How to Fix a Snowblower Auger Gear [Part 2]

[@asertiv1]

This video is fantastic. I was tempted to buy a new blower, but your video, and about $50 in parts brought my old craftsman back to life. just in time for the next storm tomorrow night. Thanks!

[@EliminatorPerformance]

Glad I was able to help, thanks for watching asertiv1!

[@augustharlacher5660]

Thank you for this awesome video on how to replace a broken gear box gear! My son-in-law's craftsman snow blower is only 1 year old and already have to deal with this kind of repair. But we have a gravel driveway so it's to be expected. So, I guess I have some work to do. I'm a retired auto mechanic, but by watching your video I'll GET-ER-DONE! Thanks again for part 1 and part 2 step by step repair! WELL, DONE! 😎👍🙏

[@upagainstyou623]

giant thank you, back up and running saved me a ton of money and learned a lot.

[@philrader2016]

This video saved me a lot of headaches and time. The flat sections on the bushings is easy to miss and the housing of the wormgear will not go back together unless the bushings are setting flush. Thanks again this was super helpful.

[@EliminatorPerformance]

Thanks for watching!

[@williamdorsey2029]

We don't always give people like yourself the credit they deserve, Ten thumbs up for applying your tradesmanship to help keep things working..

[@MrAAok]

Just wanted to take the time to thank you for this video! Because of you I was able to repair my snowblower with the same exact problem! You literally saved me hundreds of dollars! Thank you!!

[@EliminatorPerformance]

Hey, thanks for watching, if you don't mind, leave me a Google review? Would definitely help me out, thanks again!

[@MrAAok]

Eliminator Performance you got it!

[@JohnJones-qs5yt]

One of the best how to videos I have ever viewed. This is a big job and I wanted detail to get it right . Thank You. I am certain I will view it a few more times.

[@EliminatorPerformance]

Thanks for watching, good luck on the repair!

[@derknorm8790]

Oh boy was this video and the first part helpful. Currently pulling mine apart right now

[@claudedesaulniers2300]

Thanks for pointing out those flat spots in there. I couldn’t figure out why my case wasn’t shutting properly.

[@SeanVanDuzen]

Fantastic video! New subscriber here from another Ontario snow thrower. Thanks!

[@edgoetz8303]

Thanks for the thorough description on repairing the auger housing. Very helpful and informative.

[@rogerbracken6225]

Excellent job. Your attention to the details of the job was very helpful. It really helps that you pointed out all of the details of the reassembly noting particularly the proper alignment of the parts to the case so that those of us following you (hopefully) will remember to look for that orientation before attempting the reassembly.

[@EliminatorPerformance]

Thanks for watching Roger!

[@freedom_dispenser94]

Thanks for the most informative video about this model, I have the exact same one and I was in fear it was the worm gear, spent about 45 minutes tearing it down step by step to your video and ordered my worm gear and grease! Big appreciation keep up the amazing work sir.

[@davidchizek8760]

I need to do the same job on a craftsman blower. Your video is wonderful. Saving my back side :)

[@EliminatorPerformance]

Just did one the other day, thanks for watching!

[@briangohr8888]

Thanks! This really helped me. I found the brass gear online for $12. The key way was too narrow, but I widened it and worked perfectly.

[@codywheten6242]

Thank you so much for the detailed breakdown of the gearbox! this made me feel mich more confident while repairing my blower!

[@michaelwittke8336]

Great job! FYI, the reason there is an inside and outside hole for the wheel retaining pin is for those that do a lot of turning, the machine will operate as if it had an "open differential" and they won’t be fighting a “locked” drive axial as they try to make turns

[@pkelly8816]

Absolutely spot on, professor. Well explained. Thanks.

[@bdawg8907]

Good demo for the rebuild. With the impeller out…. I’d have done the impeller mod at the same time since it would have been easy. I did the impeller mod and now my blower never clogs with slush and it made a noticeable improvement in blowing the fluffy stuff. 😊

[@KianaShalix]

Not going to lie I wish I had found your channel last year! I bought the exact machine and the guy before me has bolts in for the pins. Paid 150$ for it because the guy thought it was leaking gas out of the block but it turns out it was just a fuel line cracked and I thought I had won a little lottery but I guess I will see what happens when I get it running if the gear is pooched. I am hoping not! Great videos!

