How to change rear wheel bearing / rear hub bearing on VW CADDY 3 (2KB) [TUTORIAL AUTODOC]

How to change rear wheel bearing / rear hub bearing / rear wheel bearing kit on VW CADDY 3 (2KB) 1.4 Estate 03.2004-05.2015 [TUTORIAL AUTODOC]
Wheel bearing on VW Scirocco III (137, 138) (05.2008-present) / VW Touran I (1T1, 1T2) (02.2003-05.2010) / VW Touran I (1T3) (05.2010-05.2015) / VW Jetta V (1K) (08.2005-10.2010) / VW Eos (1F) (03.2006-08.2015) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce wheel bearing: SKF, MAPCO, STARK, FAG, KAMOKA.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: goo.gl/bQCJwp
Wheel bearing: goo.gl/4uQ33x
Wheel bearing for VW CADDY 3: goo.gl/vygDSt
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️The tools you need to replace rear wheel bearing:
- Torx bit T30
- HEX bit No.H19
- 3-Arm Gear Puller
- flat screwdriver
- flat chisel
- hammer
- round nose pliers
- ratchet wrench
- drive socket No. 16
- torque wrench
- wheel impact socket No.17
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- multipurpose grease
- rubber mallet
- crow bar
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW CADDY 3 car repair tutorial - • VW CADDY 3 car repair ...
► How to replace rear stabilizer supports on VW CADDY 3 - • How to change Rear sta...
► How to replace rear shock absorbers on VW CADDY 3 - • How to change rear sho...
Mobile Shop: m.autodoc.co.uk
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZbin: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@autodocuk]

⚠ Attention! This video contains a mistake: 4:24 - the tightening torque is 180 Nm, not 200 Nm. 5:44 - the tightening torque is 90 Nm, not 80 Nm. We're sorry for the inconvenience 🙇‍♂

[@autodocuk]

🛠️The tools you need to replace rear wheel bearing: - Torx bit T30 - HEX bit No.H19 - 3-Arm Gear Puller - flat screwdriver - flat chisel - hammer - round nose pliers - ratchet wrench - drive socket No. 16 - torque wrench - wheel impact socket No.17 - wire brush - WD-40 spray - brake cleaner - copper grease - multipurpose grease - rubber mallet - crow bar - wheel chock

[@sasaokic7058]

media0.giphy.com/media/vcKEsYOdjoCeJRpn95/200w.gif?cid=87bb43335c288d535a712e3355576bcd

[@brianbeth177]

Brain looking plant

[@muhamedbunjaku8007]

Good job 🥽🗜🔧🛠 🙂

[@autodocuk]

Thank you for your feedback! We are happy that you like our work. Watch out for the updates on our channel. Best regards, Autodoc.

[@taha.al-dulaimi1461]

Hyvä työ🏆

[@darrensteele7880]

3:14 is H19

[@autodocuk]

We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.

[@garydavis4228]

Clockwise to take off the big Central bolt?

[@autodocuk]

You can find this information in the technical documentation for car repair.

[@HAZYFALKIRK]

Was there a wheel spacer on the hub? at2.25

[@autodocuk]

Yes, there was a wheel spacer on the hub.

[@sasaokic7058]

Врхунски Видео ! 😁😁😁😁😁😁😁😁😂😂😁😀😀😀😀😀😀😀😀😀😀😀😀😀😀☺☺☺☺☺☺☺☺☺☺☺

[@jaystevens8811]

Is front wheel different to back wheel?

[@autodocuk]

Thank you for the feedback/comment! In this particular case, the replacement for the front wheels will be completely different to the rear wheels. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@simsimmer250]

Did you have to use the puller on remains of a Brocken bearing? 3:43 ? Thanks