How to FLASH your BMW's Transmission with XHP

[@ronburgundy4375]

What gauge cluster is this. I know the 550i has a similar cluster but I've never seen these different layouts I like that analog one

[@fstlnj29]

Are you able to advise with dct lsd installation. Picking up a 2012 135i and will be putting in an lsd. I read in a few places where the dct gets thrown off a bit when you change the gear ratios. I 1. Is this true? I see DCTs with 2.56 and 3.15 in the M3 cars. Thinking of going 3.08 to use all of the gears on the track. 2. If so, do you just set the raito of literally reassign all the gears and ratio. Thank you! Jay

[@o.ko.k7550]

tuning the Gearbox?which or how kind of tuning is that?which parameters change this tool in the Gearbox?Have this in long time any bad effects to the Gearbox?

[@EvanGoyuk]

It will not hurt the gearbox if you maintain your grearbox

[@bogdanzivkovic8821]

@@EvanGoyuk changing oil?

[@EvanGoyuk]

Yes changing the trans fluid

[@erdoganog]

So there is a break in for about 50 miles okay but what if you don’t flash and tune it but only reset the memory parameters in the trans the Carly app has that option does it need the break in still

[@javierp6146]

Hello Evan, question for you: I have the same car you do, FBO, MHD 2+ and XHP stage 2, what XHP custom settings do you have turned on on yours?

[@craigscotty28]

hey man..i need help. i’m swapping my 8 speed trans with a used one with low miles to go on a trip next week and i don’t know anything about the tuning aspect but i need this transmission to work asap. please help! i will pay

[@EvanGoyuk]

You will need the transmission Virginized. I can help you message me @evangoyuk on instagram

[@ceddy1031]

Hi Evan, after I flashed the transmission using xhp flashtool,. I got the chassis stabilization malfunction error. Car was fine before the flash. Now I can't get rid of it. Every time when I start the car, this error will come up and I can't use any sport / sport + mode. Do you know if I need to update software on the modules? I checked the wheel speed sensor and it works fine. Can't figure what to do. Should I try the WinKFP program and see if my car need any software update. Mine is 2011 F10 535i.

[@ryansatchell3753]

Transfer case probably fried or need servicing. I'm in this situation.

[@Zed_Solo_RS]

Can you use the MHD adapter to do this?

[@EvanGoyuk]

Yes

[@eskania]

Why you didn't go for Stage 3.

[@EvanGoyuk]

Too harsh!

[@jvz_5.0]

I have a bmw 535i 2011 f10, I’m on stage 2 mhd, what do I need for stage 1 xhp? The license, the map and the adapter right. Can I use the mhd adapater? And would I tune it the same way as MHD through my phone or take it to a tuner ? Is stage 1 safe with stock mods or do I need additional mods for support ?

[@BeamedoutTV]

Why no custom launch control

[@EvanGoyuk]

Not good for the car

[@jackazeidan]

You did your first test (stock transmission) with very low gas, your tune automatically lowers your performance so it doesn’t give a fair representation, but nice video nonetheless 👍🏻

[@henryanderson9591]

Hey Evan love your videos, super helpful!! Im having trouble coding my e46 headlights and was hoping you could help. I went from factory bixenons to aftermarket halogens (yeah I know its a step backwards lol) and was curious how you code the low beam halogens to work? Do I change the low beam pwm and uncheck all the xenon stuff? Currently running the high beams as daytime running lights so I at least have something but am still avoiding night driving. thanks!! (commented on an older video too but wasnt sure if you'd see it)

[@nikosstentoumis3961]

hi. i want to retrofit my e46 with bixenon. can you send me the FSW/psw file of yours SWITC LSZ and me send you back the file of mine switch? perhaps by a comparison we can accomplish the coding. thans!

[@EvanGoyuk]

Message me on Instagram @evangoyuk

[@jonathanschultz2472]

I did this and now my select is delayed but drive it super fast. Major disappointment and I have no idea why. Xhp doesn't give a single fuck either

[@technopro-kz4xv]

Hey, any update? Did you tried to change to another map? Have you flashed straight to map 3?