How to Dial and Change Safe Combination Lock Part 001 | Mr. Locksmith Training Video

[@nialljamesbuckley]

really interesting. i really liked seeing the mechanism work while you turned the dial. thanks for taking the time to make and post this!

[@J_MiX]

Nice

[@handymanmagician]

How would I change the combination to the dial with the door already opened, but I don't have the original combination?

[@ScorpioKay1027]

Because my dad gave me the safe but can't remember the code, so he locked it (while open) to prevent me from getting locked out of it. He suggested a youtube video like this to reset it. Hope that clears it up for ya.

[@aaronnowack3637]

When removing the change key, did you turn it to the left before removing? Or do you pull it straight out

[@stevefernandez661]

Thank you you helped me get my Horizon Safe open 😊

[@BrentThai]

if I don't have a change keyhole like you. Can I use screwdriver?

[@vanessaholland2727]

When I insert my change key the dial will only turn so far before it hits something and won't turn anymore .. hindering my efforts to change combo .. it's an s&g lock .. any suggestions

[@luisp1174]

I enjoy your videos. I have a small sentry safe with lock and key. I forgot combo but it's open. How can I find the number or put a new one in?

[@24hrMrLocksmith]

Call Sentry Safe and give them the serial number. They have pretty good customer service

[@TaoForceDex]

Hi Mr.Locksmith. I've got a problem with my new safe. After changing the combo with the key and change dial. My new combo doesnt seem to work on open dial. But it works on change dial. What could be wrong?

[@24hrMrLocksmith]

Most common mistake is using the last number near the “drop point.” Try using a different number.

[@mrrawbacon]

Awesome! Great video

[@raylopez4779]

I have a 1909 safe i took off back plate on the door it have 4 wheels each one haves a notch how do I get combination numbers to find out what combination numbers on dial to open safe

[@Abdellatif_Chebboub]

Thanks, you don't need any dialing to close it? After open it

[@24hrMrLocksmith]

Close and spin the dial counter-clockwise to lock.

[@Abdellatif_Chebboub]

@@24hrMrLocksmith Ok, now I will go to try to open than close it and come back to make a positive feedback comment if it's done, just wait lol

[@johnr8289]

If you can’t open the safe, try one number high or one number low when dialing up the lock. My safe was off by one number and it would not open. Its trying, but you have to have patience.

[@jessecain9487]

How many numbers were off?

[@MrPeteroni1]

When you a brand new safe, is the dial lock already open or do you have to spin it counter clockwise between 90-0 in order to open and get all the instructions inside?

[@fernandohernandez-wr9ui]

Can a safe function backwards? I bought a diebold safe and the combination starts by turning clockwise

[@24hrMrLocksmith]

4 Wheel and some safes used different combination starts.

[@armos3658]

one question please, if you've done smth. wrong how you can return into previous numbers, is it possible?

[@MoorebankSSCO]

Hi I just change my safe combination but I can't open it there's any way that I can re do it again thanks

[@CaliMaxe]

Can you let me know which key I need for a Canon D-4557?

[@SAICOTICO666]

two questions the first is if you can start at number 0 and the second is if a number can be repeated. brand herring hall marvin

[@24hrMrLocksmith]

SAICOTICO666 Don’t repeat numbers and your last number can’t be in the “forbidden zone.” You could set the combination to only one number or two numbers but not recommended.

[@guido1534]

My dial isn't doing the "lock open" to the right thing. After my last number when I go right to open it doesn't stop and open. Currently can't get the safe open. Mine has the key as well and that is working properly.

[@tara_esports2023]

Hellow how to open honneywell 3014C model combination is lost

[@jdg9359]

Awesome video. Will this work on an old Remington rand safe?

[@antoniodelamerced6125]

Like to change my vault combination I have SENTRY S 3517 how to change the combination i have the okd combination

[@Taterhead3e]

do you know the factoy combination for a browning silver series 2018 bought one out of a salvage yards ,,had some damage,,the handle you spin will come out in your hand

[@jamesspohn992]

So where do I get one of those keys?

