Easy and Perfect Maybe it's the most perfect way to cut glass with simple tools,subscribe my channel for more awesome ideas!
Пікірлер: 702
@atlasrunner82063 жыл бұрын
Loved It.... No Music.... No Theatrics.... No Production.... "STRAIGHT TO BUSINESS" Thank You.....
@henryb4472 жыл бұрын
100/ 100 right
@Frip36 Жыл бұрын
I knew some goof would say how much they LOVE the minimal.
@barrymccaw-kinner7250 Жыл бұрын
No protection 🤕🤘
@User-oh8vi Жыл бұрын
this youtube video should be a role-model for all other videos
@Bozena-nz8mp2 ай бұрын
👍
@karlau1084 Жыл бұрын
5 years later and this is still useful to someone just starting out on this. Thanks!
@latenbargestin5918 Жыл бұрын
Using this method to make a bong using like 6 glass stuff I got at the thrift store
@chrisst8922 Жыл бұрын
Years ago there was a tool called The Bottle Chopper. It was in the 70's. I think we bought one for Dad, the kind of present you bought when you'd got fed up buying socks. Made of flat steel one part scribed the line whilst the other fitted inside the bottle where you tapped at the line until it parted. There was also some sheets of wet & dry so you could smooth the cut edges. It might've won a design centre award. The award for the quickest placement at the back of the cupboard from where it never came out again.
@uturniaphobic Жыл бұрын
I remember that thing on TV. way back
@BeasleyStreet Жыл бұрын
Still got mine...
@ritakisil16697 ай бұрын
😊. Been trying to get glass cutter..maybe I should get this at a craft or hardware store. I dream of making my own chimes. Happy new year everyone
@juanitasanchez38145 ай бұрын
ahhh memories
@kingdomrunt3 жыл бұрын
Wow! You my friend are OUTSTANDING! I just went through umpteen hundred (exaggerated) videos of how to cut a bottle. All of those videos were long and boring, leaving me to set it all down. Then I see your video!!?? Brilliant!
@nicolo90933 жыл бұрын
Very good, but you should take care to wet the glass and the paper when you're sanding it. When sanded dry, the siliceous particles can go into your lungs and there's no way to get them out so be careful
@theopowell88152 жыл бұрын
Wow thanks so much for this info... jeez that's scary
@rivahkillah2 жыл бұрын
I'd have recommended a mask
@Yoshi922 жыл бұрын
@@rivahkillah Wet sanding >>> wearing a mask You can additionally wear a mask to be absolutely safe, sure, but doing it wet is the important part. People who work with glass everyday don't use masks, they simply do it wet. Because Silicosis is no fun disease at all.
@tontonkaldoche3481 Жыл бұрын
Thanks sir !
@randmayfield5695 Жыл бұрын
Actually there is a way way to get glass particles out, it's called cremation. Works everytime.
@arupsengupta24543 жыл бұрын
Power of silence. Thank god for not loading with jarring musical noise 🙏😆
@aaravinteriorspvtltd3 жыл бұрын
😂
@M.C.Blackwell2 жыл бұрын
Agree!
@bettyb13132 жыл бұрын
Right
@ik6657 Жыл бұрын
So ture 👍🏻
@kiddie79 Жыл бұрын
True dat!! Lol
@MWeebposting3 жыл бұрын
This is the cleanest cut I've seen in any tutorial
@141sharon2703 жыл бұрын
Cool trick, out of all the KZbin video's I've watched on bottle cutting, I think this one gave best results. All the ones that doesn't use a glass cutter comes out pretty shiny.
@alasdairdouglas74853 жыл бұрын
That was amazing, that was just was the easiest I've watched so far, and I've watched dozens, will be using your method and no expensive tools required thumbs up for you tks👍
@colleenankersmit78583 жыл бұрын
This was so helpful! Loved it! No bs, just a straight forward way of explaining and showing the results. I'll watch more for you!
