How to Fix Bumper Gutter Rash

[@pR1MeYwL99]

That was great! But, this is a DIY for someone with a shop.

[@swc-diygarage]

Great repair video. Following your instructions a guy could easily do this in his garage or driveway.

[@customspraymods]

SW Customs I would try ask around at some body shops in your area. They may hire their booth out.

[@snitz157]

Dave you are honestly my favourite KZbinr and if it wasn't for your videos I would not have learned how to paint properly, i didn't even know what clear coat was until I watched your videos haha, I've learned so much and saved so much money thanks to you, appreciate that you put so much effort into your videos, it really makes the video more enjoyable and more fun to learn, cheers mate!

[@customspraymods]

CS Studios thanks mate great to hear these comments keep me going.

[@Lordblackfair]

That's why I pay people like you to do this kind of work. Doing this kind of work without a garage or a lift is painful.

[@AlexThorn]

My thoughts exactly

[@stevelenoxcolomba8717]

Hi my friend! I had a same problem, cuz the sidewalks are too high in France. Thanks for your video =) I'd like to drive this car! =) .Good continuation. Your French fan

[@jacksman]

Supporting your stance and your clicking. You are doing great videos and are super helpful, so keep up the good work mate.

[@JohnnyBitcoin]

The final results look soooooo goood wow 😲

[@oneway707]

At 8:50, you show the damaged pre-paint. At 8:55 you show the finished, but in a different light. It would be so nice to see before AND after in as CLOSE to the exact light as possible so we can see how good (or not so) the repair is. Thanks for the tutorial though!

[@customspraymods]

Taylor Mitchell 6:43 shows it pretty good

[@Rhevolver]

Man, I wish I could have your painting skills.

[@ThinhTran-wy6vc]

Wow amazing repair. Can't even tell. Looks like new

[@dynaudiofocus]

Love your videos dude,mainly because of you!

[@willdutt]

Do you have any videos on cleanup of the tools and what to do with left over paint?

[@yvestorquest5760]

This is exactly the video I was looking for! thanks!!

[@RyanProsser0]

Whoa nice stance in the opener!!

[@theidealist5823]

This is so satisfying to watch...

[@pmodd]

Love the intro; you tell 'em dude! :D Awesome work as usual.

[@MRVW-32]

Hi witch was cheaper the repair or a replacement splitter lip? * great job though, *

[@customspraymods]

Classickid21 the repair was much cheaper.

[@MRVW-32]

customspraymods I don't see why people are moaning or saying remove the front lip, if it's your pride and joy you want to keep it looking nice.

[@customspraymods]

Classickid21 hey man I know. It's my dad's car so it was pretty much free to fix. A new lip is over $500 over here.

[@MRVW-32]

customspraymods wow that's pretty pricey for a front lip, at least by fixing if you know it's been done correctly it came out really good, almost like you would never no it had be scuff. Its such a shame your USA based id happily let you do tutorials videos on my old half faded red vw golf mk2

[@customspraymods]

Classickid21 thanks. But I'm in Australia.

[@GTruck0]

Nice job mate. What tip and what psi spray settings for the clear and base coat?

[@customspraymods]

GTruck0 I use a 1.3mm gun at about 35psi

[@GTruck0]

thanks mate

[@coreydills6310]

Awesome job like always.

[@jaheengerauto]

Amazing man ur videos are great help keep doing the great work

[@off-roadrcaddict4572]

May as well just paint it with spray cans. Getting a pro paint job seems to defeat the whole object.

[@stevenm4959]

Do you ship to the US, some of the products you use i haven't seen here

[@jermainej5683]

What the main purpose of the reducer? Nice work... Like your videos.

[@customspraymods]

jermaine johnson the paint on its own is too thick to pass through the gun. The reducer or thinners thin the paint enough to get it through the gun and lay down evenly.

[@jermainej5683]

customspraymods thank you. Appreciate that. So add the two really don't make much difference then?

[@won93r]

great video, very detailed

[@2burning2turning]

Thanks for a very detailed video, I really enjoyed it. But where's the burnouts?

[@jacobmcnab9477]

Is it necessary to repair the entire bumper or can you just focus on the scratched area?

[@customspraymods]

Jacob McNab you can Blend the clear but it can show an edge in time.

[@jacobmcnab9477]

Thanks!

