Safely debadge your vehicle www.ckwrapsmia... Get Certified Visit www.vvividhq.c... Instagram @ckwraps @newconceptautosalon
Пікірлер: 63
@renaissancelaboratories56454 ай бұрын
I’ve been watching a ton of your videos and I wanted to thank you. I’m considering wrapping my AMG and I’m learning so much from you. This is hands down the best de-badge video out there. Every time you say “take your time” I think how pleased your customers must be with the high quality work you do.
@TheDragoon886 жыл бұрын
Exactly what I was looking for. Please do a video showing how to apply adhesive and putting the emblems back on after the wrap.
@JQUICK214 жыл бұрын
This is just what I stated before seeing your comment! Too bad you never got an answer. Have you learned any tricks or how to get them back on?
@jakemaddox764 жыл бұрын
I have the same question. I don't know if 3m double-sided tape or glue will stick to the vinyl, or if the vinyl will not "pull away" from the car because of the weight of the emblems. Same question regarding the make badges on the hood and trunk.
@NxteGrinds3 жыл бұрын
What kind of line did he use to take it off ? I can't find it
@NxteGrinds3 жыл бұрын
@@jakemaddox76 yeah I have no idea and would like to know myself
@jakemaddox763 жыл бұрын
@@NxteGrinds I ended up putting them directly on the vinyl, still holding strong
@buddytynes86332 ай бұрын
So many wrap videos don't explain this. Thank you for your service.
@ICEvapr6 жыл бұрын
Thanks Christian! Looking forward to seeing how you reapply the adhesive
@djsonfire00016 жыл бұрын
Wondered how this was done... I debaged my caddy all but two emblems... I like that cleaner look. Great work Christian!
@thorsteng.89543 жыл бұрын
No, the "C" in GT C doesn't stand for convertible. It's the motor lineup which is GT, GT C, GT R post facelift.
@speedr19766 жыл бұрын
I use a heat gun to loosen the glue before I use fishing line👍
@Technique9176 жыл бұрын
Extremely helpful. Thanks! This was one of those things I couldn't ever find someone teaching.
@ACEintheCROWD6 жыл бұрын
Awesome video! I would also like to know the type and how to reapply adhesive to the badges.
@davidweber45914 жыл бұрын
Best thing I've ever used to remove the black glue from under the badge is the 3M Strip wheel. It's amazing. Also thanks for sharing your tricks very helpful.
@JQUICK214 жыл бұрын
Need to know how to re-install emblems after the wrap is done!!!!!
@AndreyBender6 жыл бұрын
Great video! It would be great to see how you set the emblems back :)
@petewoody59846 жыл бұрын
probably with double-sided tape
@AndreyBender6 жыл бұрын
I understand this, but maybe there are some nuances, or Christian has a special exclusive technique for setting emblems! 😜
@petewoody59846 жыл бұрын
I feel you on that, I too was wondering how to get them back into the same spot they were before
@1mexico1fut6 жыл бұрын
Pete Woody Its done with 3m
@JQUICK214 жыл бұрын
@@1mexico1fut It is done with 3M? That is a company, not a product!
@titosxy54896 жыл бұрын
Nice tips , thx for all your Videos its really informative👍🏼👍🏼
@danielkattantorres Жыл бұрын
Exactly what I needed! Thank you ck !!
@SimpleDerp6 жыл бұрын
keep busting out them videos dude. Ive watched all the new uploads today
@cmaysautoyt6 жыл бұрын
Awesome, I just asked about this ! Cant wait to see the finished product. I know it will look perfect as always. 🤙
@alvincee76054 жыл бұрын
Dopeness yo! I look forward to all content. Just made transition from aircraft painter to tint and wraps.
@---DW---6 жыл бұрын
I thought you would put a marker on the masking paper to show exactly where the letters go, so you get the spacing right when putting them back on.
@thatsmylife123 Жыл бұрын
Nice idea with the templates! how can I put the type designations on the foil back on the car? Can you make a video on attaching nameplates? Kind regards Marcel
@mikegrozier6 жыл бұрын
Awesome tip Sir. Will you be doi mg a video of the install of the badges? Seems like they're is a trick to getting the adhesive tape back on and cut to the right shape of the emblem.