@WandaThePanda Жыл бұрын
I love tutorial edited this way. No music, no nonsens. Amazing. Couple questions: - The tape can be of any width, right? - What's the best way to reattach the two pieces? I'd like to make a glass candle, it doesn't have to look perfect and 100% neat, but can the two pieces be reattached together once I put the wick in place?
@bustabee143 Жыл бұрын
I'd say epoxy to put it back together
@WandaThePanda Жыл бұрын
@@bustabee143 thanks! But how would that work? Is a thin layer, like glue, enough or does it need to have some thickness?
@Wolfe_Metals_Stacking Жыл бұрын
@@WandaThePanda quality epoxy is usually tougher than whatever is being "glued" together with even a thin layer. The material will fail before the epoxied joint will.
@albeniasantos56932 жыл бұрын
Muito bom Parabéns nota 10 Obrigado
@iamhere2332 жыл бұрын
Perfect is right! So patient! So detailed! I'd say... even entertaining to watch! Thank you.
@tynewlin Жыл бұрын
Best use for a Budweiser I've seen yet.
@brianbassett43794 жыл бұрын
In the 60s my Dad used a steel rod, sharpened point, with a 90" bend to slide down inside the bottle and tap the etch to start the crack in the glass. He would continue to rotate the bottle tapping the etch from the inside and you could see the fracture crawl around the bottle. Even a single small crack would speed up the process of using hot water to get it started.
@welcometoorefuge Жыл бұрын
It was called the Fleming Bottle and Jug Cutter !
@canuck24443 жыл бұрын
That's pretty cool, guy. Same concept as cutting tile. Did not realize this would work on round objects!
@micklatham34252 жыл бұрын
Perfect. Exactly what I wanted to see. Thank you.
@JustlittleolemeSuzi Жыл бұрын
Thank you! Simplicity and Silence combined create near perfect recall for the Spatial mind
@robertcasey73123 жыл бұрын
Thank You. Greatly appreciated.
@jaywhy31784 ай бұрын
Awesome - thanks for the video, this is just what I need. I have a round whiskey bottle that I think will be funny to convert into an oversized whiskey glass! Also, like others have said - I really appreciate the no-nonsense approach to an informational video. No over the top anything, nothing extra that isn't needed. Just info and demonstration.
@pikifrino3 жыл бұрын
Very professional cut. Thank you
@Fragile_Moonlight Жыл бұрын
Just a suggestion. What if you clamp the cutter to the board to get a close enough precise cut. But thank you for the video! Helped a lot! Just got my glass cutting set and can’t wait to use it.
@ricardogastmann96883 жыл бұрын
Good idea friend! Thank you so much! From southern of Brasil.
@billyhawk11263 жыл бұрын
I tried this and succeed the first time!!! Thanks for sharing✌
@tomanicodin4 жыл бұрын
From all the videos I've seen so far (10) about glass bottle cutting, this one seems to be the more simple and realistic. Heads up!
@veryworks59634 жыл бұрын
Thanks
@dollyviana59404 жыл бұрын
Hola para que pones la cinta y como se llama mil gracias
@albeniasantos56932 жыл бұрын
Muito bom Parabéns nota 1000
@CutterMasterArt3 жыл бұрын
Could u pls. explain what does the tape do?
@JohnnyZenith3 жыл бұрын
What is the tape anyway?
@ollvebranch2 жыл бұрын
That. Is. Neat! Came here to find a more elegant solution than using plastic bottles to water my plants. Now going to get on making these to add to my terracotta drip stakes.
@bobariawan19144 жыл бұрын
Thanks a lot! It's very usefull
@jekrecluse Жыл бұрын
Thank you! Brilliantly simple methods!
@miksUSA7773 жыл бұрын
Tape acts a barrier against temp changes when it is shocked. Even if you score it, without the tape, areas near the scored line hv a tendency to break & misaligned. more sanding then. Try w/o tape & u will see. make vid.🤗
@JohnnyZenith3 жыл бұрын
What is that tape?