[@LeftyLen1961]

A very helpful video . Not too much time spent showing basic bolt removal but very thorough !!! Great real help. I now feel ready to strip mine down.

[@pastrana37]

eliminator thanks so much for your part 2 video auger gear box..i can't wait to look on my mtd yard snowblower my same issue..best explanation i ever see...thks thump up100%

[@EliminatorPerformance]

Thanks for watching!

[@brianmedeiros417]

Great video! The pin on the tire had two settings. My manual mentioned something about easy maneuverability during light snow.

[@EliminatorPerformance]

Yes, install a pin on 1 wheel to the outside of the wheel to allow it to spin. Both wheels pinned to the axle drives both like pozi in old muscle cars, better traction but harder to turn

[@brianmedeiros417]

Again, awesome video. Showing to my buddy so he can fix what he broke! Jeep up the great work!

[@TheDeuble4u]

love the vid. thank you. i do feel you used a lil too much grease.

[@EliminatorPerformance]

That stuff mixes around pretty good, still running today with no issues!

[@cubul32]

Thanks bud, from Montreal, QC, thumbs up.

[@karurbadrinarayanan9530]

Very good information and I have one question. Is it possible to reconnect axil of auger with out disconnecting the auger from the back of the snow blower. I have a condition where axil came off the bush due to stone or ice. Please let me know how to go about it. Thanks.

[@patrickmorin7693]

Great video and you speak very clearly. For those who have never done it, it’s a heads up to all the details important a mechanic must do. Such a job should cost 4 hours labour plus parts in my opinion.

[@EliminatorPerformance]

Glad it was helpful! Thanks for watching

[@nickpatrinos3823]

Really great detailed explanation of this type of repair. Very knowledgeable mechanic. Thanks so much!! Nick P. Milwaukee, WI

[@EliminatorPerformance]

Thanks for watching!

[@waynestefinashen239]

Excellent 2 Part Video especially pointing out the significance of the flats in the housing in relationship to the bushing flats. Without that information someone might break a housing if they did not realize they had interference. Presently Stens offers FREE shipping on orders over $150 Cdn but you need to set up a prepaid (credit card) account with them.

[@philliphall5198]

He is a great teacher and should be in trade school teaching

[@zaldybelsol9224]

Nice! The content is detailed. Thanks. Will try to fix mine..

[@932stretch]

Gotta do this on my Ariens. Was told the whole worm gear/shafts/gear-box had to be changed all at one time. Parts came to $275.00. Going to take mine apart to see what/which gear I need. I hope mine goes as easy as you made yours look. Wish me luck. Thanks, JIM

[@EliminatorPerformance]

Good luck, Jim!

[@javiergriffin5343]

"8

[@Goonies-xh3qr]

Any tips on how to break a seized/rusted auger free from the auger axle? I was able to get a pry bar in and break one side free, but the other side won't give. I bought a lower HP Craftsman for parts for my 9hp/26in snowblower that I completely destroyed the auger blades on.

[@thomaswilson5228]

same happened on my 9/26 axle is froze to one side auger. sheer pin ( nut and bolt) were rusted and froze. had to drill it out but still cant get axle to spin as it is froze to blade impeller. gear box and rest of machine is functioning fine. Hate to tear it down if I dont have to.

[@Goonies-xh3qr]

The left tire axle pin goes on the outside for light snow and ease of maneuverability according to the manual. I have mine through the inside as you were saying so both tires are gripping.

[@EliminatorPerformance]

Yes like the old pozi traction on muscle cars, I find it better when it's locked, and the snow/ice makes it easy enough to turn the snowblower. These are quite small units anyway, and I find them easy to maneuver.

[@PTucker0864]

That's the exact blower I have except 26". I had a shear pin break, but the propeller broke also on one side...mangled it! Was wondering how to get the auger assembly apart at the back.....this was perfectly illustrated! Thanks!

