HOW TO CONFIGURE AND WIRE HONEYWELL HOME THERMOSTAT IN-DEPTH DIY. HVAC PRO AND BEGINNERS

[@sherrydeluna9514]

I can't even thank you enough for this video. We recently moved and had a very old fashioned thermostat at our last house. At the new house, we have this exact thermostat and some how I got it on Celsius last night and could not fix it. I was about to call an electrician when I came upon your video. I had it changed back to Fahrenheit in seconds! Very informative video!

[@pathomefinder]

Anytime I need an update or refresher I always come to this guy. Great Job!!!!

[@D2DNYAC]

Dope thanks 💪💪

[@reynacortez3931]

Thank you! I had no idea it had a menu to change to heating pump. I paid someone to come and fix my unit since it was only blowing cold air and he told me that I had purchased the wrong thermostat. That this thermostat was for electric heaters and mine works with gas. That was a waste of money. A million thanks to your video. God bless! I get to keep my thermostat now 😊

[@D2DNYAC]

Thank you for stopping by , don’t forget to like, share and subscribe

[@fortwonti]

Thanks so much! it only took me 12 hrs. to install mine. I had no Idea I had to change to heat pump in the menu. I must have tried 400 wiring combinations and could not get the AC to kick on.

[@TheJoshua12104]

Me too!! Haha I literally placed the wires exactly how it came off the other one and it was blowing hot air. I spent the same amount of time until I gave up. The Honeywell people don’t even answer the damn customer service. I saw this video but I looked over and didn’t think I would find the answer until I looked at everything all over again.

[@joelpele100]

Did ull find out how to I’m having the save problem when I set it on cool it blows hot air HELP PLZ

[@paukhai1977]

Thank you very much for this vedio.It was very helpful for my Honeywell thermostat set-up.

[@D2DNYAC]

Thank you for stopping by

[@ellenkh4422]

Thank you, this was a big help. I accidentally changed a setting and the manual I have is useless.

[@D2DNYAC]

Thanks for stopping by

[@lesabeaty7415]

Same here. This video was a lifesaver for me. THANK YOU so much!

[@Figs3DP]

Thank you, this video made it very easy to setup.

[@D2DNYAC]

Thanks for stopping by

[@Charlie_Brown_009]

I throw away my menu and my mum is going to kick my ass when she gets home. You save my life! Thank you!

[@D2DNYAC]

😂 thanks for watching

[@RobertAziz26]

Great job.

[@mrstutz3333]

This is great but how am i supposed to know what types of systems i have? I don't know the difference between all the heating and cooling systems are. I just want the thermostat to heat or cool automatically.

[@globaltecnicianworldsbest3031]

Watch this and setup accordingly

[@claddagh1000]

All home ownership should know 🤣

[@ronie1337]

Great Video. Info only: after setting the #300 auto-changeover be sure to set the "mode" to AUTO. Something I forgot to do.

[@D2DNYAC]

Thanks for watching

[@RocioHernandezGonzalez]

Thank you very much for your explanation, it helps me too much 🎉

[@D2DNYAC]

You are welcome!

[@elizabethr3137]

This was super helpful!!! Thanks !

[@jermain716]

Good job

[@EnidR365]

Great video

[@D2DNYAC]

Thanks for watching

[@aditisharma1273]

Hey, I live in alberta, Canada. It’s getting cold in here. Should i follow your’s thermostat or manual’s default ? Please help

[@D2DNYAC]

What are you trying to do?

[@aditisharma1273]

@@D2DNYAC I was trying to turn the heat off and i pressed several buttons and changed all the settings by mistake. Now i don’t know what was the default one.

[@4.7m_views]

Hi why is this important? What will happen if I skip this setup? Especially since my heater is already working.

[@D2DNYAC]

This is to customize the thermostat to best match the system you have

[@emmakrause1049]

doing a good job & like this

[@D2DNYAC]

Thank you for stopping by

[@Massimono]

How long does it take to change room temperature on the display? Mine hasn’t changed yet and it’s been an hour

[@rachelvf81]

You saved me with this video thank you so so much!!!

[@D2DNYAC]

Thanks for watching

[@marandamcneil4550]

How can I put a lock on this? Like, so it’s locked and the temp cannot be changed??

[@D2DNYAC]

I don't believe this thermostat comes with that option

[@irishstude]

I have 4 wires. I have the T3 model, system gets to temp but won’t shut off. Do I need to jumper the R and RC terminals together?

[@D2DNYAC]

How many degrees pass temperature does it go?

[@JudyAponte]

I reset everything and it’s still not throwing out cold air n I live in fl it’s throwing very very light air like no pressure

[@D2DNYAC]

You should consider calling a professional, however perhaps your Air filters is clogged!

[@toob247]

Perfect video instructions. Thank you.

