How to clean a carburetor - Craftsman / Troy-Bilt / MTD Snow Blower

How to clean a carburetor - Craftsman / Troy-Bilt / MTD Snow Blower
The Small Engine Repair Guy
Check out my other videos on my channel. LIKE, COMMENT, & SUBSCRIBE!
Thank you for watching!
Follow me on social media:
Facebook- / thesmallenginerepairguy
Instagram- / thesmallenginerepairguy

[@bobjann]

Excellent photography

[@TheBrentrandall]

Great job on the camera work. I'm surprised you could get such a good view while cleaning the jets. Thanks for the vid.

[@thesmallenginerepairguy]

Thanks for watching!

[@davidmorrison7424]

I have a 2004 Craftsman 8HP snowblower with a Briggs engine and haven’t had any issues. I run it out of gas every year for summer storage and have only removed the carb bowl and jet once for cleaning.

[@thesmallenginerepairguy]

That's great! These MTD engines are quick to gum up for some reason.

[@SaleenJ]

Thank you for this it helped and saved me frustration.

[@thesmallenginerepairguy]

You're welcome! Thanks for watching!

[@ns5545]

Briefly thought about tackling this project and thanks to your video I will not! Nice work though. I’d just assume buy a new blower lol.

[@thesmallenginerepairguy]

For about $30, you can buy the stuff I'm using to fix it. Way cheaper than a new machine!

[@herkyhawk2003]

When i turn my choke to full left it wants to bog down....only been doing it for 15 years since the day i bought it LOL...any ideas? I mean is starts and does its job...i just need to turn the throttle back a little.

[@thesmallenginerepairguy]

The throttle control is the lever with the rabbit and turtle. The choke is the round knob. Sounds like a cleaning might be in your future to make that thing sing.

[@herkyhawk2003]

I did say that backwards LOL....TY@@thesmallenginerepairguy

[@thesmallenginerepairguy]

I hope this video helps someone tackle a no start issue with their MTD engine. Stick with it, don't give up. Good luck!!!

[@stevesmith6058]

When assembling the carburetor bowl not you should use an impact use a ratchet for the bowl nut U will strip it

[@thesmallenginerepairguy]

@stevesmith6058 I agree with you for the average person. Good point. I know my torque on the 1/4 driver and it's fine. Thanks for the tip!

[@bmboldt]

I have this model. Mine runs but once I engage the auger and or the drive it shuts down. Its too cold to work on it right now. Gonna try to run some seafoam through it and if that doesn't help then maybe try this.

[@thesmallenginerepairguy]

Make sure the auger can spin and that the impeller is not siezed. If it's siezed then that could stop the engine once it's engaged.

[@bmboldt]

​@@thesmallenginerepairguyIt got to the point where it would start but only run in full choke. I cleaned the carb and it is now working. It was pretty clean but that tiny hole in the black plug on top was clogged. Not sure why that is such a big deal but it was.

[@martinmoran3883]

I' surprised this particular installation has NO air filter. Not even a basic foam pad. That would help to prevent ingestion of particulates into the system

[@thesmallenginerepairguy]

Good question. I think the reason is these machines are not ran in dusty conditions like lawn mowers and most other power equipment.