Good to have black paint lying around for touch-up. I like the rust converting black paint. 👍
@2zzlow4 жыл бұрын
Lmao 😂 indeed looks a little better now
@antbankzbruh4 жыл бұрын
Wow really need to do your research and still might be trial and error when doing this type of stuff, very informative as always 👌
@2zzlow4 жыл бұрын
No problem fam! Thanks
@drs2504 жыл бұрын
Bro! You are awesome how you explain each details 💪🏼💪🏼 thanks !
@2zzlow4 жыл бұрын
No problem fam!
@brinho1094 жыл бұрын
07:45 that little part is so important, when it's damaged you'll grind gears and be locked out of some gears.
@2zzlow4 жыл бұрын
ohh fuck good to know thanks!
@kareembell116411 ай бұрын
Hi, what's it called I need to buy it
@kareembell116411 ай бұрын
7:42 what's the name of the cap?
@joeblogs63803 жыл бұрын
A plumbers bath tap spanner does sensor to get off no damage
@2zzlow3 жыл бұрын
Thanks for the input. Maybe on the next one I’ll try
@uoykcajssa4 жыл бұрын
I'd be interested: on the original XRS trans, w/the selector shaft removed, take a long extention, and see if you can carefully tap-out -what appears to be -a factory 'plug'.
@2zzlow4 жыл бұрын
getting them rebuilt
@SR_KSERIES4 жыл бұрын
Nice! Throw some fluid to help not be dry. Thank you for the video.
@2zzlow4 жыл бұрын
Anytime and thanks
@kareembell1164Ай бұрын
Good day, where can I get a used corolla xrs selector shaft to buy?
@jhmautomotrizsv1994 Жыл бұрын
Waaaooo bro thansk, my corolla 99 it on the NEW transmisión c60 for this video 🎉❤
@2zzlow Жыл бұрын
no problem homie!
@lomfmur2 жыл бұрын
At 3:25 what did you use for a gasket between the two?
@aidandeasy7145 Жыл бұрын
Hold up! Anywhere else iv seen this it says you have to swap the actual workings of the c60 shift shaft onto the xrs? I'm literally doing this in 2 days an this way would be so much easier
@luischuleta4 жыл бұрын
Hey bro, nice job i always follow all your videos, i got a question for u, my 03 xrs matrix manual wont go into gear anymore i replace the master cylinder even when the sleve was moving but that didn't fix it. What u think it would be
@2zzlow4 жыл бұрын
maybe the pressure plate cracked or the throw out bearing seized?
@brinho1094 жыл бұрын
make sure that bushing he showed at 0745 is not damaged. When it was in mine it dislodged and locked me out of certain gears.
@stephonthomas33367 ай бұрын
But the shifter cables are too long for the corolla
@jacobxiong7936 Жыл бұрын
Hello so i just recently swapped to the c 60 to go six speed instead of 5. Do i need to swap the speed sensor on the c60 for the original. Also do i need to swap out the shifting mechanism
@MrJrod8994 жыл бұрын
Do you think it would be possible to put a 2ZZ motor on an all-wheel drive Matrix?
@2zzlow4 жыл бұрын
If a c60 bolts up to a 1zz I’m sure a 2zz will bolt up to the awd system but you would need an ecu that can handle the automatic trans
@joserodriguez75583 жыл бұрын
Nice video!!!! Did you still have the stuff from the Celica? I mean the parts what you removed from that transmission
@2zzlow3 жыл бұрын
no i ended up tossing them since no one claimed them on my parts page
@joserodriguez75583 жыл бұрын
@@2zzlow ok thanks for response. What’s your parts page?
@dylanhall89943 жыл бұрын
I did the c60 swap and I can’t find reverse? I have 1st-6th gear but it won’t let me go to the left and up without going into first gear… any idea man?
@2zzlow3 жыл бұрын
did you do any changes to it?
@dylanhall89943 жыл бұрын
@@2zzlow I swapped c59 to c60. Swapped over everything you did in the video and I can’t find reverse. Even if I take the cables off, I can’t manually find reverse by shifting it with my hand.