[@24hrMrLocksmith]

@@jamesspohn992 Locksmith suppliers

[@toesucker2578]

Can you try to do a video on how to change the combination to a Sentry Safe?

[@24hrMrLocksmith]

Cayden Newcom Coming soon :-)

[@raefordwiggins]

lo

[@lourdes6369]

Hi I want to know how to open the safe. We have the key but it won't open. We forgot the code. It is a manual safe box, the brand is eversafe.

[@johneaves8620]

Where would I get a key ??? I need to change the combo

[@stellabenton199]

Have 2 safes at my job need to learn asap

[@jeremyspeers2338]

I have a century safe by liberty I need to change the combo. I took back off but didn't find a spot for the change key

[@jrh87]

Does this work with sentry safes with dial combination.

[@markanderson2780]

I have just received an old sears roebuck and company safe with Yale on the dail- with no lever-just a knob to pull. If possible could you give me some help on how to open. I've just started watching your video classes and look forward to watching more and hopefully taking some classes. Thank you for your time regardless of being able to help me.

[@TurkeyCreekjackjohnson_]

Ouch

[@יוסףפתאל]

Thank you 😘

[@elsey1976]

I've got a Browning gun safe with S&G dial combination lock. It won't unlock the safe on the last rotation to the right after dialing the combination. Any ideas?

[@kishangurjar9267]

I tried to open the safe, the combinations are correct but the rods that lock it is not coming down at the end pls help me!!

[@24hrMrLocksmith]

Kishan Gurjar Hit the metal above the lock with a Rubber mallet or dead weight hammer several times.

[@ejiakanwaeze2738]

Thanks

[@raviarora7765]

Hi ! Thanks for such a detailed video. I would appreciate your guidance on a related matter. We have a new safe with La Gard combination. Its user manual is not as comprehensive as your video. It says that factory set combination is ‘50’. With only one number ‘50’ described as combination, we are confused whether the 3-number combination could be with same number (50-50-50) or it is only 1-number factory setting ‘50’. We would like to change the combination, but are not sure if we should it with an assumption, as we might end up with a jammed lock. Could you please guide whether it could be simply one number ‘50’ that has been set 3 times? Thanks for your help.

[@24hrMrLocksmith]

Yes, it is set on factory code. Just follow the video. Note: Do not lock the door of the safe until you have tested that the new code works a minimum of three times in a row to open before locking it. Example: lock it open and test new code.

[@albtt9064]

Brilliant

[@padskfoef]

Where can I bye or get hold of a practice lock you have on this video?

[@DrBeltsander]

Saved my ass a engineer call out thank you

[@DadsTrucksBarn]

okay I have a question my nephews and my sons we're trying to watch videos on how to break into a safe and so they attempted to mess with my step dad's gun safe well since they did that and we're holding the lever the whole time they've messed it up where now the combination will not work the only other option is cut it open or calling a Safecracker for for $500 is there anything I can do to try to do it without having to cut open the side maybe even pop the lock if I can I don't know

[@24hrMrLocksmith]

Sounds like the forced or broke the handle. Not a hard job to open but will require a safecraker.

[@navycorpsman9291]

Mr. Locksmith 😝😝😝😝😂😂😂😂😂🎥🍿☝️

[@DadsTrucksBarn]

@@navycorpsman9291 I had forgotten I even a mention that yeah we ended up just cutting the back of the safe open unbolted unbolt it from the wall cut open the back pull the guns out and we replace the safe I tried to tell my step dad to make sure he had one with the back up Key

[@navycorpsman9291]

Matt Astbury ....You’re all right with the universe dude 👍🏼🤫

[@andrewaligula334]

Is the 1st time 1/2 a dozen or for 4 times…assuming a 1/2 a dozen means six?

[@loritrogdon3346]

I have lost my combination but don't know if its registered or not it is unlocked right now

[@adorewoodfloors]

remington rand safe cabinet its says yale on combination dail I have the numbers but can open it I have spin to right stop on 18, left 3 times stop 88, right 2 times stop on 38, left to 0 I have tried so many times any suggestion ? thanks

[@24hrMrLocksmith]

Terry Davis 4 x Left, 3 x Right, 2 x Left, spin slowly to the right to open (just past zero).

