How to Engrave Wood Using a Diode Laser - Definitive Guide

[@MellowpineLasers]

Join our Facebook community for endless laser learning, project inspiration, and sharing: facebook.com/groups/mellowpinelasers/

[@marshallmndlovu5069]

Thank you for the video content, very useful.

[@MellowpineLasers]

Glad it was helpful!

[@PhilippeLhoste]

If I hadn't already liked the video (for the informative content right from the start), I would have just of the Stanley / Stan Lee joke. Excellent! And, of course, great information as usual.

[@MellowpineLasers]

Ha ha, great. If you have ideas to make my videos more interesting do share them with me.

[@OzcroEUC]

Great info Bud.... How do i import 20W test file into lightburn ???

[@LarryDMitchell]

Great information for us newbies. Thanks

[@MellowpineLasers]

You're welcome... Will post more soon

[@RK-Teknik]

Thank you very good and educationel video i just Got my longer 5 10 w and im looking forvard to see and learn from your videos. I recommend your Channel to every new laser owner.

[@MellowpineLasers]

Glad to hear that! Keep learning, and enjoy your laser journey.😊

[@jjdominguez4616]

Thank you for teaching us something new in each video. they are well done and accurate.

[@MellowpineLasers]

My pleasure!

[@thebosun181]

Thanks for all your hard work. I appreciate it!

[@MellowpineLasers]

Just trying to help... :)

[@pijanysamuraj]

Really like your chanel, got myself 5.5w and you are helping a lot

[@MellowpineLasers]

Cool, glad to help

[@kkyl5175]

Great video, very concise and informative ❤

[@MellowpineLasers]

Thank you ❤️

[@marshyshark1]

Very helpful advice, thank you. Have subscribed and will be looking into the 7-Day course, time permitting. 👍

[@marshyshark1]

Complete beginner with a Creality Falcon 2, 22W

[@MellowpineLasers]

Glad you liked it. Thanks for subscribing. 😊

[@MellowpineLasers]

Nice laser to get things started. The 7-day course shall help you understand the basics of the lasers, the design phase, and the laser parameters. I'm sure you'll find it helpful to get started with your projects. 🙂

[@squidskunk]

question... can a laser be used to cut a channel in to wood in order to inlay silver wire into the channel ..?

[@MellowpineLasers]

Yes you can do it using a laser, a CO2 laser would be best for this, you'd get more depth using a CO2 laser. What's the depth you are looking at? width of the channel? and what wood are you using?

[@squidskunk]

@@MellowpineLasers the wood is walnut the wire size would depend on the channel the laser is capable of making...

[@divchief07ut]

How do you complete the finishing of the epoxy inlay sign?

[@MellowpineLasers]

I sand the surface to remove any excess epoxy from the surface by sanding the workpiece using sandpapers of gradually increasing grit-size until I get the desired finish. After that, if needed, add a clear coat over the entire workpiece.

[@DGLaserCraft]

Well done - thanks!

[@MellowpineLasers]

You're welcome! Glad you liked it.

[@slpsatheestamil2546]

Great information Thank you!

[@haxensalat]

Did you also engrave the knife from 6:50?

[@MellowpineLasers]

Yes, you can watch it here: kzbin.info/www/bejne/e2rPoYGZd694raM

[@haxensalat]

@@MellowpineLasers nice, searched the video in your list but couldn't find it, thanks.

[@medina3420]

So you don't use Borax soap and water on wood? dark burn.

[@MellowpineLasers]

No, I never do it.