will captivate and resonate with your audience. Seeing as you own this truck, we would be honored if you could help us by installing our new product on one of your trucks. We are excited to hear your thoughts on its fit, its unique features, and overall performance. We'd also greatly appreciate it if you could produce a video to document your experience with the product. As a gesture of our gratitude, we would love to gift you the Full LED headlight after the installation. We believe your feedback and the exposure gained through your YT channel would greatly benefit us, while offering engaging and relevant content for your followers. We look forward to hearing from you and hope you'll consider this exciting opportunity. Please feel free to reach out if you require any additional information.

[@Badoe36]

Thanks for the video, gunna tackle this tmr

[@Redneckinahat]

Let us know how the job went….

[@anabellegonzalez903]

Thanks for your Video!!

[@Ninjamlm]

I still can't believe how they engineer stuff these days. It's just so that you go to the dealer and they can rip you off on simple jobs and try to upsell you on more expensive jobs.

[@mikeferretti7422]

Does the terrain not allow for led bulbs? I went to swap with led but they are too long so the dust cover won't fit back on.

[@judsonterry6644]

No because they are compliant with the laws. It's actually illegal to use led headlights they are only allowed for offload use only.

[@carlosMartinez-tm8sq]

Thank you for your help

[@jeramiewaters4529]

Thanks this helped me

[@agogolafitness9467]

Thanks so much I did it 😂

[@pologrj]

Thank you sir 🙏 💚🙏

[@TimBecerra]

You can also do it from the top on driver side, just remove battery and you can access the bulbs

[@Redneckinahat]

Oh you have done that on the Terrain? And was it a 5 min job?

[@Austin-me1fc]

Ahhh so useful

[@JinChen-u3y]

Hi，I have a new LED headlight assembly for 10-15 GMC Terrain, do you have interest to help test it? If it works I'd like to give it to you.

[@joeborovina4769]

thank you

[@dougsheridan4732]

Easier than taking the whole assembly out

[@will2-b150]

Do you access the high beams using the same process?

[@Redneckinahat]

Probably easiest to change both bulbs this way.

[@dennisbassett1835]

Uninstall the light a** backwards