@signmakertools6 жыл бұрын
We see that our YelloBelt tool pouch becoming attached to your hip ;)
@scottgillig9085 жыл бұрын
In 1990 we had an exclusive adhesive made for GM only called Delco Moraine. It contained benzine, a well known carcinogen that had a smell that stunk and made you sicker than hell. The EPA told us to either build a solvent recovery product ( 1.6 million $ ) or, find somewhere else to run it. Someone said, " Let's send it to our Canadian plant. " Two tanker trucks headed to Canada full of this slop. Both drivers were stopped, and told to turn that sh*t around and take it back to where it came from. " I had known that Canada's emission standards are strict, very strict. But, I wasn't saying a word. I knew what was going to happen. I knew one of the drivers a little. I asked him, " what happened at the border ? " He said, " when they were done with us, our knees were knocking so badly, we had a hard time shifting. " Moral: If you think the EPA is strict here.....don't even think about doing it in Canada. They love their clean air up there. Who can blame them lol.
@mariobarretta6396 жыл бұрын
Thank you man, this video I was waiting 😉 now pls, next video how to put back the badge and which adhesive you use!! Thanks
@billyp3336 жыл бұрын
Thanks for your help....I just took off emblems on my expedition days ago and broke one of the letters ..lol
@felixlugo91096 жыл бұрын
Nice info never really thought of doing it that way
@robertscottdunn5 жыл бұрын
I really appreciate the video showing the removal, and like others, I would really love to hear how you put it back together. When you remove the adhesive from the back of the individual letters, doesn't that peel them off the masking tape? Like others have said, I'm assuming you've got some advice that could really help. Thank you!
@BillClay885 жыл бұрын
Hey man. Bought aftermarket raw bumber for my car. Obviously polyurethane has low surface energy for wrap. Have a friend in autobody who will prime and paint.. well I'll be doing sanding. I can't find a lot info online on how long to wait to wrap after being painted. You have general idea? Thx brother. Awesome vids as always!
@MrRushingKnives6 жыл бұрын
Very helpful as always thank you very much
@stephenchampey94156 жыл бұрын
Have you ever wrapped a Jeep Compass? I have one, I've wrapped the handles, gas tank etc. I'm wanting to do the hood next. Thanks for the video on how to get the lettering off.
@NxteGrinds3 жыл бұрын
What kind of line did you use to take it off ? I can't find it and also what kind of liquid DO I use to take it off ?
@AlexisMartinez-nl5py2 жыл бұрын
Is it imposible to wrap with the badge on? Im starting on this field by myself, im having trouble wether i remove them or not on my bikes tank and make cuts around them
@jerrygillis50646 жыл бұрын
Nice tape trick!!
@VladOnEarth6 жыл бұрын
I thought it’s already wrapped ) nice color!
@cpr3366 жыл бұрын
Your videos give me a chub...how do you reapply them?
@viperishz2 жыл бұрын
What lind of the double sided tape are you going to use to put them back?
@MyAgrael3 жыл бұрын
So , you remove the badges, you apply your wrap . Duuh 😂 . Then you apply the badges on top of the vinyl . What is a customer down the line , let’s just say 1 year he had enhancing of this colour , decide to remove his vinyl on its own or whatever. The f is happening there , he will not be able to put them back as professional as u do it . Please help with this question is bothering me for a while . Or is there a way wrapping around the emblem? Im confused 😐
@NxteGrinds3 жыл бұрын
And how do you put them back on ??
@thebiglachie12786 жыл бұрын
Hey ck before you were big how did you bring in customers
@rstezza6 жыл бұрын
I thought you was gonna show how to take the sticky adhesive left behind.
@ducebigalow88346 жыл бұрын
I have a 2018 civic hatch and would like to blackout the chrome around the window. What would you recommend gloss black or flat black vinyl for this? Thanks.
@CKWraps6 жыл бұрын
Most people prefer gloss black
@giovannigalvan16876 жыл бұрын
Hey I have a question, how do you figure out how to remove a bumper or tail lights? Do you just go in or is there a simpler way ?
@CFClubAmerica6 жыл бұрын
GIO TV most cars have bolts and clips, pretty easy and straight forward. If you’re not confident in removing them yourself, do some research on the car and it’ll show you exactly how to remove the bumper and headlights
@giovannigalvan16876 жыл бұрын
Luis Rodriguez ahhh thanks!
@dinxsy80696 жыл бұрын
What about the removal of left remnants of tape
@nnggghhaa37096 жыл бұрын
Dinxsy use adhisve remover
@jonaslarsen46982 жыл бұрын
This video could be 2min long bro
@1mexico1fut6 жыл бұрын
What double sided adhesive do you use to put them back on?