[@robofstein8181]

Nice job. I would add that you should grease or oil the auger shafts before installing the aluminum gear box shells. This helps protect the seals as you slide the gear box shells onto the auger axle.

[@johnbarone843]

Fantastic tutorial on how to DYI a 3 to 400$ repair! Keep them coming! I subscribed!

[@EliminatorPerformance]

Thanks for watching John!

[@mpeters5549]

Have you ever taken a different gearcase assembly and made it to fit on another sbowblower? My Toro 28" MaxHD worm gears are toast. Found a 32" on ebay that i maybe can cut down to make it work

[@1ronhall]

Nice work and nice video .... very thorough and professional repair ......

[@Ronaldo-ge3ty]

Great video, just in the process of refurbishing my old blower, made thing so much easier

[@EliminatorPerformance]

Thanks for watching!

[@Beautyfull-t2s]

You are very efficient !!!! Thank you again and again!!! 👍🏼👍🏼👍🏼👍🏼☕️☕️

[@TheBessie98]

I have the same exact model Craftsman 9HP, 26", so this was a fantastic and invaluable video on rebuilding the gear box. I've learned so much and hopefully repaired my machine on my own. I was unable to join the 2 sides of the snowblower alone, until the augur lever was depressed, which I may not have done, if you hadn't explained that. There is one thing. After everything was back together and tested, I noticed the augur blades kept turning, even when the augur handle was not depressed? Is there something I missed? Thanks again, I'm definitely a subscriber!

[@EliminatorPerformance]

Likely the cable for auger set with too much tension so the brake isn't engaging, or it's the belt that's too tight. Also check to make sure the idler return spring is still connected. If not, it won't pull back the idler pulley enough and the belt will stay slightly engaged.

[@Thenewtrend-z1g]

What grease did you put on the gear itself. Great job.

[@EliminatorPerformance]

White lithium

[@joehawthorn3018]

Very Good. I will be working on a similar blower come warmer weather. Its very rusty. Your video will help. Thanks

[@catherineelisecairns1097]

Great job

[@kfredj]

Helped me out greatly!

[@johnhouli3450]

Thank you. Stems 00 very hard to find at the local stores and not in big box stores. Can I use 90 weight Oil?

[@EliminatorPerformance]

A 75w90 cold weather oil should be fine if you can't get 00 grease, although any tractor store should be able to get 00 grease, maybe even a John Deere dealer.

[@johnhouli3450]

@@EliminatorPerformance hello we’ll I finally bought some grease 90 weight small amount wasn’t sure if I needed a large amount. When I got home today I checked the Aguer housing by removing that Square bolt. And I stuck a Q- tip into it. The thick grease was at the beginning of the opening it was like a dark Yellow or mustard color. It was packed. I tried to add a bit. Which came back out. So I said ok and secured the bolt nut back. Eliminator what I having trouble now is with a few things, 1. Getting it to run, 2. Getting 1st. C n 2nd, gear. 3rd and reverse I got good. 3, adjustment or the 2st n 2nd gear. Big storm heading my way tonight into tomorrow. I was able to get my Mechanic fix the skid he put a piece of steel on bottom same size as the other one. The 622 Power Trhow 6 ho from the year 2000 sat for. 6 years with the gas on. That carburetor on the Tecumseh was caked with fuel and the bowl was not silver more like chocolate in color. I was able to clean it all out and put it back and cleaned the idle jet. Today it finally started after trying for ten minutes. It stall when I try to ideal the machine what do you suggest Thanks Bud. Any suggestions

[@EliminatorPerformance]

Another carb clean is most likely needed if you didn't flush the tank and blow out the line, other than that, if it's adjustable carb, give it more fuel by unscrewing the bottom jet and the drive can be adjusted by either moving the rod further down, or further up, it should be threaded, think of it like a tie rod on a car

[@johnhouli3450]

@@EliminatorPerformance Thanks, I have adjusted the rod earlier. Not a adjustable it’s a fixed jet. When blowing snow is the engine throttle on full speed or 3/4.

