How to clean a Shark duoclean vacuum cleaner and restore suction

How to clean a Shark DuoClean vacuum cleaner to restore suction. This step by step guide shows you how to improve the suction of a Shark vacuum cleaner by cleaning the bin, the filters and the cleaning head. The model used is the Shark DuoClean ICZ160UKT cordless vacuum cleaner with anti hair wrap technology.
The small nylon brush used in this video can be found here: amzn.to/3c7gntd
Car detailing brushes can be found here: amzn.to/3O32rxM
Full details of the Shark ICZ160UK can be found here: amzn.to/3uEOz62
As an amazon associate, I earn a commission from qualifying purchases but the price you pay is the same.
#sharkduoclean
#sharkvacuum
#shark
#vacuumcleaner
#vacuumcleaning
#cleanshark

[@duncanwitt4944]

Clear down to earth and very informative. Thanks very much!

[@bigtedshome]

Thanks Duncan. I'm glad you found the video helpful 🙂

[@owid]

You can also remove little wheels if you push them a bit. It's easier to clean when you remove them.

[@bigtedshome]

Thanks Igor 👍

[@shereeg404]

Many thanks for your excellent video! The best I have ever seen and learned so much helpful information. Now, I have no excuses not to clean the beast.

[@bigtedshome]

Thanks for the great feedback Sheree. There are some good tips on cleaning the small wheels in the comments that you might find useful.

[@HARDMANV1]

I know I’m getting old now 😂😂 this video was brilliant my vacuum is so clean . Cheers I really enjoyed it 🇬🇧👍

[@bigtedshome]

😂 thanks for the great feedback

[@m8dochnix427]

Super Video! Endlich mal jemand, der richtig gut und ausführlich erklärt, wie das Reinigen des Sharks funktioniert. 👍👍👍 Auspacken und saugen kann ja wohl wirklich jeder, dazu brauche ich echt kein Video.

[@aharonsaadya2012]

My whole life story. Thank you for the help, you have aided the planet Galaxakon in it's years of famine. Thanks y'all and, as the humans say, peace out - the make believe aliens of Galaxakon 👽

[@bigtedshome]

I'm so happy to have been able to help in your planet's hour of need 🙂

[@elainem8326]

Top tips, thank you! Can't believe how much gunk came out!!!

[@bigtedshome]

Thanks Elaine 👍

[@brandonheaber50]

10/10 video 👍

[@bigtedshome]

Thanks for the great feedback 👍

[@pjfreeman4789]

Thank you so much!!

[@bigtedshome]

Thanks! I'm glad you found the video helpful 🙂

[@Shaimaa.66]

I proud of you sir 🤗🤗

[@bigtedshome]

Thanks Shaimaa 🙂

[@kimberlysmiley5071]

Thanks!!!!

[@bigtedshome]

Thank you, I'm glad you found it helpful 🙂

[@RuneRelic]

Those wheels. Get a flat blade underneath in the gap (or at the axles sides) and lever. They are clipped in at the axle and pop out. Then just pull the dust/hairs off the axles ends. Push back in until they clip. 👍

[@bigtedshome]

Great tip. Thanks 👍

[@MarquisGunderson-nx3zr]

This thing has crazy power

[@bigtedshome]

I prefer my Shark compared to my old Dyson 😁

[@kaystwinsrock]

This video is brilliant, I have just been gifted one of these vacuums, and it needs a good clean. the roller needs , how would you do that? can you use detergents or just rinse with water.

[@bigtedshome]

I would be tempted to use a mild detergent like fairy liquid in warm water.

[@user-kf7cj2jg1e]

Those little rollers underneath 'flick out' to clean, you do not have to use a sharp tool to remove hair off the axle

[@bigtedshome]

Thanks Linda 👍

[@ItsRustyYT]

Yes sir.

[@LouBelle468]

Is there any way to remove the larger roller? M plastic thing is dark and dirty but can’t get to it to clean it. Very annoying

[@bigtedshome]

I don't think that there is an easy way to remove the brush roll. I'm not at home at the moment but will have a look when I get back and let you know if I find a solution 🤞

[@Breath4peace]

Mine too! Struggling to clean inside of the plastic cover. I would like to know how to get an access to that dirt.

[@paalston]

Yep, crap design that it has a clear window, obviously so you can see how well it works etc but you can't clean the damn thing!!! Pathetic design.

[@jakirhussain4727]

​@Chic Chic get a wet wipe and roll it into a sausage. Place it on the roller and start rolling the roller. U will see the wipe go through and start cleaning the clear plastic

[@mahaal-taee5377]

How often do you recommend cleaning the shark?

[@bigtedshome]

It depends how much you use it. I normally clean the foam filter roughly every 6 weeks and then do a full clean 2 or 3 times a year.

[@ABadHairDay]

Is it bad that I used soapy water to clean the heppa filter?

[@bigtedshome]

This is the best study I can find which actually measures the effect of cleaning hepa filters smartairfilters.com/en/blog/how-to-clean-wash-hepa-filter/ It looks like cleaning with water reduces the effectiveness of a hepa filter by about 50%

[@lukelee-sang3594]

I saw a comment which is was i wanted to know and you said youd look into it but no reply after? So basically the bigger rolling brush with plastic flaps on, did you manage to find out if theres a safe way to take apart and clean ? Please and thank you

[@bigtedshome]

No, I still haven't figured it out. Please let me know if you have any success

[@ABadHairDay]

🙏🏽

[@aprilkoester202]

What's radiator? You said "If it's winter put it in the radiator ir doesn't matter "

[@bigtedshome]

Hi April, A radiator is a central heating radiator. Most homes in the UK have gas central heating which heats and pumps hot water around a circuit of radiators which transfer the heat energy to each room. A radiator is basically a hollow metal panel full of hot water. In the video I suggest putting the damp filter on (not in ) one of these radiators to help it dry more quickly if it is cold and/or wet outside. I hope this helps.

[@davidhale8034]

Those little jockey wheels are an absolute bugger ........ Do you know if they can be popped out and back in again ...... I started to prise one out and the inside prong looked like it would come out .... but then i got cold feet in case i snapped something ... So i stopped.

[@bigtedshome]

I don't think they do come out easily. I'll have a look tomorrow

[@oobern00b]

You can just pop them out. I discovered so only today. Makes it much easier to clean hah. Prise each side until they come out and then just push them back in again once cleaned.

[@bigtedshome]

@Ian Webster That's great Ian. Thanks 👍

[@marambula]

@@bigtedshome They pop out (but it's possible a few models don't). it's Worth a Pry

[@bigtedshome]

@@marambula It's definitely worth a try. It worked for me 🙂

[@ducklops]

hairy machine? that won’t keep the gaff clean!

[@bigtedshome]

It will now that it's clean 🙂