Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
@stephanrooker83123 жыл бұрын
Is it a camshaft position sensor or a crankshaft position sensor
@lilkgb4773 жыл бұрын
I changed out the intake valve and I am still getting the p0022 error code. Do I need to clean or change the exhaust one also?
@a2cryss3 жыл бұрын
@@lilkgb477 It may be a stretched timing chain.
@STePHeN320_12 Жыл бұрын
Hi my bmw x5m has got po012 and po022. Can clear the codes and get into boost but it shuts the car down. I changed the battery cause the other was a bit weak. But I’m in almost limp mode now
@gamingrocks6738 Жыл бұрын
I have a 2010 ford expedition XLT EL with a 5.4 V8, popped this code up this morning. Did some research and it claims to point to camshaft position sensor, what are the odds of it being something different, was gonna change both sensors and see what happens but i know its likely that it can be something else
@nondainc Жыл бұрын
Hello, kindly make sure that the condition/viscosity of the oil is okay. Check also the wiring and timing chain.
@samuelmiller35028 ай бұрын
Hi did you fix the issue? if you did how did you pls?
@learn_techie2 жыл бұрын
I got P022 error but no check light and the engine is not starting , why there is no check light?
@nondainc2 жыл бұрын
Hi Waseem, please provide us with your vehicle's year, make and model.
@audreyblackmon84132 жыл бұрын
I have engine light on and code reader came Up I just spent 3400 to rebuild my transmission
@bucsfan42092 жыл бұрын
I replaced both vct sensors, checked oil (looks clean and full) and I’m still getting codes p0022 & p0012 please help
@nondainc2 жыл бұрын
Hello, please provide us the year, make and model of your vehicle so we can address your concern specifically for your car's make/model.
@bucsfan42092 жыл бұрын
@@nondainc I have an 09 f150 xlt 5.4 v8
@nondainc2 жыл бұрын
Kindly check the engine timing chain tensioner if faulty and needs replacement.
@bucsfan42092 жыл бұрын
@@nondainc should I just go ahead and order a new cloyes timing chain & component kit?
@bucsfan42092 жыл бұрын
@@nondainc hello
@daviddart400 Жыл бұрын
I replaced magnet, camshaft valve and wiring and oil and oil filter, I'm still getting the 0022 code after clearing code.
@nondainc Жыл бұрын
Hi David, there could be an issue with your timing chain and the PCM. Please also check if there's any other code that registers along with this code.
@daviddart400 Жыл бұрын
@@nondainc only codes are for the stereo because I have an aftermarket stereo. Only code is 0022. But I will take the car Saturday to Volkswagen and let them check. It drives normal besides white smoke from exhaust but coolant is still sitting at Max and no boost. But I will definitely have Volkswagen check it out. Thanks
@asalioption8974 Жыл бұрын
Great 👌
@nondainc Жыл бұрын
We appreciate your feedback!
@fishjunkie249 Жыл бұрын
Oil was all ready changed a day prior I had a p2092 code change that now I have that p0022 code
@nondainc Жыл бұрын
Hello, as you are receiving more than one error code, we highly suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
@Fetecheney3 жыл бұрын
I keep 5W-20 and 5W-30 oil for my two cars. Can using the wrong oil cause this code to pop up? I might have grabbed the wrong oil when I changed the oil last...🤷♂️
@nondainc3 жыл бұрын
Hi Kyle, yes- please follow the viscosity recommendations for your vehicle make/model for proper lubrication.
@GatesRapes3 жыл бұрын
I switched from synthetic 5w30 to 5w30 conventional and it's been 10k miles, no codes !! V6 Taco
@Fetecheney3 жыл бұрын
@@GatesRapes interesting. Maybe I'll try that. For anyone who's following up on this for their own cars, I changed my oil again to eliminate the possibility that the wrong oil was in there, it ran smoother for a while but it's reverted to having the same issue. Although the check engine light does turn off every once in a while unlike before.
@DamonLightfoot2 жыл бұрын
I have an 05 Audi Allroad Quattro 2.7t, I have the P0022, P0491, and P0492 codes. Car would crank but not start. I changed the oil and it started running again for about 4 days, just went to start it again and it won't start. I tried to search for the Camshaft Oil Control Valve online, but I cannot find it for this model. Is the part called something else on this car?
@nondainc2 жыл бұрын
Hi Damon, since you are receiving multiple codes, we suggest getting your vehicle visually inspected by your local mechanic for further diagnosis.
@Bigberthasilverado182 жыл бұрын
I have this code but my mechanic is saying i will have replace the engine. Is that true?
@nondainc2 жыл бұрын
Hi Cameron, please provide us with your vehicle's year, make and model.
@Bigberthasilverado182 жыл бұрын
@@nondainc 04 ford f150 5.4L v8
@nondainc2 жыл бұрын
Hi Cameron, an oil change is recommended and please follow which viscosity of oil you should use. Let us know if the issue will still persist after an oil change. Also, double check if there's any other trouble code that registers along with this code.
@Bigberthasilverado182 жыл бұрын
@@nondainc P0022 INT Cam Position Timing Over Ret Bank 2 P0171 System Too Lean (Bank 1) P0302 Cylinder 2 Misfire Detected P0345 CMP Sensor A Circuit Problem - Bank 2 P0420 Bank 1 Catalyst Efficiency Below Limit P0430
@nondainc2 жыл бұрын
Hi Cameron, since you are getting multiple error codes, it is best to get your vehicle visually inspected by your local mechanic. If you are not satisfied with the diagnosis of your first mechanic then I would suggest to get a second opinion. Have it visually checked by other mechanic.
@twobalcain4 ай бұрын
This ai training is silly. Good luck!
@FreedomRock44 Жыл бұрын
Can you drive your car with a P0022 code
@nondainc Жыл бұрын
Hello, we suggest to fix this as soon as possible as this code can severely affect the drivability of your vehicle and extended driving with this can cause internal engine damage.
@FreedomRock44 Жыл бұрын
@@nondainc DOes it mean the chain jumped timing or just a cam sensor is bad or can it be just an oil change????