NordicTrack Commercial 1750 Runners Flex Treadmill DIY Assembly | Step By Step Assembly Instructions

NordicTrack Commercial 1750 Runners Flex Treadmill DIY Assembly | Step By Step Assembly Instructions.
Hello everyone! Welcome back or welcome to Mastering Mayhem if it's your first time here. If you purchased or are considering the purchase of this NordicTrack Commercial 1750 Runners Flex treadmill I hope this video helps in that decision as well as helping you decided whether or not you want to assemble it yourself or hire someone to do it. I appreciate you watching and supporting the channel and I hope this video helps you one way or another. If you enjoy the video and find it useful in any way, please show your support by liking, sharing, commenting, clicking the notification bell and SUBSCRIBING. Until next time, I only hope all the best to you and yours.
Don't forget to enter the Huge On-Going 2021 GIVEAWAY! Subscribe to the channel and comment on this video to enter the GIVEAWAY: • Video
Tips and/or donations for maintaining and growing the channel are greatly appreciated: paypal.me/MariusContra
If you like custom pocket knives and want to see how this is done, check out my brothers KZbin channel here: / @knathansknives
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️ (Always click links to see the latest prices on items. Amazon prices fluctuate)
NordicTrack Commercial Series 10" HD Touchscreen Display Treadmill 1750 Model + 1 Year iFit Membership - $1,998.00!! Amazon's Choice
amzn.to/36b9Rfp
M12 Fuel 1/4" Hex Impact Driver Kit Hard Case 2 - 2Ah Batteries & Charger!
amzn.to/36eY3bS
Milwaukee Electric Tools 2504-22 M12 Fuel 1/2" Hammer Drill Kit 2Ah & 4Ah Battery!
amzn.to/39hWGLs
Makita B-51873 Flexible Impact Bit Holder, 12"
amzn.to/3a5H78X
EQUIPMENT I USE FOR MY VIDEOS:
New Apple iPhone 12 Pro (512GB, Graphite) [Locked] + Carrier Subscription
www.amazon.com/gp/product/B08...
Canon EOS M50 Mark II + EF-M 15-45mm is STM Kit Black www.amazon.com/gp/product/B08...
K&F Concept 72 Inch Camera Tripod, S211 Transverse Center Column Aluminium Professional DSLR Tripod with 360 Degree Ball Head,Quick Release Plate,Detachable Monopod 10kg Load for Travel and Work
www.amazon.com/gp/product/B08...
Rode DDC-GO DeadCat Go Artificial Fur Microphone Wind Shield for VideoMic GO
www.amazon.com/gp/product/B00...
ChargerCity Pistol Grip Stabilizer Tripod Handle Mount w/Holder for Apple iPhone XR XS X 8 Plus Samsung Galaxy S9 S10 Note Smartphone (Max Opening of 3.25") w/Free Micro SD Memory Card Reader
www.amazon.com/gp/product/B00...
#masteringmayhem #nordictrack #treadmill

[@ma.augustaresende3016]

My husband and I just finished putting our treadmill together. We followed your video and it took us 3 hours. If we had followed the manual instructions it would have taken us all day. Nothing like a step by step visual. Thank you very much.

[@MasteringMayhem]

You’re very welcome 🙂✌️❤️. Thanks for supporting the channel.

[@jayskillz88]

Just finished putting my 1750 together and man I just wanted to say thank you I followed your steps and had no problems. Thanks a lot

[@MasteringMayhem]

You’re very welcome. Thanks for supporting the channel. Enjoy that new treadmill. Don’t forget to enter our power tool giveaway if you like tools. I hope you and yours are doing well 🙂✌️❤️

[@jayskillz88]

Putting mine together today great step by step tutorial

[@jduasvte2436]

That is the best placement of the hardware I have ever seen 👍 great video

[@tammymartin5743]

We watched your video twice before beginning assembly. It was sure nice to feel confident about what we were doing because of your detailed explanation and demonstration. That screw lay out was a blessing too. Thank you

[@MasteringMayhem]

Glad to help. Thanks for supporting the channel and enjoy your new treadmill 🙂✌️❤️

[@absomarvilla1987]

I'm taking delivery of my NordicTrack Commercial 1750 today :-) thanks for this video I will consult it in assembly today thank you again :-)

[@MasteringMayhem]

You’re very welcome. Thanks for the support. Enjoy your new treadmill 🙂✌️❤️

[@absomarvilla1987]

A man and his wife delivered the NordicTrack and assembled it for 50 dollars, I am so grateful to them. I couldn't believe how massive it was and it weighed a ton. It's very impressive thanks to NordicTrack for the 1750 Commercial Treadmill. Plus after the day I had.. I did my very first mile on my new treadmill and I am happy. Thanks for your video :)

[@meanstoandend]

Lol. I just finished the g12 set up and was wondering how to set this up and low and behold you made a video for this too! Thanks so much again!