[@lorenzvictoranyayahan7806]

How do I change the combination if there is no key hole for change key? Any tips guys? thank you

[@mayravasquezq5637]

How I can fix the dial when got stuck I meant it is so hard to turn around every directions

[@24hrMrLocksmith]

Your safe combination lock is failing. If you get the safe open, do not lock and replace the safe combination. I recommend you call a locksmith.

[@Silentfrowny]

What is the change key multi-tool?

[@24hrMrLocksmith]

+Silentfrowny KDX makes the Safe Change Key Tool

[@CaliMaxe]

@@24hrMrLocksmith I tried to look up that company on the internet but couldn't find it.

[@jamesspohn992]

What if you don’t know the original combo?

[@24hrMrLocksmith]

@@jamesspohn992 if the safe is open, very easy to align the Gates and reset.

[@lenguyenbach7794]

where can I buy this mechanism???

[@michaelclayton2330]

How to drill open a chubb combination lock

[@24hrMrLocksmith]

They can be difficult :-)

[@mariasisk249]

Dont know the brand name it's old n my brother died so idk the combination. How do I recover it? Plus it's got 3 dials

[@24hrMrLocksmith]

Maria Sisk Send a picture of the safe and a closeup of the safe dial(s) to your local locksmith.

[@hatzbyhatzby2331]

How to open combination dial sentry safe MSO 200..PLEASE

[@usvet2]

Is this the same for a safe with a key

[@24hrMrLocksmith]

It depends on the Make and Model

[@mrclox]

Jeeeeez

[@jacklandis8670]

How about a Sentry 5130 with forgotten combination?

[@Exodiac47]

How do I change a xl sentrysafe's combination?

[@24hrMrLocksmith]

Its a pain lol. Check out your owners manual or go to the Sentry Safe website or call your local locksmith.

[@dusterdude238]

[sounding like Kenny Rodgers ] "turn it once, Twice , three times to numberrrr"

[@if9365]

I forgot my combo for my stack on comb lock. Anyone know how I could reset, access it etc....door wont open

[@kewintaylor7056]

Use drill combo with a crowbar and hammer... If its wont work call for a keymaker...or use gun combo.....lol ( ≧Д≦)

[@kandygurl1310]

🎶36 24 36, oh what a winning hand. She's a brick. House, she's mighty, mighty, just letting it all hang out🎶

[@Jewell25]

Mine doesn't have a changing mark thing

[@24hrMrLocksmith]

Different safe combination locks use different methods to change the combination.

[@priyankagoyal2302]

But how to know the numbers?

[@24hrMrLocksmith]

@@priyankagoyal2302 Another video :-)

[@priyankagoyal2302]

@24hrMrLocksmith Where?

[@kayekeith886]

How can I open a Sentry safe if I've lost the factory code?

[@BimbusBucklenuts]

+Kaye Keith Go to their website and fill out their online form, requesting a combo/key.

[@yamommasbox]

Circular saw

[@biancodennis5132]

if i forgot the code hw do i open it

[@24hrMrLocksmith]

You will need to call a local locksmith

[@mid-west_man]

Mr. Locksmith Great video, I have a Lagard lock on my safe and the combination changed by one number during a move across the country, after watching your video I ordered a change key and will be changing the combination to a new one, thanks to your help.

[@dwyer4000]

36-24-36 Hey, I lead a life of crime!

[@ericjoslin6589]

I hear dirty deeds are still reasonably cheap.

[@kalkarhipaulin9759]

What's the default combination code for godrej??

[@maricarreyes6726]

I can't open please help me

[@24hrMrLocksmith]

Contact your local locksmith to open.

[@christmas9lights]

20-40-60

[@karenkaren8031]

Open a combination lock without knowing combination

[@lucamcmanus4136]

hey

[@adorewoodfloors]

can not open it !!!

[@loritrogdon3346]

I have lost my combination but don't know if its registered or not it is unlocked right now

[@kalkarhipaulin9759]

Hey