How to easily disassemble a Proform treadmill or NordicTrack treadmill to move it

Рет қаралды 93,654

11 ай бұрын

The easiest way to take apart a NordicTrack treadmill and ProForm treadmill to move it or get it through a doorway.
This also works for FreeMotion and Healthrider treadmills

Пікірлер: 57

@tonyd8822 3 ай бұрын

thanks so much for the instructions. i didn’t know how I was going to relocate my treadmill to another area of my house and your instructions were easy to follow and very doable. Thanks again!

@FitnessEquipmentHowTo 3 ай бұрын

No problem at all, happy it helped 🙂

@vixendiver222 2 ай бұрын

Thank you this video was very helpful and thorough.

@FitnessEquipmentHowTo Ай бұрын

Glad it was helpful!

@alisonbuno5160 22 күн бұрын

Great instructions, thanks so much !

@FitnessEquipmentHowTo 22 күн бұрын

No problem, happy it helped 🙂

@michaelsylvester3968 2 ай бұрын

Thank you for posting this helpful video!

@FitnessEquipmentHowTo Ай бұрын

Glad it was helpful!

@johnmorton9961 4 ай бұрын

This helped me get my treadmill in and out. Thank you for this!

@FitnessEquipmentHowTo 4 ай бұрын

Awesome. Happy to help 💪

@morglag800 2 ай бұрын

perfect video, thank you so much!

@FitnessEquipmentHowTo 2 ай бұрын

Glad it helped! 🙂

@firesidecode9065 7 ай бұрын

Made moving my treadmill easier than I expected. One tip. The grommet for my pass through was stuck so I had to go on the inside and push the pins in.

@FitnessEquipmentHowTo 7 ай бұрын

Awesome, happy it helped 💪

@Patrick-qi3ws 5 ай бұрын

Fantastic tutorial! Thanks!

@FitnessEquipmentHowTo 5 ай бұрын

You're very welcome!

@duck705 Ай бұрын

hello, so “supposedly” we have the exact same treadmill however our motor board looks different. is there anyway of trouble shooting this?

@FitnessEquipmentHowTo Ай бұрын

There are 2 different types of controller but they both have a main connector and wiring harness. Just follow the wiring from underneath and you will see it. Same process, different type of plug

@thedoctorate 9 ай бұрын

Perfect! Thank you sir.

@FitnessEquipmentHowTo 9 ай бұрын

Very welcome, happy it helped 💪

@williamewing7124 3 ай бұрын

You forgot to mention the 2 screws that are underneath holding the 2 back corners of the motor cover down , you didn't mention so when they would not lift up I gently pried upwards thinking that it there was some kind of clip that would release or disconnect but nope I snapped the 2 female ends of the plastic that those screws screw into, in order to reach these 2 screws you have to lift the deck in the upwards (transport position) to access them . Luckily after i reassembled everything those 2 corners sit flush anyway but i am going to get some good glue or epoxy that bonds well to plastic and repair it back to original condition . Thanks for the video though as everything was accurate and it was simple to disassemble and reassemble .

@FitnessEquipmentHowTo 3 ай бұрын

That’s a shame about the screws, unfortunately there are hundreds of models of these treadmills and only a handful have the screws underneath. Did not think to mention it in the video as the one used for the video doesn’t have them 🙂

@jl5512 5 ай бұрын

Great job!!!! Thanks!!

@FitnessEquipmentHowTo 5 ай бұрын

Happy it helped 💪

@AndyBaylor 2 ай бұрын

Thank You!!

@FitnessEquipmentHowTo Ай бұрын

You're welcome!

@luisdiegoamadorrodriguez3289 10 ай бұрын

Master !!! Thanks a lot

@FitnessEquipmentHowTo 10 ай бұрын

No worries, hope it helps 💪

@tungsogalleryyoon-dongpark5231 7 ай бұрын

Perfect!!! Thank you!!!

@FitnessEquipmentHowTo 7 ай бұрын

You're welcome!

@Athiarnadeantrocaire 3 ай бұрын

thanks so much

@FitnessEquipmentHowTo 3 ай бұрын

No problem, happy it helped 🙂

@alpha4786 10 ай бұрын

Hi! I have a question about the Proform treadmill carbon T7 model: FBTL87723.2. When I wanted to start the workout it keep saying "please replace your key to start the workout" even tho it already in the console and I try to unplug it and turn off but it still said the same thing. So do you have any idea that's I can fix that error?

@FitnessEquipmentHowTo 10 ай бұрын

That’s going to either a wiring problem or a problem with the safety key housing mechanism. Doing a reset won’t fix that unfortunately.

@bennyvargas539 8 ай бұрын

Thank you!

@FitnessEquipmentHowTo 8 ай бұрын

Happy it helped 💪

@stizolac 5 ай бұрын

Is this the same procedure for norditrack 2450? And do you recall the socket size for upright/base frame bolts?

@FitnessEquipmentHowTo 5 ай бұрын

Yes same procedure. The newer 2450s have a connection at the base of the upright which is easier to take out. The socket size is 14 🙂

@stizolac 5 ай бұрын

@@FitnessEquipmentHowTo I'm not sure of the year, but I might be referring to the previous model. 14mm as well? I appreciate it

@FitnessEquipmentHowTo 5 ай бұрын

@stizolac that’s all good, yea 14mm 🙂

@stizolac 5 ай бұрын

@@FitnessEquipmentHowTo awesome help. ✌️

@chicorules28 Ай бұрын

What kind of strap did you use to hold it together??

@FitnessEquipmentHowTo Ай бұрын

We use ratchet straps/tie downs. You can use rope etc but have to make sure it’s 100% secure, I can’t stress that enough. If it’s not secure and let’s go the gas strut will release while you are moving it. For extra safety you can remove the gas strut beforehand.

@chicorules28 Ай бұрын

@@FitnessEquipmentHowTo thanks!! Ended up removing the gas strut for extra safety. Will be coming back to this video for the re-assembly.

@davidfizzano3356 4 ай бұрын

I just did this with my treadmill. It's the same brand, newer model. I reassembled everything and turned it on but for some reason the track won't work. Everything else works including the incline, but when I try to turn the speed up, nothing happens.

@FitnessEquipmentHowTo 4 ай бұрын

First place to start is check all wiring is ok, check motor connections and check all pins in connectors are ok. Failing that it could possibly be an issue with the controller.