How To Fix Your Robo 3D Printer : Tips & Tricks to Get Awesome Prints - @Barnacules

[@coadyhaga3666]

Just unboxed my new Robo, and the folks over there are listening, most of your upgrades are already addressed. Spool holder is in a different location, Z-axis rods continue into supports at the inside top of the housing, and the main drive gear for the print head has no slop at all. There is not a switch in the location you showed, so I can't speak to that yet, and have yet to start a print but will update when I do. Keep keeping them straight over there!

[@edwardtaylor8319]

Congratulations for almost hitting 80k subscribers!! I found you when I was researching what would make a good entry level 3D printer but i'm really impressed with the rest of your videos and im loving the MAN-CAVE!!

[@CVDOnTwoWheels]

Thanks for posting this video. I love my Robo3D, but I ran into the exact problems you talked about. I ended up ordering a new E3D head today since mine will only run about 2 minutes before clogging now (was working like a champ for about 4 weeks). Your updates have truly helped it all.

[@christopherkennedy4564]

I know this video is old, but I just got my first robo r1+ and you saved my life explaining how to level the print head.

[@carmengianforte9907]

Did my first print today on my Robo 3D. Getting ready to go do a spool holder. Thanks for all the help.

[@corystg8106]

Just got into 3D printing on the ground floor. Picked up a QU-BD 2-UP kit from kickstarter for $280 (incl. shipping!). Waiting for a couple replacement parts and then I should be good to finish building this guy! Thanks for sharing your experience on your 3D printer(s)!

[@xirtus]

I love you sir I wish you would post a slightly more in depth INSTAlling the extruder I still haven't got my robo working :/

[@KevinKanNguyen]

Man that sucks. My robo came in today ands it's working great. I'm only working on 20 mins or less prints but it's working fine.

[@xirtus]

Kevin Nguyen That's good I know robo cares, they do! I deserve my troubles for being an early adopter without a lot of community support to take care of problems along the way.. I got mine early and had problems with my extruder which eventually I wrote to robo about and they are sending me the new r1 metal replacement. I'm close I'll actually probably get it working today, I had problems with the thermistor and attaching the new extruder and getting clogged again!

[@KevinKanNguyen]

Yeah mine is the one with the new Hex heads. i had some problems this morning but it was more with mattercontrol than the printer.

[@Barnacules]

I will be installing the E3DV6 hotend soon, I will try to make the video more indepth for that install.

[@xirtus]

Barnacules Nerdgasm you go girl

[@troubleshooter6372]

I've some questions about the endheat installation: 1- Did you flash some firmware on the robo 3d to use a high temperature? 2- Did you fabricate a new support for the E3D hotend or the actual support fit well? 3- About the conection, did you just cut the wires out and connected them with the new E3D hotend wires?... and connect independently the fan directly from the power?

[@Geoxor]

The song is made by a Greek guy called Konstantinos Gerodimos and the song name is - Stereofloat Crashed

[@ryanamberger]

Congratulations on 300000 subscribers man. Quite the achievement.

[@espheroz]

what about the z axis problem, mine goes all the way up overtime i try to print and can't go to home

[@GeekPizza]

you should have a look at the bq hephestos 2 printer, its a DIY 3d printer but has a lot of good points in it, like the extruder comes with all the fans on it, it auto-levels and checks the distance from the platform before each print and stuff. I have one and I love it, not too expensive either

[@juanjacoboCastanedaDollagaray]

I'm planning on getting the ABS model, and I've been looking at your modifications, i like and understand most of them but have a couple of questions like for instance, where you got the rods you used to stabilize the z axis and how these are mounted on to the actual printer ( not the bottom or top, but the actual head rails... its the best way i can describe it... i assume thats how it was done) and also, where exactly does the thermister need to be secured onto the printer, i've tried to extrapolate this from the video, but i'm not even sure what wire i'm looking at, i thank you for your help!

[@TinaPeapod]

Thank you for this video! I just got the robo 3d r1plus, and had some issues that you described in your video. They have since added a stabilizer in the top for the rods and I'm sure a bunch of other upgrades (fixes). Thank you for the spool! Better design than the one that comes with it in my opinion. Will be printing this next. Great Video.

[@philippekoenig1831]

Hey Barnacules, I was thinking about getting the E3D for my robo 3d, could u make a more in-depth video on how to connect the hot end to the power supply Thank You

[@DRONESTA]

Why dont you get the dual extruder update for the ultimaker i would love to see it printing in two colors. I love your chanel im from mexico and i have started to save for a ultimaker

[@lilyrodriguez6617]

Hi Sir, I have had my my printer only 3 months and the power will not turn on. I did a 2 hour printing everything was great. 8 hours later it was dead, No lights and no sounds. I did check the power cord and the outlet. I have tried to get help from ROBO and some forum. So success. Do you have any suggestions. Thank you in advance!

