How To Fix A Caved In Fender With Slide Hammer DIY Body Repair On White Chevy Silverado Pick-Up #chevrolet #fender #bodywork
Пікірлер: 78
@brycemaggio6144 Жыл бұрын
I think this is the first time I’ve ever seen a body work short without 3k in specialized tools. Big 👍
@OldBondoBilly Жыл бұрын
Skill trumps fancy tools (but if somebody wants me to review some fancy tools, send’m over)😁😁
@billyelliot414111 ай бұрын
@OldBondoBilly Billy managed to refine skill from pure cop on in 1976. Its available for 9.99 from all convenience stores nationwide. Its called eau de Billy. 😂
@timothyhead183211 ай бұрын
You are awesome 😊
@flybynytt Жыл бұрын
I'm a retired ancient body man. Thanks for sharing your work! I appreciate your "Good ol fashioned" style of getting things done without an anchor in a floor pot or a 20T puller. I used a Winnebago once to pull out the front end of a Ranger that kissed a pole. I get it.
@OldBondoBilly Жыл бұрын
Get’r done!😁😁
@corvairjim111 ай бұрын
For me, it was an old tow chain wrapped around a phone pole to pull out a fender knocked back an inch or so, jammed into the passenger side door of a '76 Buick LeSabre. Had it pulled out enough to clear the door and look nearly normal in about 2 minutes.
@vampirel19836 ай бұрын
One of The best body repair video out there. Fack those aholes with $3000 tool trying to repair a minor dent and call themselves experts. 99% of ppl don't have those
@OldBondoBilly28 күн бұрын
They just keep quacking... Did you SHARE MY SHIZZLE?
@davidjennings990711 ай бұрын
Damn bubba you are pretty good reminds me of my uncle Richard right on
@edsmachine93 Жыл бұрын
Knowledge, knowhow and Technique. You have been there and done that before. Thanks for sharing. Take care, Ed.
@OldBondoBilly Жыл бұрын
Hey Ed, I’ve been around and around and around the block😁😁
@3Amobilemechanic Жыл бұрын
I’ve subscribed dammit
@OldBondoBilly28 күн бұрын
Did You SHARE THE SHIZZLE?
@annaleeputman85918 ай бұрын
😂😂 love this it made me subscribe and laugh after finding out exactly what I needed 😅😂
@OldBondoBilly24 күн бұрын
Thank you...Tell them to SHARE MY SHIZZLE!!!
@KarlsCracklingCottonMouth Жыл бұрын
You show good restraint fighting your narcolepsy in this video.
@wacoldestv1704 Жыл бұрын
Now that's a experienced gem! Thanks for that . That's new too me
@OldBondoBilly Жыл бұрын
Glad you enjoyed it, stay cold😉😁
@PhillipHall01 Жыл бұрын
New one for me too! Good stuff!
@OldBondoBilly Жыл бұрын
@@PhillipHall01 I need to quit putting stuff like this up. I’m scarin’ away muh trolls🤣🤣
@andrewcampbell-young842611 ай бұрын
Billy you're awesome sir 👏
@OldBondoBilly28 күн бұрын
Thank you... NOW SUSSCRIBE DAMMIT!!!
@josecera67765 ай бұрын
Sharpie is crazy
@Adventures-w-GrumpyOldMan Жыл бұрын
I did subscribe damn it
@OldBondoBilly Жыл бұрын
Bout dam time! Uh been pacing for months 🤣🤣
@CANAMROCKS1 Жыл бұрын
Man will you come to our shop and do some training classes. We need some B-car training!!! We wanna be Billy Platinum by the end of the year!
@OldBondoBilly Жыл бұрын
Will you put me up at the Motel 6 and stock the mini fridge with hot pockets?🤣🤣
@CANAMROCKS1 Жыл бұрын
@@OldBondoBilly Hell we’ll splurge and put you up at the Hampton inn and get you a golden coral gift card lol!!!
@patrickd6450 Жыл бұрын
Nice videos!!!!!!
@OldBondoBilly Жыл бұрын
Just for you buddy😁😁
@moparnut6286 Жыл бұрын
The mighty Quinn!!!