[@johnhouli3450]

@@EliminatorPerformance how do I blow out the line? I do not have any air around. Also I did clean out the tank with a Turkey baster. I didn’t want to undo the lines. Eliminator can you tell me the size of the fuel line that goes on to the carburetor. Is it a standard size. Maybe I should just go to a shop and see what they have instead of my local hardware.

[@shawn5294]

Thanks for posting this video. It helped me out tons as I had the wrong shear pins in mine as well. I now have a new gear and the correct shear pins.

[@EliminatorPerformance]

Glad I was able to help, thanks for watching!

[@JV-up3fr]

Great job on video! I have a Deere TRS32. Neither gear is available from Deere. Anyone have any suggestions how to obtain replacement gears? OEM #'s are M45701 and M45702. Thanks.

[@EliminatorPerformance]

Thanks for watching, I'd try Amazon or eBay if you could.

[@swamijis1]

THANK YOU FOR AN EXCELLENT VIDEO, GREAT MANNER OF EXPLAINING ON HOW TO PUT IT TOGETHER KEEP THEM COMING GOD BLESS.

[@EliminatorPerformance]

Thanks for watching Bob!

[@932stretch]

Great Video. Just can't beat the old Tecumseh Snow King Engines.

[@EliminatorPerformance]

Thanks for watching 932stretch!

[@patrickmorin7693]

I have 2 snow king 10 hp set up on a custom blower but I have no part numbers. Could you provide me a compatible # please for gear box parts.

[@9793c2]

Hi Would you recommend 00 SuperS Cotton Picker from Tractor supply?

[@EliminatorPerformance]

Yes that stuff works great too, any 00 grease is good

[@edrodrigues5623]

Great video, Had the son take it out and ran over the lead cord that he used to start it. The impeller runs great but the auger very slow, if at all. Took the sheer pins off tonight and not the right ones, just bent bolts. I want to see if I can do this on my own. Excellent job.

[@valnaso8645]

Excellent Video!!

[@valnaso8645]

I am putting my gear assy back together today and replacing the front bushing, it does not fit onto the shaft and i do not want to bang it on as it will crack, any suggestions?

[@Wallace823]

Very nice work, we'll described. Customer has to be happy.

[@EliminatorPerformance]

Yes, he was very happy! Thanks for watching Wallace!

[@tdcurrie3579]

Both parts 1and 2 are great videos. Very informative.

[@EliminatorPerformance]

Thanks T&D!

[@troyg748]

Cool vid, and I see you're in Ontario too. I just discovered the same issue with mine. Was stored at a buddy's for 2 years. I got it back in not so good shape. Was brand new.....

[@EliminatorPerformance]

Cheers from Port Colborne 🙋🏻‍♂️

[@SuperSteeldrum]

Is it possible to replace the shaft. Mine snapped right at a sheer pin hole. I can only find the whole assembly with gear box.🇨🇦🇨🇦

[@EliminatorPerformance]

Yes, google your model number and search for the parts diagram. Then look at the parts diagram and the shaft itself should be numbered. You can then search for that part number

[@cwsrad]

Did you ever have to remove and replace auger gear box bushings/sleeves in each half of gear box case? If so, how did you remove and how is the oil seal kept into place on a Toro PowerMax 1028 OXE snowblower?

[@EliminatorPerformance]

I'm not sure how that gear box goes together on that model, I'd recommend going on Google and try to find yourself an illustrated parts list and see what comes up.

[@EliminatorPerformance]

But on this one, the sleeves and bushings were fine.

[@davidcoudriet8439]

Is there a video on fixing the reversing problem?

[@MowersNBlowers]

Good job Jake!

[@donniedoesit4958]

Good hearing someone using the correct terminology for the parts and description of repairs. Good job. Maybe you can help I believe I came across a '79 Magna Front Tine Tiller with a 5 horse Briggs can't find much info about this machine maybe you can help let me know thanks. Oh, can I buy a shear pin assortment pack?

[@EliminatorPerformance]

Thank you, I'll look into the Magna Tiller and see what I can find. As for the shear pins, yes you can buy assortment packs, maybe try Amazon, we got ours at STENS.

