How to Guide: Hyaluronic Acid Facial Serum

[@gigi131gmaw8]

I had to go back and rewatch again. Your hands and skin is so beautiful.. Wow! Yes I am making a tub full just for myself. Thanks for sharing.

[@aprilmariadonnelly4148]

What about adding vitamin C to this serum?

[@mahnas444]

how pulm oil dissolved without emulsifer??!!

[@dn9306]

How can the final solution possibly be clear when there is oil mixed in? Doesn't mixing in oil make the final solution milky even though it's only 1% oil? Is the result you are showing without the added oil?

[@deealicemoton916]

Right....I have tried twice thinking something would magically happen to turn it back clear but it didn't happen. Didn't think it would, just wanted to see.. I suggest just leaving the oil out and making a moisturizer to compliment the serum

[@dn9306]

@@deealicemoton916 adding essential oils to a gel doesn't make it milky even though the concentration of essential oils could be 0.5 - 1% . I don't know if it's because the essential oils are so volatile and light or if it's simply because the concentration is so low and the cloudiness is therefore barely seen. I'm going to try it again with a regular oil.

[@dn9306]

@@deealicemoton916 A moisturizer with a little wax in it is often necessary to lock in the moisture in the skin.

[@sheryldique9367]

Why don't you post videos anymore. So informative were those.

[@lareina3194]

Hi I know it’s an old video but May I use aloe Vera juice if I don’t have the water you used please

[@sandhyasingh944]

What should be the pH of the product

[@carey-loujones7860]

How come you don't need an emulsifier when mixing the oil into the water ?

[@dn9306]

The gel is enough to hold very small amounts of oil.

[@kure5596]

Thank you for a wonderful formula! don’t we need to add emulsifier since adding plum oil to water? Thanks so much!

[@nathashamorgan9528]

Hi I made this serum as per your tutorial but I didn't have tetrasodium gluconate, but my serum didn't come out clear as yours, it was a milkish color. Please advise why?

[@TKOrchids]

Thank you for sharing! Cant wait to make this! Wondering why you heat up the water? Do you need to or can it be made with room temp?

[@Kikitil]

TKOrchid she added a preservative.they need to be added at a particular temp

[@kingstonmatias1979]

Not sure if anyone cares but if you're stoned like me atm you can watch all of the new movies on InstaFlixxer. Have been streaming with my girlfriend during the lockdown =)

[@orionodin368]

@Kingston Matias Definitely, been using instaflixxer for months myself :D

[@infusionofstylesdesigns7658]

Great video minus the one ingredient detail of how much "Plum oil" or any other oil to use? Thanks!

[@EssentialLabsOfficial]

Hi! Good catch, you can add 1 Tablespoon or .040lbs. Thanks for checking in!

[@dn9306]

@@EssentialLabsOfficial So 0.5% oil will not make the solution milky/cloudy? This is true for essential oils but I have not tried it with any other oil.

[@katherinewells8987]

Thank you for this video, i have a question, when I add the oil to the formula it takes on a milky color. Is this due to the type of oil I'm using? (Rosehip and/or Squalane) they both turned it milky. I have since ordered Hyaluronic Acid Power from you and will see if in fact it is the quality of hyaluronic I am using. I would love to add oil to my formulation.

[@Lo-lx2iq]

If i wanted to add extracts, such as 2 different extracts, how much can i use in this formula?

[@grinchlette]

I e always wanted to add hyaluronic to Rosewatet Creme. Possible?

[@gotahavit]

Thank you for the tutorial - Can you share what the name of the beaker style container is that you use directly on the hot plate. I absolutely love and swear by hyaluronic acid and would love to start making my own! Thanks again.

[@sarahskinglow1979]

Thanks a lots,this is the best when it comes to teaching formulation

[@cytamayo5452]

Hi I can't find Tetrasodium Glutamate Diacetate. How about EDTA? Thank you❤️

[@EssentialLabsOfficial]

We sell Tetrasodium Glutamate Diacetatewww.essentialwholesale.com/product/2625/tetrasodium-glutamate-diacetate

[@QueenieNewYork]

Thank you!! Buying ;)

[@michelle.denise]

How many 1oz bottles with your kit make?

[@cheshahale]

Thank you so much for this tutorial. Something I plan on creating. I want to know if there is a natural alternative to Phenoxyethanol and Tetrasodium Glutamate Diacetate? I was doing research and just wanted to know. Thanks in advance.