@gen9storevlog3222 жыл бұрын
Bro ! Thank you for sharing!!❤
@96MustangBoy14 жыл бұрын
Can I use the 5 speed parts on the 6 speed?
@2zzlow4 жыл бұрын
some not all
@96MustangBoy14 жыл бұрын
@@2zzlow as far as the shift mechanism
@REVOLUTIONS-EDGE Жыл бұрын
Hey man I’m late but is this possible like backwards? Like can I take a matrix transmission and put it in my Celica? I have an auto and want a manual but can’t find any! 😊
@2zzlow Жыл бұрын
You would have to drill a hole where the selector shaft goes
@REVOLUTIONS-EDGE Жыл бұрын
@@2zzlow is that even suggested? Like how hard would it be
@jonathanalamo47642 жыл бұрын
Hello I hope you are well, I have a 99 1zz automatic corolla I want to make it standard, which transmission do you recommend I use?
@2zzlow2 жыл бұрын
C series
@christianmeneses26422 жыл бұрын
Toyota c56 5speed transmission should bolt right up
@angelrodriguez68044 жыл бұрын
How do i know is lsd?
@2zzlow4 жыл бұрын
Look through the axle hole or check the vin on the trans
@atom6082 жыл бұрын
Whats the difference between a celica c60 and corolla one?
@2zzlow2 жыл бұрын
selector shaft for corolla in the rear, celica is in the front
@jhmautomotrizsv1994 Жыл бұрын
Bro the c60 have lsd 😮?
@2zzlow Жыл бұрын
I had one installed on mine
@kriszzt37872 жыл бұрын
is it possible to use a celica 2zz ecu in a corolla ?
@2zzlow2 жыл бұрын
get the stock ecu reflashed instead
@kriszzt37872 жыл бұрын
@@2zzlow I'll have to use a 1zz ecu, would I need to add anything to account for the lift ?
@christianmeneses26422 жыл бұрын
Do you happen to know if this is the same for 03 vibe gt ?
@2zzlow2 жыл бұрын
Vibe is the same trans from a Corolla / matrix
@christianmeneses26422 жыл бұрын
Sweet thanks ! So just to be clear, the vibe would have the shaft in the rear, so I’d have to follow this conversion correct ?
@2zzlow2 жыл бұрын
Yes the vibe would have the shaft on the rear side near the fire wall and this tutorial is to convert a Celica c60 to work on a vibe/Corolla/matrix
@christianmeneses26422 жыл бұрын
Sick, I really appreciate it man, great video
@Gman-kw6kk4 жыл бұрын
💯👍
@2zzlow4 жыл бұрын
🤙🏼
@pristboy4 жыл бұрын
Nice video
@2zzlow4 жыл бұрын
Thanks fam!
@hanseljuarez36822 жыл бұрын
Can you convert a Corolla to a Celica?
@2zzlow2 жыл бұрын
would require drilling and I personally wouldnt do it.
@hanseljuarez36822 жыл бұрын
@@2zzlow Thank you
@Raymo2u2 жыл бұрын
@@2zzlow I have a Celica GTS and I believe the synchros are going. The car wont go into reverse or first unless the car is shut off and it grinds going from 1st to 2nd. I found a XRS C60 for pretty cheap. Could I swap over the Celica Housing onto the XRS tranny so no drilling would need to be done?
@2zzlow2 жыл бұрын
Yes I’ve had my transmission guy do that for me before on a broken case c60 that I got from the junk yard
@AmeriFanPicker4 жыл бұрын
You need a fking cat (the birds lol)
@2zzlow4 жыл бұрын
I own 3 cats lmao 😂
@Makal.0w0 Жыл бұрын
Can you put the 2zz from the celica gts into a matrix?
@2zzlow Жыл бұрын
Yes
@Makal.0w0 Жыл бұрын
@@2zzlow hell yea, thanks for the quick response. I bought a totaled gts to swap the 2zz into my matrix.