[@EliminatorPerformance]

www.tillersdirect.com/stories/395-How-to-Access-Old-Rototiller-Manuals.html

[@donniedoesit4958]

Thanks that'll be helpful. I'm a painter by trade and do this in the winter. Mowers and anything with an engine. I remember times when I wouldn't nothing but five or six years old my dad and I working on mowers. Good Times. we especially liked the ones where the flywheel key was sheared people thought it was junk.

[@robertcasserly9967]

Nice job perfect!

[@davidcoudriet8439]

Looks like you painted the rusty spots; nice of you to do that!

[@EliminatorPerformance]

Yea for something so inexpensive, my customers appreciate it! Thanks for watching!

[@andrewmorrison6709]

What shear pins did you end up using?

[@kennethbiswabic8602]

An excellent video! Thank you very much! I do have a question however... In part two, when you're reassembling the gearbox, the worm gear is already covered with a white grease. What type of grease is the white grease and why why did you need to use it instead of just the STENS "00" that you used in the rest of it?

[@EliminatorPerformance]

It's a Lithium grease, I reused some of the old stuff that didn't have metal shavings in it, it works good too

[@kennethbiswabic8602]

Thank you very much for the speedy response! I currently have mine disassembled for the exact same problem. I've already completely cleaned out both halves of the gearbox shell with brake clean because it was a complete disaster. Brass dust and shavings everywhere! Reusing any of the existing grease was simply not an option. Thanks again!

[@TonyJordan987]

Some greases are incompatible with each other and can actually harden the mixture of greases or make them lose their viscosity. If it's all in the same housing I'd stick with the same type.

[@AquarianDiary]

Excellent tutorial. I appreciate all the detailed instructions.

[@nickc8760]

Do you ever have to change the 00 grease. ??

[@hitwithanattitude1]

Hey Eliminator, at 9:10 what is the light gray grease on the new gear? Thanks

[@EliminatorPerformance]

Lithium Grease! I usually use some of that on the gear itself, but you don't necessarily have to... The 00 grease should be good enough!

[@chichuaxyiong7803]

Great demonstration. Thanks for sharing the video.

[@EliminatorPerformance]

Thanks for watching!

[@TheSqoou]

Thanks. We're down on just the other side of the pond and needed exactly this tutorial.

[@EliminatorPerformance]

Thanks for watching!

[@z978ady]

Do you know if slightly bent auger shaft can be straightened with a hydraulic press? It is a 1985 sears 5/23 replacement parts are not easy to find. I am assuming the brass gear in the video is pretty standard and still available online, as well as auger bearing that is at the back of the housing.

[@samuelcartagena3002]

Good explain

[@davidpatterson5728]

WOW, THANK YOU!!! What detail you provide. I just picked up a MTD 8x26" blower with a busted auger. Not ever done one before I'm waiting for the gear box. This is a 1994 blower, very well cared for. There is NO gasket between the two halves. Seems odd, but do you know if back then they were built that way? I was given a CUB CADET 28" blower, big hole in the block. For my limited knowledge all else appears good. I was looking to get a predator replacement engine, trying to keep cost down as much as possible. I want to give one away to help someone out. A friend has a TORO, tracked 3 stage. It has set outside for at least 3 years. The thing started right up, runs a little rough but runs. It probably doesn't have 4 hours on it. The linkages are messed up, due to setting out no doubt. It doesn't seem to go through the snow worth a crap, it blows and in forward gears goes fine but a wheeled unit seems to have a lot more balls than this does. How do the gearing work? Are they like a pressure on the pulley? Never owned a blower so have zero experience in this area. Again, I thank you for your knowledge, and for taking the time to produce such high end instruction!! Dave in Vermont, 100% off grid for 43 years and counting

[@EliminatorPerformance]

Thanks for watching! It has a friction wheel drive underneath!

[@bones987123]

any snowblowers with a steel gear instead of soft metal like brass gear?

[@truenorthmuskoka9077]

My John deer riding mower with 44 inch blower has an issue. It started making a loud grinding noise. I thought it was the gear box but when I took it apart the gears were ok. Must have been a rock between the impeller and body. Anyway I did find a few small metal bits in the gear case but I cant figure out what its from. Looks like it used to be shaped like a hollow tube. Could this be a pin spring? I have no idea where it would go. Anyone know

[@josejimenezcaceres5277]

Hello, thanks for the video. My machine has that damaged part. I don't know what brand it is, it says Stanley 30” but I'm looking for that part by that brand and I can't find it. Could you help me?