@thanatosor Жыл бұрын
@@JohnnyZenith Yes.
@mentalcowboy1986 Жыл бұрын
You can use any tape lol
@Coquijim3 жыл бұрын
This the best method yet and safe. TFS
@barneylinet6602 Жыл бұрын
Smooth as butter!!!! Thanks for posting.
@antoniorodriguesleme2144 жыл бұрын
Só queria saber que fita é esta e se posso usar fita crepe para substituir esta?
@OsceolaFoodForests11 ай бұрын
Just performed it.. worked like a charm.. thank you
@elbus19694 жыл бұрын
Thanks a lot!
@prakashturlapati82153 жыл бұрын
Excellent. Unbelievably good. The manoeuvring movements are fluid and dexterous. 😱👌👍👏🙏😀
@wilsonvargas97654 жыл бұрын
Muy practico y exelente como se llama esa cinta
@omniavincit74 жыл бұрын
Es cinta 3M con doble pegamento, pero cualquier cinta sirve, no tiene que ser esa.
@mmercier09213 жыл бұрын
Using a soldering iron to fracture score lines is more reliable. Maybe I had inconsistent results with the hot/cold water method because I did not use tape.
@victorprangecampos743 жыл бұрын
Muito bom!
@deepikadj22verma624 жыл бұрын
Wow that was a perfect cut 👍
@veryworks59634 жыл бұрын
Thanks
@psun29684 жыл бұрын
Hi, Thanks for this video. I watched this video a couple of times before attempting this. How much pressure do you use when scoring on the bottle. I can see the score line but it didn't crack along the score line. one end crack upwards and the other downwards, so missing each other by an inch. Also, how often should i change the blade on the glass cutter please. Thank you
@veryworks59634 жыл бұрын
Try to keep the line straight, repeat it a few times, and just scratch it a little bit. Pour boiled water and ice water into that gap. Try it , You will be successful.
@marialuisadirociealcantara26853 жыл бұрын
Cómo se llama la cinta que usaste en español
@rodrigjose2 жыл бұрын
@@marialuisadirociealcantara2685 cinta adhesiva
@geethaillangage54044 жыл бұрын
Good idea. 👍 Thank you. 🤗
@EloquentMess3 жыл бұрын
Great video, thank you! Question: what does the tape do?
@possiblyvi3 жыл бұрын
I believe it’s for a better, more clean cut. You could do it without ofc, but I noticed my bottles look nicer when I protect the rim with tape.
@ivanerasmus14053 жыл бұрын
@@possiblyvi You could use a rubber o-ring too - it is is reusable too!!
@nilscoram2 жыл бұрын
It's usually meant to be something that creates a channel for the hot water so only that section within the area gets hot, no idea why this person used tape
@lilianavied2 жыл бұрын
Gracias, es el mejor video que he visto, me quedo con este.🥳🤩🎉
@kristycannon79233 жыл бұрын
One of the cleanest cuts I've seen! 🤗
@patriciahogg57633 жыл бұрын
Perfection!! Thanks for sharing! 😎
@glorytorreon70603 жыл бұрын
so far this is video is perfect circle ive watch in many titurials
@nigelcarren Жыл бұрын
Thank you, I was going to do this but then I found my bottle-opener! 👍😉
@galewinds769612 күн бұрын
Always and I mean Always know where your church key is 😅😅
@ce94493 жыл бұрын
Oh wow that's so cool! You can use the bottle bottom as an ashtray paint it and give it away as a gift! Neat!
@danielgoetz7821 Жыл бұрын
You think that method might work on thicker tube style glass?
@renantevaldez20394 жыл бұрын
Can you give d one u use in cutting. Thank u sir
@daisysano78632 жыл бұрын
Excited to try! Without the use of expensive tools, thanks for sharing! By the way, what tape was used?
