How to change the oil on a Honda Goldwing. It's easy!!!

Рет қаралды 17,881

Жыл бұрын

It's easy, watch the video and learn how to change the oil yourself and save money. Use 100% synthetic oil and your Goldwing can last a lifetime.
The channel will receive a small commission, but you pay no more than regular amazon prices.
Oil Filter Socket Wrench:
amzn.to/49AWLqO
Quad Lock:
amzn.to/3PUGfc8
Quad Lock iphone 14 Pro Case:
amzn.to/48U3WtH
Quad Lock Other Phone Cases:
amzn.to/48U4cc9
Link to Amazon oil below:
amzn.to/3IXhYzl
Oil Pans:
amzn.to/45PscvF
Goldwing Accessory links
Oil and Filters:
amzn.to/3QuYHtS
Parkvision MC GPS Carplay/Android Auto:
amzn.to/3YxodQZ
Belly Pan/ Road Warrior Shield:
amzn.to/446dqhO
Phone Holder:
amzn.to/3OSgzgY
Luggage Rack:
amzn.to/45qyPU4
SoftLuggage:
amzn.to/3qAkbe6
Windshield:
amzn.to/3s97CXX
Fog Lights:
amzn.to/3OQZgwG
Highway Pegs:
amzn.to/3OTqRO7
Sena/Cardo Audio:
amzn.to/3YxoK5r
amzn.to/3s98pbn
Kick Stand Plate:
amzn.to/3Qz9Hq0
Cup Holder:
amzn.to/3KB9YF8
Go Pro:
amzn.to/47t42HZ
DJIActionCam:
amzn.to/3qt26yF
Helmet:
amzn.to/3QBr35J
Gloves:
amzn.to/45366Fj
Boots:
amzn.to/440daRL
Guardian Angel Bell:
amzn.to/3KBqKnK

Пікірлер: 47

@dsg1654 Жыл бұрын

Nice video. Just a few things to add. 1) The drain bolt and oil filter should be torqued to Honda specs. The oil filter torque spec actually seems quite high at 19 lb-ft. The drain plug is 25 lb-ft. 2) You didn't say if you saw the oil level drop after your test ride. I assume it did a little. After filling with new oil, I would run for 3 minutes, let sit for 3 minutes, and check the level (and adjust if necessary) before putting the plastic side cover back on. Last, people do call those "crush washers", but they are just either aluminum or copper flat washers. Real crush washers are not flat and have curved sides that flatten out when you "crush" them during tightening. And, you can easily change the flat washers every other time. The soft metal will reform the seal with the proper torque. Just nit picking here, so thanks for the nice video.

@douglasradowick508 8 ай бұрын

D2, great videography! Every step was shown full view- nothing being blocked out, top notch doing!👍🏍️😎 Doug

@d2destinations106 8 ай бұрын

Thank you, glad you enjoyed it!

@rd4k04 7 ай бұрын

I was using synthetic mobile 1 10w-40 racing 4t in my 04 and started having issues with the starter not turning engine during cold weather. It would just free spin. Now I use the honda recommended HP4 10W-40. I was also getting a lot of oil foaming in the airbox and crankcase ventilation tubes. HP4 specifically mentions anti-foaming. I think overall it's better for this bike despite being a synthetic-blend

@matthewjohnson0627 Жыл бұрын

You're supposed to have the bike on the side stand for draining oil, so it all slopes to the left where the plug is. Not the end of the world, but you won't get as much old oil out if you have it on the center stand. Also, I've used Seafoam in my oil for the last two changes. I haven't seen a problem with my clutch, and with as many miles as I've got on the bike, it's probably good that I'm cleaning out the crankcase.

@soujrnr 10 ай бұрын

Seafoam is incredible stuff! I use it in my cars, my tractor, and my motorcycles.

@soujrnr 10 ай бұрын

I haven't read all the comments, but what I did with my oil collection container like that is put a piece of 1/4" hardware cloth in it to catch the oil pan bolt if I drop it. Problem solved. Also, I wouldn't use any tool to tighten a new oil filter. Finger tight is very sufficient. I also use latex gloves when I'm working with fluids. It makes clean-up a lot easier.

@dimasbeltran866 6 ай бұрын

Awesome, thank you for sharing that ! 👍

@2woofs784 Жыл бұрын

Very helpful video for me as I am a new owner of a 2006 Gold Wing Gl 1800

@d2destinations106 11 ай бұрын

Glad it helped.

@alp3781 Жыл бұрын

I own 2020 DCT Tour. I use a T. Wrench on all drain bolts (22 f/lb) with fresh crush washers all the time and I do 19 on the oil filter. After 3 years of owning and many oil changes, zero issues, so far. If you follow the manual, you should be fine. You will not break the bolts or damage anything. I do recommend to use a good oil filter socket !!! Also, to all DCT owners, use the regular GN4 10-30 Honda oil. I don't put anything else....period. A large Honda dealer, head mechanic told me just that.