[@toddrhine7648]

Really liked your video here. Hoping you can give me some input for my case.I have a older Single Stage, Standard Efficiently furnace with a central A/C unit outside on the ground. I just want to use my furnace strictly for Heating my home and nothing to do with the A/C unit. I have 4 wires coming out from the wall. Red, Green, White & Yellow. How would I have to wire/program with my 4 wires then? You had yours set for Auto, does that have to do with using a Central Air unit or? Thx so much for your time & knowledge on my situation here.

[@afrailick]

Thanks, this visual really helped

[@Will.Rondo9]

I don’t have w2 I only have 5 wires I don’t have brown . Will it still be same setup ?

[@D2DNYAC]

Okay if you have no wire w2 set 221 to 1 and save

[@tyerinem]

Thank you. I followed your steps, but it seems like it's not working. We have electric everything. Hot water heater, HVAC It seems it's in reverse. The Heat feels like the A/C and the cool feels like the heat. Help!!! I followed your instructions

[@D2DNYAC]

Change the settings in the configuration menu for heat pump

[@tyerinem]

@@D2DNYAC heat pump? The heat is working, I guess I had to give it some time, but it won't cut off. I have to cut it off. It's on auto fan.

[@tyerinem]

@D2DNYAC the temp in the house read 77, the setting was at 75. It had to push the temp down to 70, then it cut off

[@tyerinem]

@@D2DNYAC and we just have a unit outside. Nothing that looks like a heat pump

[@Hmath555]

Do I turn off or leave the heat on? I feel a little confused.

[@D2DNYAC]

What are you trying to do?

[@raymondnorton7515]

Model rth5160d1003 it used to say heat, now when i go in mode only selections are cool or off-its like it skips over where it should say heat

[@D2DNYAC]

I think that is because in the setup menu cool only was selected

[@raymondnorton7515]

@@D2DNYAC how would i change that when only selection is cool or off? much appreciated

[@raymondnorton7515]

@@D2DNYAC got it !!

[@Level-333]

What’s the difference between standard furnace and a high efficiency one? How does this affect the way the system heats?

[@D2DNYAC]

From a visual point of view the high efficiency furnace exhaust gas pipes is usually PVC, because these gases are cooler than that of a standard furnace hence higher efficiency

[@lukev539]

Mine isn’t turning up but will turn down the air?

[@elieteoliveira-janus2416]

my thermostat is showing the house temperature high while the house is cold. How can I change?

[@D2DNYAC]

In the configuration menu you can offset the temperature reading sensed by the thermostat up or down by 4 degrees hence you should lower it a few degrees see how it works

[@CardBoardBoxPro]

anyway top set the differential on this?

[@D2DNYAC]

?

[@simonagonzalez3325]

To turn heat on what temp do we set it at? I put new batteries, fan is on auto, & heat is set at 76 but temp is showing 67° in the house. Don't hear it turn on. It's 35° outside right now. I'm in south Texas

[@D2DNYAC]

If your system/HVAC equipment has heating operation then in this case the thermostat is set correctly for heat and it may not be the issue, problem may be with HVAC equipment, call a pro.

[@simonagonzalez3325]

@@D2DNYAC Just got a new AC unit last month. Both. The one outside& the one in attic

[@blackmacgyver9965]

Whatended up being the problem?

[@simonagonzalez3325]

@@blackmacgyver9965 We freezed our butts off during the winter storm we had. We need to test it out to see if heater will start working if not I'll need to call AC guy to fix it before the next winter storm we r supposedly going to get. We aren't used to such low/freezing temps in south Tx.

[@toddrhine7648]

@@simonagonzalez3325 I'm in the same boat as you for the past 2wks here. Freezing our butts off as HVAC guys are guessing what the actual problem is here. Still to this day, trial and error. So what was the actual problem with yours that they had to fix or ?

[@robhoskins2396]

any idea if the low temp limit can be changed? wont let me set heat lower than 40 degF

[@D2DNYAC]

I believe that’s the lowest setting available!

[@kareliajose]

Thank you!!🙏

[@D2DNYAC]

Thanks for watching

[@sheidazakeri9320]

I got it last year, but after 5 months, it started to empty the battery in a day. Now, each time I use new batteries, it takes only 4 hours to get empty. Can you please tell me how to solve this issue? When I turn it off, I have to take out batteries 😢

[@D2DNYAC]

Replace the thermostat or possibly get the C. wire connected

[@ABCJKE]

Thanks for sharing and doing these videos. Liked it all. Maybe I can help you and others with something. My experience with heat pumps has been that the mode of operation (energizing the reversing valve) is determined by the manufacture of the heat pump. So if you were to have a Rheem in Delaware or Texas would be same mode. If you have Carrier for those same locations would be opposite mode of operation. Thanks

[@patricewilliams2998]

Where can I find how to make sure my wires are correct, I did all that but still no air or heat coming on?

[@D2DNYAC]

What are you doing?

[@patricewilliams2998]

@@D2DNYAC I was installing the exact same thermostat. I ended up calling in a specialist. He informed me I installed correctly the issue had to do with incorrect/ wired wiring from the original installation.