@louel9272 Жыл бұрын
You can use any tape
@SwissNoobWatches2 жыл бұрын
Thanks Great Video No bs No music No click bait
@tonifafa3 жыл бұрын
Thank you for sharing. How do you grind the inside rim of the glass?
@timjohnson11993 жыл бұрын
I have a little diamond wheel for my dremel that works well.
@ritakisil16697 ай бұрын
Thanks...the easiest bottle cutting video I've seen. Maybe I'll use wet sandpaper for smoothing the edges.
@violetseven44854 жыл бұрын
Yessss!!!!! We have no recycling service here, and I've been looking for ways to reuse waste products. This is great, thank you
@robertlong95524 жыл бұрын
Where do u live
@violetseven44854 жыл бұрын
@@robertlong9552 in middle-of-no-where Texas. Lol
@robertlong95524 жыл бұрын
Ha ha fair enough 😂
@parikhspiecederesistance39583 жыл бұрын
Perfect 👌🏻 🙏🏻 Mumbai India 🇮🇳
@damoneimad4217 Жыл бұрын
Scored with glass cutter-Check. Boiling water-Check. Ice cold water-Check. Bottle breaking-NO. Repeated process 15 times- Check Did it break? No. So ended up cutting with a diamond blade tile saw. Worked perfectly.
@markdoherty7542 ай бұрын
I've had the exact same experience.
@Skullsanddragonflies3 жыл бұрын
OMG I was having ASMR until you pulled that sander out! Haha!
@matildasanchez3 жыл бұрын
Thanks for making it very easy.
@gailraszewski4452 жыл бұрын
I have an old style 1/2 gallon Almaden wine bottle filled with pennies. Will this method work to cut the bottle somewhere. Any suggestions?
@Ronak03074 жыл бұрын
perfect 👏👏👏👏👏
@iansuleski68573 жыл бұрын
Did you use any sort of cutting oil with the glass cutter?? I've looked through the comments and don't see anyone mentioning it. I'm subscribing to your channel, great video!
@Kampbell300 Жыл бұрын
Water is the best
@mentalcowboy1986 Жыл бұрын
Cutting oils best not water as the cut needs to be wet all the time if its too dry it cracks
@delsakelly14564 жыл бұрын
Wow! Never thought of that!
@delsakelly14564 жыл бұрын
Not going to do it but I can tell someone to do it for me. Thank u for the video. There's always something to learn.
@javiertrejo72653 жыл бұрын
Hi, really nice method. What is the purpouse of the tape?
@mgb4263 жыл бұрын
I was wondering the same thing
@castanedagus Жыл бұрын
I’ve seen this done before. But what’s the tape for?? Isn’t it easier to just stick the bottle into a boiling water pot??
@Turrican608 ай бұрын
You don't need tape to cut a bottle...it's a fallacy.
@subhashgawarikar33963 жыл бұрын
Quite interesting. Thanks for the video!
@rebelbell21954 жыл бұрын
Could you post the link to your DIY grinder? I'm having trouble finding it. Thanks!
@veryworks59634 жыл бұрын
The tutorial is in my channel
@haidenteafoe22753 жыл бұрын
what tool do you use to score it
@streetlegal0084 жыл бұрын
Also would need to grind the inside edge of the glass with a rotary grinder with fine sandpaper for a smooth, rounded finish.
@jaywilliams51382 жыл бұрын
No need for a grinder. Fine wet/dry sand paper will do the trick by itself. Very easy.
@davebowker11133 жыл бұрын
Soooooo cool Let’s start doing more with glass bottles rather than just throw away!!!!!!
@billyeast6819 Жыл бұрын
Great worked first time. I got the outer rim bevel now how to get the inner rim beveled?
@dougnice67 Жыл бұрын
great video! just what I needed to turn my beer drinking into and even more positive experience. Question: What's the purpose of the tape???