[@makeyourown2012]

It's also a great idea to reduce z wobble by printing a guide and glueing a bearing on the end. Then use it to stabilize the Z axis threaded rod from wobbling as it moves up. It eliminates banding as your prints get taller.

[@craigmuth4294]

Where did you get the new print head? I have a Robo 3D and Plasticscribler Asterid 1100 - neither one has a reliable hot end

[@Gaming101-c3g]

Hi jerry, I am not exactly a master of 3d printing, I was wondering whether I could use the v6 hot end with the fan holder, or whether you would recommend to just go with a v5. Are any of these modifications too difficult for a newbie like me to do? Thank you, for the great video, and for any responses.

[@karlzhao314]

I'm just wondering. Since the Robo3D has a RAMPS board, why didn't you just screw in the fan wires to the Heater 9 block, where the designers of the RAMPS board intended you to connect them to?

[@LeJeuneArouet]

Great video, I love when people solve problems on their own; fun to watch and useful

[@metalfishead]

Getting my Robo3D ABS+PLA unit next week. What other things should I be concerned about? For instance, what kind of software, if any, is needed? What other information/materials do I need in to prep for it's arrival?

[@jensmyke]

Hi I watched the vid and I was hoping that you could go more in depth on how you put in the new print head and fans

[@Metroidam11]

I actually like the thumbnails! Gives me a happy silly attitude before watching the video and cheers me up. :D

[@Barnacules]

I like them too, that is why I do them. That guy was obviously upset and woke up on the wrong side of the bed just looking for someone to pick on :P

[@bradandhb]

Where do I find your "3d printer print head cleaning kit" that you say is on ebay?

[@ZILOGz80VIDEOS]

if I just get the PLA printer can I put the e3d hot end in it and use it for any material?

[@marcoschapira6759]

how much would all the addons cost in total pleas answer soon. Very helpful

[@DaedalusProps]

I really hate to be “that guy“, but dude, if you could get back to more videos like this, about 3-D printing and the methodology behind it, that would be absolutely amazing.

[@brandonmackey1]

Can you print the defcad Ar-15 lower receiver and maybe a magazine?

[@rosebarrette6292]

I have a hardware error that appears when I try to print, the bed is not aligned and the extruder scraps the bed. Any suggestions on how to fix this?

[@Kcnone]

The link for the hot end didn't work. Was it the Direct Extrusion or the Bowden Extrusion (800mm tubing)

[@DarkArmedDaddy01]

I can't wait until my twin Robo 3D R1 printers and Filastruder come in :) Having a Nerdgasm waiting on the damn things :) Thank you for inspiring me. You Rock!!

[@RoBo3DPrinter1]

DarkArmedDaddy01 Thanks for your order DarkArmedDaddy01! Let us know if there is anything we can help you with. 844-476-2633.

[@REALIVH]

hi you have only linked to the fan that cooler the print, what do you print around the fan heat sink on the E3D? and what version E3D do you use?

[@CafecitoOsito]

could you fix the link to the hotend? also did you buy the direct hotend or did you buy the bowden hotend?

[@3DPrintingbuilds]

Thanks man... is there any way to make it faster?

[@T70781]

Great video. Thanks for your contributions to the community! One note, I'd suggest that you modify your Z rod stabilizer so that its adjustable. No two printers will have the same tolerances and those rods need to be super accurate to prevent jamming as the z axis moves up. If you make the stabilizers adjustable then users can run their z axis all the way up THEN tighten the stabilizers so the spacing will be near perfect. If you install this stabilizer as is, make sure you run your z axis all the way up to make sure it doesn't jam. Good stuff. I love that a $700 printer with a few modifications can make really good prints. Thanks again, Tony

[@friesframe8]

Love the video! Getting my Robo3D on Monday. Would you possibly be able to make a step by step of installing the new hot end? I've never done any wiring or anything like that before so it'd be super helpful! Also, I'd love to hear some tips on the specs you are using for your prints or just some general 3D printing tips!

[@ChrisJoseph]

Thank you so much for this video. I've been giving it a serious look for a first printer and those mods will be the first things I do when I get it.

[@Jamie-qm3sp]

Chris Joseph just get the robo r1 plus it's fixed all the problems so u don't need any mods

[@ChrisJoseph]

Jamie, thank you. I saw the Original Prusa-i3-mk2 not long after and got THAT instead!