[@scottWILSONvtbeekeeper]

Does brass shavings in the housing indicate worn gear? The second stage spins powerfully but the first stage is anemic (almost like I could grab the first stage with my hand and stop it). The worm gear looks good and the brass gear has all the teeth with almost all of them the same height and looks similar to the new one in the video. Could they be worn down enough that a good positive meshing with the worm gear is not occurring? Also, there was a bent shear pin that I had to hammer out.

[@EliminatorPerformance]

Yes most likely this is a sign of damage. If you have a bent shear pin, it means it didn't shear and transferred some of that force.

[@scottWILSONvtbeekeeper]

@@EliminatorPerformance Thanks, so essentially there was a meshing but not sufficient enough to maintain proper rotation.

[@EliminatorPerformance]

Yes most likely. These augers spin incredibly fast so you have to have everything perfect. The worm gear is slightly dished to allow the worm shaft to rotate, usually the damage starts in the middle of the worm gear. Normally the worm shaft (hardened steel) doesn't get damaged, but sometimes I've had to take a file to them to clean them up

[@scottWILSONvtbeekeeper]

Have you done a video on snowthrower engine surge. That is next issue to resolve

[@EliminatorPerformance]

@@scottWILSONvtbeekeeper Yes, here: kzbin.info/www/bejne/kGepZGuYiN2GppY and here: kzbin.info/www/bejne/iZeafZdojslljKs

[@game.over.]

Thanx for the intell

[@loosemoose5443]

What kind of grease did you use?

[@paulwojtala6425]

Great video, very informative especially for the DIY

[@EliminatorPerformance]

Thanks for watching!

[@rbarr775]

Good quality work. These things should come with about a dozen spare shear bolts, so the owner won't be tempted to reach for a grade 7 from his fastener assortment.

[@EliminatorPerformance]

Hahaha YES! It's funny but also sad at the same time, as I had to tell my friend that his $200+ repair could've been prevented by using a $1.00 shear pin lol

[@manuhonkanen2111]

Lube the shaft at 3:30 and it will slide?

[@EliminatorPerformance]

Yes, but this shaft was a little rusted so the gear was grabbing on the rust. A wire wheel will help clean that up, but you should be able to just slip it off with some grease!

[@recklesmess]

Great video, helped me repair my snowblower.

[@EliminatorPerformance]

Thanks Kevin!

[@a3a14613]

I was hoping you would discuss how you got the shaft back through the bearing. Apparently yours went quite easily, mine isn't.

[@danielfix1849]

So how do you pull the shaft off the blower? D

[@fernandocontreras6541]

Great videos, I have learned a lot. Can you tell me if the Ariens Deluxe snow blowers also use grease in their gear case? I saw a video where the guy was actually checking the level of the Grease or oil through a hole on top, that later he closed it by screwing a bolt, in this video it looked like oil to me. just curious.

[@EliminatorPerformance]

I can assure you it is grease, on this one the white is lithium grease and the green stuff is called "00" or double zero grease. Specifically made for low temp cold applications.

[@larrylacey5919]

I tried to get both gears to mesh dry before I use 00 grease. The worm gear alone spins and fits. When I add the round gear things bind up. Is it a bad gear. Its new . The company is no longer on Amazon??? Did they make bad gears. I am frustrated as I got every part so clean.

[@J8ck_hoff]

I can just use rtv as a gasket right ? Mine has a gasket but it's old looking probably won't seal the best.

[@EliminatorPerformance]

Yes, should be fine! You can also cut a new gasket using a cereal box if you'd want to spend the extra time!

[@generalzod2841]

Great vid good job explaining it all 👍🏼

[@EliminatorPerformance]

Yes, let the knowledge flow through you! Lol thanks for watching!!

[@bradwagner1362]

great video easy to follow

[@EliminatorPerformance]

Thanks for watching Brad!