[@MasteringMayhem]

You’re very welcome. Thanks for supporting the channel. 🙂✌️❤️

[@michaelbuffalomusic]

Awesome presentation. Thank you!

[@julianrodriguez5205]

Great video for install. He went step for step also with the Manuel great treadmill as of right now. Thank you for the help!

[@MasteringMayhem]

You’re welcome. Thanks for supporting the channel

[@dalvincamacho9023]

I’m planning getting this treadmill, this video helped make that decision a lot easier. Thank you so much !

[@MasteringMayhem]

You’re very welcome. I hope the assembly goes well for you. 🙂✌️❤️

[@jandross786]

Awesome Video. Just bought one and go it assembled an hr ago with the help of this video. It's heavy, Just sayn'! LOL! I love it so far!

[@johnmolaison7637]

My treadmill should come in today or tomorrow. Thank you for the video, I will use your instructions.

[@MasteringMayhem]

You’re very welcome. Let me know know how it turns out.

[@janetwagner8616]

Hubby and I just got this same exact treadmill. Need to have it put together now. So excited. Can’t wait to get on it and do live classes and walk in Hawaii. lol

[@adamj2683]

How do you like it??

[@louisd95714]

I have the same exact treadmill, and had it asembled two weeks ago. I am loving it. But I had a company put it together. Judging from the front bars, looks like you also got the 2021 model.

[@mdickey83]

We bought this model preassembled and had to take off the top and tray to get it into the room. This video was very helpful. Thanks!

[@MasteringMayhem]

You're welcome!

[@georgerodrigues7679]

Thanks for the instructions 👍👍 We installed ours today

[@MasteringMayhem]

You're very welcome. Thanks for supporting the channel. 😊✌❤

[@joannaa.542]

Best video out there!

[@mattmgarza]

Thank you for this video, sir

[@sinasima7248]

wow hats off to you, assembling the top to the treadmill was an absolute nightmare for me, never again.

[@MasteringMayhem]

Sometimes it just kicks your butt. I’ve had a few assemblies for my clients that got the best of me. It’s tough when you don’t assemble them all the time. After I assembled about 5 I started to get the general idea of what the different manufacturers expect from the installer. Glad you got the treadmill assembled though. Don’t forget to enter my power tool GIVEAWAY, it’s live every Saturday night.

[@nicholassmith1240]

Very helpful presentation. Here’s my problem... I got all the way to the step to install the hydraulic placeholder and did so. Then I eased the mat down gently to floor thinking I was all but done just knowing I had a few bolts or screws up front to tighten. However as I lowered the base to the floor the console came along too and I suddenly had the entire weight to lower to a resting position on my floor. Watching that part of the video now I see that you stepped in and depressed something w/ your foot (I did not). The equipment is now in a sort of closed position with all 300 lbs and no hydraulic help available. Any advise for resolving this and what did I do wrong? Thank you.

[@joshfirlotte]

Really good video! Can you adjust the flex to make it more or less?

[@nerdymra8252]

I bought my wife a treadmill a couple years ago (Sole F-series), moved it into our basement by myself in the box. Bad idea. They are way heavier than they seem. I told her if it ever breaks and can't be fixed I am sawing it into pieces. 🪚

[@LyndonPatrickSmith]

Great video - the camera angles and time lapses were perfect! A couple of things - I believe the manual tells you to adjust belt centering with the left Allen key only. You only use the right one (in conjunction with the left) to loosen or tighten the entire belt. You only adjust both Allen key bolts if the belt is slipping, squeaking, or you want to lubricate it. Also the manual recommends tilting and moving the treadmill by placing your foot against a wheel to tilt it - not the front bar. It’s safer because you aren’t under the machine as much & have a better angle when you pull it back over you. Did you mention that the first 8 screws you put on (the ones that hold the uprights to the base) are the last things that get fully tightened? NordicTrack suggests leaving them hand tight until the console is firmly attached and the rest of the assembly is completed. But these are details - once again - excellent video! I’ve assembled one NordicTrack treadmill and have to do a C1750 so I appreciate this - thanks.