@OldBondoBilly Жыл бұрын
Lol😁😁
@markhatcher432511 ай бұрын
might see billy at harbor freight one day getting more Quinn tools 😜
@waylonbrown457611 ай бұрын
Ngl my door did the same thing so I just kept bending it when opening and over time it has destroyed my fender piece so really wish I would’ve seen how easy it could’ve been back then lol
@FarrellTree7777 ай бұрын
❤🎉
@caveman459811 ай бұрын
Some tape on the hammer head just sayin sir 😮😅
@paulbracker307311 ай бұрын
Billy, Where do you live, brother?
@anthonynapier466811 ай бұрын
👍 👍
@vaneshialovett447711 ай бұрын
What kind of tool is that to pull it out
@OldBondoBilly11 ай бұрын
It’s called a slide hammer. It has a 12 pound weight with a hole through the middle of it and slides back on the rod that the attachments connect to. If you have a serious damage, you could put a big hook on it and really bang it hard.
@oscargarcia84617 ай бұрын
What is that tool called ?
@OldBondoBilly7 ай бұрын
Scraper
@alexisortega35025 ай бұрын
I have the same issue with my car but I don’t have a slide hammer is there something else I can use to pop it out?
@OldBondoBilly5 ай бұрын
I don’t know I’ve always had a slide hammer😗😗
@michaelmireles245311 ай бұрын
What would it take to learn from you
@OldBondoBilly11 ай бұрын
Watch my videos or attend my upcoming classes😊😊
@maxwellduncan615010 ай бұрын
👍🏻👍🏻🖖🏻
@OldBondoBilly24 күн бұрын
Thank you
@CCAutoWorks Жыл бұрын
Do you have a fix for a Silverado that the wind cought the door and folded the door around into the door hinges I just bought the truck and it's perfect besides that one little hickey I don't really want to try to match the color to fix it the way I Know how to
@OldBondoBilly Жыл бұрын
I’d take the door off and put the hinges pins back in and use my 12 pound slide hammer hook to bang the hinges backwards so the door will fit right again😉. Oh; also new hinge pins, because you’ll probably have to cut the old ones to get them back out of the hinge…
@CCAutoWorks Жыл бұрын
@@OldBondoBilly the door still fits perfectly the problem is where the front edge of the door came in contact with the hinges it peeled the edge back
@OldBondoBilly Жыл бұрын
@@CCAutoWorks well, you’ll still have to take the door off and hammer and dolly that front lip back into shape🙂
@CCAutoWorks Жыл бұрын
@@OldBondoBilly that's kinda what I was thinking but didn't want to crack the paint anymore then what's already done thanks for the tips
@STAY-GOLD-VINYL Жыл бұрын
@CCAutoWorks Maybe heat it with a heat gun? Then use the slide hammer.?Billy B what's your thoughts?
@YoungBUG7168 ай бұрын
Fixed dent and left a bunch of scratches lol
@OldBondoBilly8 ай бұрын
Painted it after fixin🙄🙄
@Hypergames5559 ай бұрын
I have a jeep xj owned by someone who didnt want to let her live. Dont think thisll cut it
@OldBondoBilly24 күн бұрын
We've got something to cut it
@Antiquefarmequipment Жыл бұрын
It's a Chevy. You can just leave the dent! LOL
@OldBondoBilly Жыл бұрын
I take all money, Chevy or otherwise😁😁
@Antiquefarmequipment Жыл бұрын
@@OldBondoBilly yea ik. Just playin'
@andypanaro575111 ай бұрын
Is how about buying a spoon dolly
@OldBondoBilly11 ай бұрын
How about you just watch the master use the right tool for the job and don’t worry about playing with dollies🤣🤣🤣🤣🤣
@Steven-re3tx Жыл бұрын
Some tape on the door,.... please.
@OldBondoBilly Жыл бұрын
That’s what the putty knife is for; money waster🤣🤣
@Steven-re3tx Жыл бұрын
@@OldBondoBilly Prying on a painted surface is a fools errand.
@OldBondoBilly Жыл бұрын
@@Steven-re3tx be that as it may, I’m not prying on anything 😉😉
@Steven-re3tx Жыл бұрын
Stay off the panel that gets no paint. Simple body shop rules. ALLOFTHEM.