Seriously man I've got commend you on working in really tough conditions outside in the street without any proper lifts and you don't even complain once ,cheers man
@2zzlow3 жыл бұрын
thanks fam! gotta do what i gotta do to get it back on the road.
@Pallidus_Rider3 жыл бұрын
The real test is some hard pulls 🤪
@2zzlow3 жыл бұрын
What was that pull at the end of the video lmao 😂
@antbankzbruh3 жыл бұрын
Your dedication is top notch bro
@2zzlow3 жыл бұрын
Thanks fam
@tkflex23322 жыл бұрын
Great video! Good tips to catch here. That auto touch as u got out is on point
@2zzlow2 жыл бұрын
Glad you liked it
@thefatmanmx3 жыл бұрын
Just dropping by to give you a like. I'm stoked to see the corolla back! I'm saving this video for when my c60 inevitably explodes. 😅 Much love bro!
@2zzlow3 жыл бұрын
thanks fam! I appreciate it
@blisterbrain3 жыл бұрын
I hate working in the street. It's like taking a shit in a public bathroom with no stalls.
@2zzlow2 жыл бұрын
lmao wow i guess i can see that hahaha
@andrewz96763 жыл бұрын
Keep doing what your doing bros i support what you do since day.. ill keep sharing to friends to family to make you hood famous lol😅
@2zzlow3 жыл бұрын
thanks fam! appreciate it!
@luischuleta3 жыл бұрын
Keep up the good work brother
@2zzlow3 жыл бұрын
Thanks, will do!
@uoykcajssa3 жыл бұрын
'pizza mind'
@2zzlow3 жыл бұрын
lmao
@andrewz96763 жыл бұрын
Banging gears shedding tears🥲
@2zzlow3 жыл бұрын
there ya go lol
@N1withaskillet3 жыл бұрын
I would have replaced the throw out bearing for the same reason you replaced the rear main. It's cheap and it'll drive you nuts if it starts to go. Chances are the clutch will die long before the bearing in this case especially with forced induction right? Can't wait to see!
@2zzlow3 жыл бұрын
Agreed I probably should of replaced it but I’m getting my original corolla c60 fully rebuilt with carbon synchros so I’m sure I’ll swap it out before the throw out bearing gets to that point. But then again throw out bearing had 35k miles Original Rear main seal had 230k miles Yea Greddy supercharger sitting in my garage waiting to be installed
@loganamurray642 жыл бұрын
@@2zzlow im surprised you’re supercharging a car with a 1/4 million miles on it
@bryan128873 жыл бұрын
I'm having trouble removing my driverside axel , I tried to use the shift fork method , can't get it to fit
@2zzlow3 жыл бұрын
Is it a c60 fork? It only work one way also so try both sides
@leongodfrey7875 Жыл бұрын
What oil is reccommended for the c60 lsd?
@mnorman82273 жыл бұрын
Come on Valvoline sponsor this young man!!!
@2zzlow3 жыл бұрын
Exactly! Lmao 😂
@josephzuniga29942 жыл бұрын
En qué parte de California estás? Pregunta hay que hacer modificaciones para instalarla una transmisión de celica a corolla?
@2zzlow2 жыл бұрын
stockton y si hermano tengo un video pa transmission de celica para corolla
@callbrin5733 жыл бұрын
I recently installed an act clutch. I looked up torque specs and saw 27ft lbs. You say 14ft lbs. Would tightening it down too much cause problems?
@2zzlow3 жыл бұрын
27ft lbs seems like a lot for a small 12mm bolt. Honestly it’s the flywheel bolts that are much more important since it’s the one attached to the engine. I just did the pressure plate bolts tight enough since I read online 14ft lbs and that’s not a lot. Just be careful to not tighten it too much of you will strip it
@dasfirej45972 жыл бұрын
Did you figure out where the vibration came from when you're on 2nd gear? I just did my clutch flywheel both axles and now I'm getting that vibration same speed and RPM
@2zzlow2 жыл бұрын
had a bad motor mount and ended up replacing my axles
@carloscrod_3 жыл бұрын
morning work videos ftw
@2zzlow3 жыл бұрын
You know it
@carloscrod_3 жыл бұрын
@@2zzlow 12:30 lowkey wanted to see the list of part numbers for all the mounts in the description
@autentikopr72003 жыл бұрын
Cual es la ventaja de que tenga tracción en las dos ruedas, correr mejor en alta o para arranque que agarre mas?
@2zzlow3 жыл бұрын
por las curvas entrar mas rapido
@perezwailyn778 Жыл бұрын
Hey man love your videos! I just got a xrs 2005 Corolla and I put a hole on the tranny and I was looking at the celica gts 2000 and it looks like the transmission is the same I was wondering if I’ll fit without a problem! Thank you
@2zzlow Жыл бұрын
follow this video kzbin.info/www/bejne/nGPNm6OElr6fpZI
@Gman-kw6kk3 жыл бұрын
💯👍
@2zzlow3 жыл бұрын
thanks fam!
@kareembell11643 жыл бұрын
where you plan on buying the sugercharger kit for the 2zzge?
@2zzlow3 жыл бұрын
Follow my Instagram, I already have one and it’s going in soon
@jayns13 жыл бұрын
Is it hard installing a C-60 Transmission also how long does it take to install?
@2zzlow3 жыл бұрын
its not hard, about 8 hours or so to remove and install
@strifu8083 жыл бұрын
Thanks for the part numbers! Is it cheaper at dealerships?? I also need the bolts to go to the bell housing since one of mine is missing -_- and the throw out bearing, how would you know it’s bad?? Thanks a lot bro!
@2zzlow3 жыл бұрын
Get them off toyotapartsdeal.com Spin the bearing and make sure it doesn’t bind or grind
@strifu8083 жыл бұрын
@@2zzlow thanks bro! Thank god I procrastinated lmao
@joegz58093 жыл бұрын
nice vid.. i think i would go chromolly.. had aluminum one in my mr2... flex at high rpms scare me.
@2zzlow3 жыл бұрын
ill consider it for next time thanks
@shadowninja76932 жыл бұрын
Hey bro what oil is best for the transmission in your opinion?
@2zzlow2 жыл бұрын
i just use Valvoline synchromesh
@snowcelica0013 жыл бұрын
Have you ever been able to remove a manual C60 transmission off a 2zzge engine without removing the whole engine? I just reinstalled my 2zzge engine back in and I"m now having problems shifting into 6th gear. I'm hoping I don't have to remove the whole damn engine again in order to remove the transmission any input would be appreciated.
@2zzlow3 жыл бұрын
thats alot of work, its easier to just remove both and reinstall both at the same time.
@snowcelica0013 жыл бұрын
@@2zzlow Update: I got the transmission removed off with the engine still in.