[@tammymartin5743]

Thanks for the extra tips. We are just assembling now

[@Putin_Playbook_12345]

Thank you

[@MarkSimmar]

thank you

[@moxypoxy5710]

If it wasn’t for this video that thing would never have been assembled. Thank you!!!

[@MasteringMayhem]

You’re very welcome. Thanks for supporting the channel 🙂✌️❤️

[@alaincomtois34]

hi, you look to have a good thick rubber carpet in your garage, where did you by this ?

[@micahferguson5059]

I didn't see which tools you used to tighten the screws?

[@JR123JR8]

Any tips on disassembling this thing for a move? I’m thinking just 2 big pieces. The deck and the upper assembly. Is it a bad idea to drop the cable that connects the two back through to the bottom? Would I be able to use a long thin wooden rod to get it back up to reassemble it? I haven’t started yet but how hard should it be to remove the base shield covers? They just snap together correct?

[@MasteringMayhem]

It’s been a while since I assembled this one. Dropping that cable should be no issue bringing it back up though. 🙂✌️❤️

[@pkny9394]

My motor some noise at level 1, like something inside and it goes away once at level 2 or higher. Wondering have you encountered such thing. Thanks

[@nargesalove228]

Can I skip putting the barrel?

[@1946jeeplover]

Just bought this exact one looking forward to assembling it great video

[@MasteringMayhem]

Congratulations. Let me know how the assembly goes for you. 🙂✌️❤️

[@geak5994]

At what point did you tighten down the arms? I can not tell if the bolts are tight after installing the cross arm. I bought a used 1750.

[@geak5994]

I figured it out. Cancel request. I had to mess with the arms to get my panel to fit.

[@geak5994]

Around 10:45 time. Thanks.

[@-Quisp-]

I just purchased a used '22 1750 Commercial, and when I turn the cushion knob on the side to either On or Off, it doesnt appear to turn the mechanism at all. Definitely no locking or unlocking, when I lift the board in the upright position to check when Im turning. Any idea how to remedy?

[@-Quisp-]

Nevermind. I just didnt turn it far enough. It moves now.

[@mattmgarza]

Finger-tightening everything first and then tightening in a diagonal pattern----this guy has done this a time or two.

[@chetcaruthers8612]

Also, run the bolts into the receiving holes before assembly. Paint can clog the threads enough to make finger starting difficult.

[@misein1]

@@chetcaruthers8612 . Exactly right.

[@VijayPatel-nj8xs]

I have 1750 but some reason it stop inclining upward. As soon as machine it start it goes down ward to -3 setting and never incline. I have tried to incline more and see if that help but it didn't. Any suggestion for solution. Right now, i have manually set it is on 0 and remove incline motor cable so it does not go down. Love to fix so i can use inline function. Any video that i can watch.

[@MasteringMayhem]

It's difficult to diagnose remotely. Wish I had an answer for you. If I come across anything, I'll send it your way.

[@VijayPatel-nj8xs]

@@MasteringMayhem Thanks

[@davido1503]

This treadmill was a pain to assemble. Particularly installing the console at 12:02. I couldn't get both sides to line up perfectly.

[@jasonturner7159]

We have the same treadmill but I got a green wire which u don’t have so I’m very confused

[@jasonturner7159]

10:44 part in the middle I have a green cord?

[@SangKtan]

How you turn on and off

[@MasteringMayhem]

There’s a power button at the bottom front of the treadmill.

[@geak5994]

My 1750 does not have the Bluetooth connection to iPad or iPhones. I’m bitter about this.

[@MasteringMayhem]

I would be too 😞. You can still get great workouts though 🙂✌️❤️

[@geak5994]

@@MasteringMayhem 1750 is impressively quiet but that is out right slimy of NordicTrack.

[@eugenew4665]

Hart combo kits 100$ at wallmart massive steal if anybody in that platform,,, battery charger included

[@MasteringMayhem]

I’ll look into that one. Thanks.

[@eugenew4665]

People already out grabbing them,,just found this video

[@GILLETE32]

First thing the manual said.," Do not use power too". And even you using power tool this video is too long.