[@chelseyummali]

could you use botanical water?

[@dn9306]

Yes!

[@mrembo25]

The ultra low molecular weight hyaluronic acid penetrates the skin better and is said to be more effective at hydration than the heavier molecules

[@dn9306]

Yes but it also causes inflammation. Source: pubmed.ncbi.nlm.nih.gov/31405034/ Anti-inflammatory effects for high-molecular-weight (HMW) HA and pro-inflammatory effects for low-molecular-weight (LMW) HA effects were found for various myeloid cells, including microglia.

[@sofisofiah642]

Maaf.serumnya di biarkan 24 jam tidak ya.terima kasih

[@youtubeprincess9169]

loved your video, can you please clear my dout, when everyone is making hyaluronic acid in cold water, why your making in hot water, does is make a difference ?

[@EssentialLabsOfficial]

Hot water just causes it to gel faster, so I can get a better idea of how thick my serum will be sooner. Cold water, I have to wait (-:

[@dn9306]

Yes it will speed up the thickening process and if the water is hot enough it'll kill at least some of the microorganisms that might be present in the hyaluronic acid powder. You'll still need a preservative though but still...

[@MidwestGirl]

Can you provide a link to the information on the blog you referred to? Thanks.

[@EssentialLabsOfficial]

Certainly- here is the link: library.essentialwholesale.com/hyaluronic-acid-in-skincare/

[@Kikitil]

May I ask why you choose these particular preservatives. Is there any other that can be used.

[@EssentialLabsOfficial]

I chose Phenoxyethanol because it is common and easy to find but certainly other preservatives would work. I’m a big fan of Spectrastat G2 for water based serums.

[@Kikitil]

Essential Wholesale & Labs Thanks for asking I’m looking forward to making this serum I was just looking for a safe preservative.

[@Kikitil]

Essential Wholesale & Labs you didn’t let use know ate wha percentage you added the oil in.

[@neerakaria0518]

Hi. Is the Dalton mentioned on the product itself on your website? So can you please mention the Dalton of the one you used ? Is it the hmw one?

[@EssentialLabsOfficial]

yes we used the HMW in this formula. It gels much more easily than MMW or LMW. So if you chose to use a lower, you might be able to add more to the formula.

[@MidwestGirl]

Thanks for the tutorial! Would you please share what brand mixer you use? It looks like a nice one. Thanks!

[@EssentialLabsOfficial]

We used an All-Clad Immersion Blender. Here is a link to its product listing: www.williams-sonoma.com/products/all-clad-immersion-blender/

[@midwestgirl9192]

@@EssentialLabsOfficial Thanks!

[@aleonm5197]

Is it possible to mix the different types of hyaluronic acid in one serum?

[@EssentialLabsOfficial]

it sure is. If there is more to this questions, please let me know how I can help.

[@michelefreitas4762]

What is a dalton?

[@EssentialLabsOfficial]

Hi Michele! A Dalton is a very small unit measurement of mass. It is commonly used in biochemistry referring to molecular weight.

[@skinprobiotics2600]

hi could we leave out Tetrasodium Glutamate Diacetate .0050 1Tsp

[@EssentialLabsOfficial]

Hi Hang! Yes, but as long as you are using deionized water and no additional ingredients outside of this recipe.

[@entesarageel6422]

could we use ش Distilled water instead of deionized water ?

[@EssentialLabsOfficial]

Hi there, you certainly can use Distilled Water instead of Deionized Water!

[@EssentialLabsOfficial]

as in a hydrosol or distillate? Yes, you could. Bear in mind the pH will be different between deioinized or distilled water than from a botanical water, so be sure to check your pH.

[@sheryldique7123]

Thank you tina.

[@yeshwantmantri3941]

Pls share your measurements in grams pls thanks

[@dn9306]

You have the percentages

[@jasmorgan94]

could you make a Vit A serum the same way?

[@EssentialLabsOfficial]

Vitamin A is a fat soluble vitamin so in cosmetics it would be dissolved it in oil. This particular serum is water based with no oils, so probably not a good option for this recipe. You could add beta carotene though, which is a precursor to vitamin A. It’s water soluble and also creates a beautiful color.

[@massanelli]

@@EssentialLabsOfficial how can you say NO OILs when you just put PLUM OIL in it?

[@flaredebeauti8902]

Please note that this recipe has not been challenge tested for preservation efficacy. If you use this recipe for market sales, it is up to you to ensure the safety of the product.