@isaacsharpsr.8856 3 ай бұрын

Great video. Thanks for the great tutorial

@d2destinations106 3 ай бұрын

Glad you enjoyed it!

@user-ft3cv9pc4l Жыл бұрын

great video getting my goldwing 1800 2008 in two days thanks for video

@k.f.4617 14 күн бұрын

Great video…can’t thank you enough! 👍🏻😄

@d2destinations106 14 күн бұрын

Glad you liked it! Thank you for watching.

@beverlyhurd8556 Жыл бұрын

I have been using Rotella T6 5W-40 for the last 100,000+ miles. Change it and the filter ever 10K. Sent in a sample to Blackstone Laboratories a year or two ago and they said that all is well. Even said that if I wanted to go longer than 10,000 miles between changes that I could. Good to know, but every 10 makes it easy to remember.

@soujrnr 10 ай бұрын

I have a Suzuki Boulevard C90T in addition to my 2004 Wing, and I also use Rotella T6. Always have, always will. It's great stuff!!

@bobbybirch6983 5 ай бұрын

Great Job. Nice and easy. Great smooth instructions. Thank you.

@d2destinations106 5 ай бұрын

You're welcome!

@flashgordon6238 Жыл бұрын

Three comments: 1. I hook a ratchet strap from the center stand to the right crash bar anytime I'm under the bike. 2. Amazon sells a flexible oil plug removal tool with a magnet. No more dropped drain plugs and oil covered hand/fingers. 3. Stopped using newspaper and went to oil absorbent pads.

@340rps 6 ай бұрын

For 15 years never mind changing the crush washer, I never used one at all and never a drip. I'm not recommending it but I just kept forgetting to get a new one.

@leonbeck6254 Жыл бұрын

I also have an 2002. Been all over the USA😁. Use mobil one bike oil. Seems to run fine. Great video. Thank you. Ride far and safe🎅🏼🏍🇺🇸

@wingandhog Жыл бұрын

I use Amsoil full syn as well. Both in my Harley and my GoldWing. Good stuff. I change my Harley oil every 3k. My Wing every 4 to 5k. I live in the Southwest where it’s quite dusty.

@j.e.g.4624 Жыл бұрын

Very nice.

@zugmeister314 Жыл бұрын

I buy my oil in those 1 gallon bottles, never throw them out! Catch your oil in a pan like that one but then (carefully) dump your used oil into an empty oil bottle and put it in a Rubbermaid tub for transportation. Just hand the whole thing in to the auto parts store. I’ve found the pan can get dirty and my pan cap doesn’t seal too well while those bottles work great as that’s what they’re designed for.

@goldwingconepatterns2565 Жыл бұрын

I like the drain pan. Do you need to unscrew the centre plug when draining and then tighten it up to keep the fluid retained? Haven't seen those pans myself.

@elmundomifrontera286 8 ай бұрын

Hello, excellent video, I have a Honda Goldwing 1800cc 2006 35 k, what do you recommend and where can I buy everything and the device to remove the filter, thank you

@d2destinations106 8 ай бұрын

Thank you for watching! There are links to oil and accessories in the description. I bought the oil filter tool from my local Honda shop.

@d2destinations106 8 ай бұрын

Added link in the description for the oil filter socket wrench.

@jimeckenrode1271 Жыл бұрын

there is no need to replace the crush washer every time you change oil

@CharlieGooch-um7tq Ай бұрын

Injection replacement

@michaelboykin8593 Жыл бұрын

can you use a oil additive like prolong ? I use that in all my cars

@wingandhog Жыл бұрын

If it’s not required or recommended in the service manual than it’s not needed IMO.

@JohnHall-pv1re 3 ай бұрын

I really hope this oil is good to use in a 1985 GL1200. if you read this please respond. Im getting oil today and really dont want to damage my bike.

@d2destinations106 3 ай бұрын

Not sure on the GL1200, please consult a Honda dealer or mechanic.

@jakedoe26 Жыл бұрын

What back ready do you have on your Goldwing?

@robertmethia7080 Жыл бұрын

dont need full syn i have a 2005 and honda says gn3 is all you need

@aaronyork6173 Жыл бұрын

Are you still using Amsoil? If so how do you like it compared to just regular oil?

@aaronyork6173 Жыл бұрын

@d2destinations106 ok thanks so much

@glennbreeden8598 Жыл бұрын

Would someone film the dipstick with a close up view? Where can I find one of those crushable washers? There’s no Honda dealer anywhere near me.

@soujrnr 10 ай бұрын

Just use an aluminum washer. Aluminum is soft, as is copper. Torque it correctly and it'll form fit. I haven't had a problem in more years than I can remember.