[@guzklein]

would i also need to replace the printer head if i have the PLA model

[@KN1IGHT]

I like your take on this particular printer. I'm curious though, if the changes you've made, rather your upgrades, have been implimented into the latest version of this particular printer. I've recently had mixed luck with two different Davinici II printers from XYZ. Ugg.... I won't even get into why I dislike those printers so much. But recently purchased this printer under the label, Robo 3D - R1 Plus +3D. It will arrive next week and I'm wondering if the company that designed this printer has implimented any of these updates into it. Like the supports for the rods. I never had "tall print" problems with my Davinci Printer, but it had a slew of other issues that I won't go into. Any advice you may have on someone getting a brand new Robo would be greatly appreciated. Thanks in advance. I'll be watching for more vids too. I've been 3D Printing for two years now with Davinci printers as well as an Afinia H series printer at my work place. I'm eager to see how the Robo holds up.

[@gijoelx84]

+Michael Hyatt Most of the upgrades that he has done have been built into the new models. I bought the R1 a few months ago, and pretty much everything I ve seen him do for upgrades have already been included in the model I bought. I believe came out with the R1 Plus right after I bought mine, so it may include more improvements. I ve been very happy with my R1 so far.

[@garfield1517]

how did you remove the print head? is there a video for that?

[@Hcaziah]

Im thinking of buying this printer, or The pheonix 3D printer. IT is $500 assembled and with a dual extrude..Which should i choose?

[@pixelgeek9293]

Is this the first one that they released or the new r1 plus? Do you know if they fixed all these problems in the new version? Thanks!

[@nateclishe8029]

im very new to 3d printing so so oleaee dont get angry if i ask stupid questions, but when you say you reolaced the hottend what did it improve like is it REALLY necessary for good print quality? and also where do i find the firmware settings because i just ordered It. thanks!

[@henrykvanderbruggen5679]

Is the robo 3D better then the ultmaker 1 w/ the heated base upgrade?

[@petediaz4146]

I would like to upgrade to ED3 v(5) hotend for my Robo3d Abs/Pla model and i was wondering is it direct feed 1.75mm? I found the kit on Filastruder for 79$ with a lot of parts that im not sure ill need, do you have an opinion hence fourth?

[@FelipeUricoecheaPercy]

Do you know if the Robo R1 shipping now comes with any of your upgrades?

[@jayferron91]

where did you get the e3d print head from and where are you print files for the robo3d

[@mikecox9389]

Hi, what version robot 3d do you have? Didn't the robo r1 plus fix some of the issues you mentioned?

[@tazo1jd]

what does it take to change to a E3D print head on the robo3d r1 + ?

[@angelfleet1]

great video!...do you the robo 3d would be good to use for commercial use?

[@johnallen4030]

My Robo R! + is down for some sort of stepper drive issue. Always something with this thing. One expensive paperweight.

[@LG508Parkour]

what 3d printer would you reccomend under $800? I had a printrbot jr. but it doesn't work anymore. What would you do?

[@GUNVALKERIE]

I was wondering if you can help me with something I have hit a few dead ends when it came to converting google sketchup models to STL files for 3D printing I would go to certain websites and click on most of the links and it would just bring me to other sites giving instructions on how to use the program which really doesn't help me cause there is no download button... (especially when I go to thingiverse I open the compressed zip files there's nothing inside except a certificate and I've download many files just like it and all of them don't have anything inside) and just when I think I have gotten the STL plugin extension for google sketchup it's a DXF plugins extension and for some reason the DXF plugins extension doesn't show up on the extensions tab so that I may export google sketchup files and DXF files don't work on makerbot makerware program for some reason... what do you suggest?

[@mschotime23]

I am not good with wires - can you get a new printing nozzel 5pcs 0.4mm Extruder Nozzle For Creality Ender 3 CR-10/10S 3D Printer Are they universal?

[@nemesiscoins4546]

Is the print head replaces the E3D Hot End Kit - Direct Drive V5 1.75mm or 3mm? Great VIDS helps alot

[@holyaerospirit]

Jerry. What brand of furnace cement did you use for the thermistor?

[@stevenpeters4677]

Hi Jerry I was directed to your videos from another maker in the 3d community.... I have a few questions and comments on your video. First I would like to say JOB WELL DONE (tip of the hat) secondly I was curious as to when you got your robo printer I just received mine a few days ago, (it seems they have addressed the issue of the vertical rods) as my inner case has the spots for them to lock in on the top, as well as it has its own led lighting in it. Mine also came with a newer version material holder that locks into the outer case itself (but I still think I like yours better) my other concern is that with mine it has a good printing head (well so far anyways) but the problem I am having is the way that they mounted the cooling fan for the head is it now drags on the actual printed part area... sometimes catching on the filament and mucking up the entire print, I wish yours was newer so as you could possibly help me solve this issue. DO you always use 70 c for your bed temp? and what temp settings do you recommend for printing with PLA and or ABS??? looking forward to your responses keep up the good work and helping us all out .