[@Tiger_Gaming9095YT]

Just wondering if it mess up your settings format reset on your Honeywell t4 or T5 pro series

[@D2DNYAC]

Yes it will revert or go back to out the box settings if you do a factory reset

[@Tiger_Gaming9095YT]

@@D2DNYAC what happened of it do & want to know what is the website for the ISU programming manual

[@Tiger_Gaming9095YT]

@@D2DNYAC I did something wrong on the thermostat I reset the whole thing accident

[@Tiger_Gaming9095YT]

I was trying to figure out how to unlock it code because my brother locked it I didn't know the code was

[@Tiger_Gaming9095YT]

Because I want to put the issue program me back to normal settings the person is the thermostat I messed up his settings and reset the whole thing and accident

[@TheChosenJuan916]

So how you put the heater on it’s still cold

[@D2DNYAC]

@the chosen Juan 😂 press button /set mode to heat and then + up / increase temperatures as high as the thermostat can go or to what temperature you want

[@chesslover8829]

Great video! Thanks!

[@D2DNYAC]

Thank you for stopping by

[@chesslover8829]

@@D2DNYAC I just finished installing the Honeywell thermostat. Thanks to you, it's working perfectly.

[@Tiger_Gaming9095YT]

Do you know to get a book manual on a website I don't know Honeywell manual on a website I can set the thermostat because I lost the book manual on the ISU setting if you know it what the website easy for me

[@D2DNYAC]

Do you have the T4 thermostat?

[@Tiger_Gaming9095YT]

@@D2DNYAC I think it I don't know it t4 or t5

[@Tiger_Gaming9095YT]

Why my my gas pipe metal is shaking and making loud noise on my AC at my house in my bathroom

[@D2DNYAC]

You mean steam radiator pipes??

[@Tiger_Gaming9095YT]

@@D2DNYAC yes I hate that noise I cannot fix that noise

[@irinasv129]

Thank you 👍!!!!

[@tonyhinson3098]

What if you only have a 2 wire setup 1 white wire and 1red wire

[@D2DNYAC]

Heating system only most likely R and W would be the terminals

[@dolcegabbs6337]

My unit is off but the fan keeps running . How do I turn off the fan?

[@D2DNYAC]

Set fan to auto on thermostat!

[@dolcegabbs6337]

@@D2DNYAC it is on auto .

[@D2DNYAC]

@Dolce Gabbs pull the thermostat off the base see if fan stops, if no check AC unit it’s not the thermostat, if yes re the re install and place thermostat in off mode while fan set to auto see if fan still runs thermostat most likely is faulty, switch fan to on wait and listen 👂 for a click then back to auto listen 👂 for a click, should happen within 10 seconds .

[@gustavsmedegard4127]

What is 2 stages of cooling?

[@D2DNYAC]

When your ac system have two compressors so Y1 turn on compressor #1 and Y2 turn on compressor #2 assuming you know what the compressor is!

[@robertdigby4504]

This dude loves the sound of his voice turned a two minute video into 4 plus

[@D2DNYAC]

Me too I think 🤔 he does 😂😂

[@TheJoshua12104]

Thank you for this video, I spent I was trying to figure it out and I thought my wiring was wrong. I had to program it first through the directions

[@ElaineJones-lj6fv]

I see how to set to Auto, but how do you set the Cool and Heat temperatures. A technician will cost $69 to answer this one questions.

[@D2DNYAC]

Select cool or heat mode and press the up /+ to increase temperature down/- to decrease temperature

[@jimauch94]

Hot water heat. What should my settings be?

[@D2DNYAC]

Hot water heat with forced air set 200 to 1 and 205 to 5

[@D2DNYAC]

Set 200 to 3 for hot water heat from radiators

[@AceChappavelli]

Hey yardie help me fix my ac it’s a Lennox

[@D2DNYAC]

We can try

[@drucilladees7343]

THANK YOU SOOOOO MUCH

[@D2DNYAC]

Thank you for watching

[@crichen]

Genius!!!!!!!!!!!!!

[@soulfultenor]

That batteries are meant for backup if the power fails

[@D2DNYAC]

Backup for what?

[@soulfultenor]

@D2DNYAC If there's a power failure for extended lengths of time, the thermostat doesn't loose it's function or how you have it configured; especially if it's a programmable thermostat.

[@yinniliz34]

thank you

[@D2DNYAC]

Thanks for watching

[@eliesewhite]

Thank you!!!!! ❤️

[@D2DNYAC]

Thanks for stopping by

[@DEAD_Monk_vr]

THANK YOU!!!!

[@elvincoulter6275]

this is saturday night live

[@Jacksirrom]

I was here cuz I thought I didn't know how to control it, turns out my dumbass dad had turned off the switch on the furnace. Go check that people.

[@D2DNYAC]

😂

[@9rivers]

FYI this stat will not work on a rheem heat pump

[@rmorales4605]

So is this thermostat for heat pump?

[@D2DNYAC]

It can be used on heat pump as well as regular conventional systems