[@jihada.5288]

We need you in the USA

[@KIDGAMER4DAWIN]

You should make a video on how to do tyre lettering

[@ajmeernainamohamed2622]

Amazing same problem in my car and I went to body shop they asked for 1500 c. D. I try ts Tks man

[@JuanPerez-yy5hr]

Awsome job bro

[@1superocky1]

your the man.

[@alexander2685]

Thanks for sharing😃

[@reedrancho]

Great video, as usual. What I learn is, what CAN be done vs somebody's bone headed idea of how they want to do a job. 👍👍👍👍 P.S. Is true if I got the same spray gun as you I'd have to hold it upside down to get it to work?😜😜😜--never mind time for my nap.

[@aminedest9929]

Thank you !

[@HEKTIC458]

Nice job

[@Travelingman-1980]

Nice job!

[@clreaper]

What's a fair price to have a job like this done for you?

[@kidstoney3418]

Errybodys reaction when the baby gets scraped 💔

[@CUATS232]

What psi do you use with the tekna pro lite for paint and clear

[@customspraymods]

Quats C this is the pro lite. It's about 34 psi

[@customspraymods]

A bit higher for clear sometimes

[@caycebennett8667]

Thinking about the cost of consumables vs buying a new one. But I guess you wouldn’t need all that masking if it’s simply fastened on.

[@PocketAces88]

Wouldnt it have been easier to just take the lip off

[@savoirfaire8979]

A State of Trance: I thought the same. Lip was probably easier to replace.

[@snitz157]

Nunya Business well some people can't afford to replace a lip, this is why the video was made.

[@ForcedFalcon]

Not exactly, It takes about 10 minutes to mask something like this. Comparing that time to the time it'll take to either drop the guard liners and under engine shields to get access to the lip to remove it or, even completely removing the bumper to get access to be able to remove the lip.

[@dcboyhacker00]

CS Studios if you own a GT-R you should be able to afford a replacement

[@MRVW-32]

Who bets the guy who wrote that comment doesn't have a car 🚗 😁

[@CF-cx3hg]

So basically, I have to bring it to an auto body shop

[@hattorihonzo5804]

I dunno man i wanna do this but i dont have the paintin tools he has so how can any1 do this???

[@kevinwallace4635]

Hey there man, another great video as always. I've been enjoying your content for months now and had a bit of a question I wanted some advice on(from anyone else who wants to chime in to). I'm here in the states and want to redo my car, 10 years has left the paint dinged, scratched and generally messed up. I am planning to use 2k clear/primer and urethane basecoat colors. I live in a suburbs area and wanted input as to where the heck i can spray this job without endangering near by people. Thanks a ton for any input or advice!

[@snitz157]

Kevin Wallace you can get a pop up tent and set up a few vacuums to act as a spray booth and not let the chemicals into the air

[@kevinwallace4635]

CS Studios Great! I was actually considering something along those lines, granted my concept was a wooden super structure with plastic wrap (lumber being very cheap around me) and some box fans with filters for exhaust. I hate to be a bother but would you happen to have reccomendations for a tent able to do a car about 12ft by 6ft (its a hyundai accent hatch). Also, of course, thank you so much for the input

[@MrRedcelica]

hey davo your not to far away from doing the splits mate

[@berczigabor]

What's a "bamba'"?

[@tfcortina]

Damn, I never even knew about the Plastic filler. I wish I had of known since trying to stop the constant cracking of the normal bog on the bar. DOH!

[@AlexAlex-im5mt]

Filla

[@RaymondLo84]

That bumper will be scratched the moment it goes through the first speed bump again. :D

[@MGOD92]

Could of 180 grit them until they were gone

[@cottoaleman2036]

Nice , but I dont have a FU@&#% SHOP OR YOUR GEAR 🤣🤣🤣🤣

[@customspraymods]

Try this video mate. kzbin.info/www/bejne/g6TSmId7Z6-optU

[@Tony-tk4ht]

I fucked the shit out of my front bumper, even though it's something replacable, i was pissed

[@AwakeDude911]

that's totally an elegy from GTA 5 ...I got 80 of them

[@sevens12]

Gutter run

[@mastmalang70hk]

just get a new bumper

[@PJPEE]

I live near vg auto paints. Wanna paint my Suzuki Liana 2006 for free? Haha