@mentalcowboy1986 Жыл бұрын
It reduces any cracks and takes the shock in the glass a bit
@mentalcowboy1986 Жыл бұрын
Also acts as a guide too
@mikelm61983 жыл бұрын
Maybe I missed something but what is the tape before
@tomgillespie1953 жыл бұрын
Helps stop the stress fracture from becoming jagged as it protects the bottle only a little thing but can make a difference!
@pappurao77453 жыл бұрын
Good ! Was there any need for the taping ?
@charlesmurray1220 Жыл бұрын
How about that inside edge? Shouldn't that need grinding or sanding?
@karolgarley3 жыл бұрын
I'm not sure why this looks so satisfying!?! 🤔
@Quitplaying3603 жыл бұрын
Even more satisfying than sex?
@AlbanyVixen11 ай бұрын
Fantastic, just what I needed to know thank you.
@deloreanfan812 жыл бұрын
What is the width of the tape you used?
@sebastianfrias84684 жыл бұрын
"EL CORTE SE PUEDE HACER EN CUALQUIER PARTE DE LA BOTELLA?"
@couchie_uk6 ай бұрын
Can this heating and cooling technique be used on bottles that aren't circular? I'll practice on a round glass bottle, however, I want to make a lampshade using three glass whiskey bottles of an irregular shape. Thanks for the great tutorial, you make it look so easy.
@princesssmith234 жыл бұрын
Y tiene que ser esa cinta???
@miluskasantacruz5705 Жыл бұрын
Thanks for your video.....what kind of tape did you use??
@Rc_Redneck83 Жыл бұрын
Great work my friend. What tape did you use and what tape would work?
@hadasgvili52264 жыл бұрын
What type of sand paper did you use on the grinding machine?
@veryworks59634 жыл бұрын
First use the coarse sand paper and then use the rough sand paper
@Quitplaying3603 жыл бұрын
@@veryworks5963 he wants to know the number smh
@Stonefalconetti Жыл бұрын
@@Quitplaying360 he did ask "type"...not necessarily number.
@user-xm7lk8kw7g2 жыл бұрын
great video! But does anyone know where I can buy a bottle like that instead? :)
@paigeturner1652 жыл бұрын
Would using elastic bands work instead of tape or not? Just trying to save time as I’ve lots of bottles to do 👍🏼
@beeman12462 жыл бұрын
No tape is needed. Sometimes it prevents cracks.
@louel9272 Жыл бұрын
The elastic band would warp with the hot water
@sabeetreesobha95044 жыл бұрын
This is very safe method of cutting
@18missmm3 жыл бұрын
That was really neat!
@CallMeSlavik2 жыл бұрын
Can you just dunk it in boiling water? And then into cold? Or should you pour the boiling water?
@CA-LOVEFORJESUSCHRIST3 жыл бұрын
The cleanest cut I've ever saw.
@ahmeddmeutube90853 жыл бұрын
seen, not saw.
@CA-LOVEFORJESUSCHRIST3 жыл бұрын
@@ahmeddmeutube9085 If I want to say SEE, or Saw It's my business...but thanks correction Police! Let me say it the way I want to, I'm not hurting you or anybody else.
@psedach3 жыл бұрын
I LOVE IT! But question... What do you use the half a glass bottle for?...
@veryworks59633 жыл бұрын
For making lights
@billyharvey27562 жыл бұрын
Geeb
@WisdomLightChild Жыл бұрын
Does this work for ceramic?
@marialuisadirociealcantara26853 жыл бұрын
Cómo se llama la cinta que usaste en español. Gracias.
@9catlover2 жыл бұрын
Saved to useful folder :) Thank you
@xnihiloy4 жыл бұрын
Will this method work on uneven shaped and uneven thickness bottle?
@veryworks59634 жыл бұрын
The same
@salort29344 жыл бұрын
What is that for?
@gman87603 жыл бұрын
can you provide a tool list to how this was done. I would like to start cutting bottles as well. I honestly was just going to use a dremel to cut them
@paulcarter25582 жыл бұрын
There’s a company that sells a package just for this