[@larrylacey5919]

Did everything as explained. I have the exact same snowblower. When I put it together it will no spin. Any ideas. I did not fill it totally with greas yet. I was going to use the plug to fill it up. Any idea???

[@EliminatorPerformance]

Hard to say, make sure your shims and bushings are all lined up. Could be an alignment issue maybe something is on an angle?

[@larrylacey5919]

Thanks for your reply. Took it apart today. gears move until I put both sides of the case together. Too hard to move. Doesnt move freely. I followed your video step by step. My safts are so clean. New gasket. Could it be the wrong gear. The number was taken from my manual. Thanks

[@EliminatorPerformance]

@@larrylacey5919 it's possible you have no washers, or maybe too many? Hard to say without seeing it. Usually the gear and worm gear line up pretty good so you'd know it would work or not before putting back together. I'm sorry I can't be of much help without being there!

[@larrylacey5919]

@@EliminatorPerformance I appreciate your help. When I put the gear and shaft in one half of the case then lay in the worm gear They mesh well and turn. I watch your video many times. I use the identical bench and set up you use. Then I drop the other half of the case down and tighten it , it locks up. Could the gear be the wrong one. I got the number from my manual. There is a little play with the worm gear in its slot. I will watch the video again. All parts are present and in the correct place.

[@EliminatorPerformance]

@@larrylacey5919 I mean it's possible it's the wrong gear, maybe too big, but if it spins with 1 half on then it should spin with 2.

[@caine-chow]

I have a Stanley 45" snow blower model 45SS. I need the worm gear inside the gear box, I cannot seem to find the part number. Does anyone know who makes the parts for Stanley? or the part number?

[@johni4213]

Any idea on the size shear pins?

[@jorgeestrella5721]

Thanks for the posting ...helped me out a lot !

[@EliminatorPerformance]

Thanks for Watching Jorge!

[@Joeyjupiter123]

Another great video you are a-pro .thank you.

[@932stretch]

Hi Started the Ariens project. Ran into a problem hope you can help. Got the pulley off the shaft with 3 bolts/nuts. Removed the hub secured to shaft with a woodruff key and hex set screws. Can't get the Woodruff key off the shaft; Any ideas how to get this off so I can slide the shaft through the bearing?

[@EliminatorPerformance]

Hammer and a drift punch or some kind of chisel! Put a rag over it so it doesn't go flying across your shop.

[@932stretch]

@@EliminatorPerformance O.K. I will try that but it will have to be tomorrow. Hope you don"t mind if I keep you posted. thanks for the help. Jim.

[@EliminatorPerformance]

I don't mind at all!

[@932stretch]

@@EliminatorPerformance Hi. Tried that today and on the second blow, the key flew into the air. Pulled out the auger assembly only to find out the gearbox housing was cracked. Inside, the gear was ground up what looked like gold dust. Will look for a used housing somewhere. Strange, a reputable company like Ariens would use a vulnerable aluminum / cast housing. A real weak spot, to say the least. My 34 yr old John Deere is cast iron. Appreciate your help; Thanks again. JIM

[@EliminatorPerformance]

Anytime man, thanks for watching!

[@pastrana37]

Eliminator Is ME again Andres from CT...thank you so much.I just open the gear box.exactly thats my problem..I wish you can see how bad the gear was...I'm goint to amazon cause I want to order tha grease 7 Probably the auger gear too..I find the oe part but little bit spencer from mtdyard machine..problaly both..not sure which one you recommend..once again Thumup 100%

[@mike300406]

an extra 2 for the customer very thoughtful good man some people don't care 1 bit they would rather you bring it back more money yaa yaa yaa

[@EliminatorPerformance]

Yes I always try to provide the best service! Thanks for watching!

[@luigiarena2709]

Very clear video. Where can I buy gears. I have a Demax Snow Track and my gear looks like your Craftmans.

[@EliminatorPerformance]

Thank you! We purchased ours from STENS I believe, it's a distributor here in Canada, but you need a business account. Amazon is usually good, if not try a local parts store.

[@luigiarena2709]

I reside in Montreal. I will try some more.