[@rosebarrette6292]

Jerry I just bought a ROBO R1+ printer and I downloaded the software and tried to print and it says it is printing but the printer does not respond. Can you help me on this I can't figure out what the problem is.

[@alindaramone9907]

When I try to load my filament the extruder starts to come off and the filament won't load. We "fixed" it but we are trying to load a different filament and it's doing it again. Any tips? Or is it broken?

[@tonycerda]

Thanx. just putting masking tape on the large feeder gear got rid of the small tolerance and shake. no more smears. amazing how something so easy solved something so hard

[@Barnacules]

Yup, it made a big different to how clean my prints were coming out because I would just get random goobers. I try to keep my solutions as simple as possible because complex solutions are hard to trouble shoot :P

[@nialldavo9222]

im going to get a robo3d because of you. They look TOO GOOD

[@SnackAttackGaming]

I am in the market for a 3D printer and I want one that is under $1000 with a heated bed. Would this be a good first printer? I have the time and patients to make adjustments but I don't want to have to put one together. Any suggestions/comments?

[@tonycerda]

Hi Jerry, just printed all the parts and the rod supports make such a huge difference. thanx a million. by the way, how is the cable holder printed part held into place? could you send or post a pic of it in place? again, thanx

[@Barnacules]

The cable holder actually didn't install right. the person that made it is going to send me a different model eventually and I'll do a video when they do.

[@FarFromEngineering]

Thank you for the videos! DO you have a link for the LED bars you are using? Do you need a controller or you just plugged the wires and it worked?

[@WeAreTwoDoorsDown]

If you plan to upgrade the print head, is there ANY reason to get the ABS version of the printer?

[@denix0]

The only difference between PLA and PLA+ABS versions is the heated bed

[@Barnacules]

Denys Dmytriyenko PLA version doesn't have a heated bed and can't extrude materials hotter then 210c I think.

[@denix0]

Barnacules Nerdgasm correct. That was the answer to WeAreTwoDoorsDown question... :)

[@WeAreTwoDoorsDown]

Denys Dmytriyenko Oh, so if I plan to ever use ABS, I should get the ABS model?

[@denix0]

WeAreTwoDoorsDown or replace the bed later.

[@Jamie-qm3sp]

Nerdgasm thanks for the straw idea it helps my prints come out cleaner

[@robwgeorge]

has Robo 3D included any of the "mods" you suggest in the latest versions of their products? They seem like must haves at this point.

[@lexgoth2005]

+Robert George I just bought a Robo 3D two days ago, now called the Robo 3D R1 plus. A few of the things shown here to print are added to the new design. The most important being that the guide rods reach to the top of the case and fit into holes lined with foam to keep them supported. This being said there is still a bit of wobble in them and could be supported better, but it is one change that is similar to these here. All others such as the print head change are still relevant, and the need to make a top mounted spool holder is a godsend. So even if you buy one of the new models, print a spool holder first.

[@LG508Parkour]

you should do a full video for each of these and how to print, install, and therefore fix the robo

[@musician1928]

I've had a Robo3D Printer for a few months now and I have experienced the same isues. Where did you get the new print head from? Thanks for posting this video. Cheers, John

[@razorseal]

Jeez. This is stuff I have to do if I buy this printer to have a good printing experience? Curious is this stuff has been fixed by the manuf. since making of this video?

[@stumblesworth794]

Hey Barnacules, what 3D printer do you recommend the solidoodle or the Robo? Since there both the same price.

[@bobwainwright7468]

Which do you prefer the robo 3d or the your other one

[@benjaminsisko7564]

+Barnacules Nerdgasm Can any Hotend work with the Robo3D printer? I saw the one you posted, but it was like all the way in the UK and expensive. :O

[@FlugznutzGaming2988]

thanks for the tips i just ordered my robo last week hope to get it soon ill have to try some of these.

[@Barnacules]

Awesome! Let me know how it goes.

[@FlugznutzGaming2988]

will do thanks

[@kelleymm21]

the link to the replacement print head goes to a product not found page, can you update that or is the one you bought no longer made? I just ordered this printer so I need to make sure I have that print head on hand

[@Barnacules]

Just search for E3D jbolt print head on your favorite search engine and you should fine it.

