How to get more foam from your foam cannon

[@TroubledTimes2024]

"Don't be so cheap" LOL good advice across the board

[@DetailingBreakdown]

😂

[@chriss1183]

The Smurf mobile came out nice and clean.

[@DetailingBreakdown]

Ty

[@Rais1959]

You are absolutely right bro but 1.1mm would increase little more compared to 1.25mm orifice

[@DetailingBreakdown]

I agree, did I say it wrong? Maybe I misspoke.

[@joannesorci1277]

where do you get extra orifices? nothing came with this foam cannon

[@DetailingBreakdown]

U can buy on Amazon. Mine came with 2

[@sampulatorsingh9430]

I used my foam cannon and it doesn’t foam as much, and sprays a very runny soapy water. I have an 1100psi electric pressure washer. Will a 1.1mm orifice work better or will a 1.0mm orifice work better with my foam cannon? Not sure which one I should order. Please let me know.

[@DetailingBreakdown]

Buy smaller and put more soap

[@Finest119]

1.1 is for low psi like electric pressure washers

[@DetailingBreakdown]

Sure is

[@rizwanwaheed3073]

should i buy 1.1 or 1.25 now i am confused 1.1 is 3k PSI and 1.25 4k PSI which is good lol

[@DetailingBreakdown]

@@rizwanwaheed3073 what PW are u using?

[@rizwanwaheed3073]

@@DetailingBreakdown maxima induction motor 1200 watt 110 bar

[@DetailingBreakdown]

@@rizwanwaheed3073 buy the smaller 1.1

[@jeffkraus1457]

Just fill the foam cannon all the way with soap, no water. The foam cannon will take what it needs for MAXIMUM foam production.

[@DetailingBreakdown]

I’ve done that as well

[@timnowlin1]

1700 psi with 1.2 gpm. What one do I need in mine the 1.1

[@DetailingBreakdown]

Try both but I’d probably use the 1.1

[@brokentradgedy]

Yikes that's so bad especially since youre using a gas pressure washer....are you sure you had the nozzle turned to the -minus (less water, more foam) ? My electric pressure washer foams so much

[@DetailingBreakdown]

I barely put any soap. I’d say that was great for that little amount. This cheap foam cannon will foam up heavy with more soap. Thanks for watching

[@earlhannah8616]

I have same foam cannon but can't get the fitting off any suggestions?

[@DetailingBreakdown]

What fitting?

[@earlhannah8616]

@@DetailingBreakdown the fitting where the orfice is located

[@DetailingBreakdown]

@@earlhannah8616 ohh, use a flathead screwdriver

[@earlhannah8616]

@@DetailingBreakdown i am unable to undo the hose fitting mine seems to be extra tight

[@DetailingBreakdown]

@@earlhannah8616 just crack it, it will loosen

[@MonStruO72]

It’s your soap or lack of I use gold class on greenworks electric PW and it’s thicker than that What’s on the windows?? *😭

[@DetailingBreakdown]

Ya, if u put lots of soap it will be thick

[@MonStruO72]

Detailing Breakdown What coating is on the driver window

[@DetailingBreakdown]

JayAr AngelWax H2GO

[@MonStruO72]

Detailing Breakdown thx

[@DetailingBreakdown]

JayAr anytime

[@bigteo90]

20 dollar foam cannon ??? dollar pressure washer good video tho

[@DetailingBreakdown]

Dollar Pressure Washer?