[@i3dclub207]

Great Video Nerdgasm! Well Done

[@DaggaSoft]

Could you do a video for a series of "test print" models from thingiverse, for your robo3d? I'm itching the pull the trigger on a printer and I can't decide. But I like what I've seen with the upgrades you've done. Your vids are basically the reason I'm considering the robo.

[@dschoppers]

Ok so I want the ultimaker2 but I think Im gonna get the robo3d first and then maybe the new ultimaker2 will be ready, it looks taller which means more cash but they didnt have a price listed yet... Did you hear what it was going to retail for?

[@dschoppers]

$3,000 for the ultimaker2 Extended is what one website is guessing.

[@RoBo3DPrinter1]

Hooked Graphics Thanks for the order Hooked on Graphics!

[@danzambrano12]

is the hotend a v6 or a j-head?

[@MythicalManiac]

Hey what's the best printer to get that's cheap but gets the job done and looks good

[@DMANDIOGUARDI]

The A8 kit looks good and its $200 on gearbest right now.

[@Haragaish]

What software do u use for robo3dprinter??

[@TheInsainepops]

Just wondering what do you do for a living?

[@denix0]

Thanks! Can you please provide a link to the Furnace Cement you used? Thanks again.

[@denix0]

And one more question - did you have to flash the new firmware to bypass the temperature limit for the new E3D hotend? Thanks!

[@djpoizon2k9]

Taken from the "about" section: "One thing I forgot to mention in the video is to use 'Furnace Cement (from Amazon)' to secure the thermister (heat probe) to the print head instead of Kapton tape, it gives a much better connection between the censor and the block and the temps are far more stable as a result!"

[@e9757gfk]

So just to be clear, when you install the e3d hotend, you just use the wire used by the old one?

[@Barnacules]

Yeah, I just spliced the wires and soldered them.

[@e9757gfk]

Barnacules Nerdgasm Thanks for the answer :) know I wait for my robo without stress :)

[@xtrasafeful]

HAPPY NEW YEAR!!!

[@ompatel8549]

the printing head you were talking about how do install it

[@mattd390]

"Go buy a happy meal", love it! Great video as always!

[@ehyouman]

Great videos, I ordered my robo 3D printer tonight :D:D

[@SuperMoto24rm]

hello, i want to buy one 3d printer for now i have choose robo 3d (pla + abs model) can you tell me the best model around this price?? (699$) thank you!

[@rt4able]

Samuel it will come out in august.

[@stefanmeiners2950]

Jerry! Another great video thanks for sharing!

[@ART3dPrinting]

We recommend this guy's videos.

[@mr_anderson6136]

Hey jerry I have a sub $1000 printer from Plastic Scribbler and the extruder is a nightmare of never ending clogging. The stepper motor keeps on stopping and missing steps during my prints. Do you think I should take a chance and try a e3d v6 or try and return it to get a robo?

[@RoBo3DPrinter1]

IN3RT1A Tech If you do end up getting a Robo, we'll be there to help you IN3RT1A Tech. 24/7 support. Thanks!

[@mr_anderson6136]

RoBo 3D Thanks guys, I did get a robo, super happy with it :D

[@micwallace]

Just got my robo and I'm having exactly the same issues. Thanks so much for sharing, you've been super helpful and linking all the 3d parts is a bonus! Can't wait to flip the z-axis and try "on the fly leveling". I'm having alot of trouble with PLA sticking to painters tape, would you say hairspray is better?

[@Barnacules]

Yes, the Extreme Hold hairspray works fantastic. Spray it on while the bed is heating up and let it get tacky and start your print. I've yet to have something come unstuck. And when it cools it usually just pops right off.

[@micwallace]

Thanks Barnacules Nerdgasm , I'll give some hairspray a go. I flipped the z switch this morning and did some on the fly leveling. Seems to be working much better now, can't wait to print some mods and get it working even better. Thanks so much for your help!

[@BloodBlight]

Have you done any dual color prints on the UM yet?

[@Barnacules]

Yeah I printed a twin color traffic cone, I'll try to do a duel color print this week and record it!

[@dege13]

I wish I saw this video when I first got my RoBo 3D printer. Thank you!

[@koryyyy]

Thanks for the video! Im about to buy the new model R1 Plus, as my first 3d printer. Hope it works (I read some negative reviews around...) THanks again

[@dantedamanti6473]

Ok so your printer is an older one. I have the newer one and my z won't home. So far this 500 dollar printer is a waste of money. Any support info on rehoming the Z? Without hand twisting the threads?