How-to | How to use Purion 200

[@Erafune]

Finally !!!! I hated the old "1990 table alarm clock" Purion display. And the too big "slap-a-phone-on-your-bike" Kiox/Nyon displays. Took you long enough. Now I might actually consider a Bosch e-mtb. Good job! Been running Shimano and their consumer hostility is driving me away. Cant enable/disable lights. Unrepairable motors. Never again.

[@Doratheexplorer151]

I have a Borch Active line plus with an older Purion display. Can I upgrade to the Purion 200 display. And if so, can I do it easily by myself. ☺️ thanks

[@boschebikesystems]

Hello Doratheexplorer151, you can find out here : www.bosch-ebike.com/en/service/productcombinations - which products and features are compatible with each other. The components of the Bosch eBike systems 2 (your Purion) and the smart system are not compatible with each other. For example, you cannot retrofit your Bosch eBike system 2 eBike with the LED Remote, Kiox 300/Kiox 500, Purion200 or PowerTube 750.

[@Doratheexplorer151]

@@boschebikesystems thanks for the answer.

[@S2_Fresh]

Say a bike is equipped with the original purion display and system. Would it be possible to upgrade from that to the purion 200?

[@boschebikesystems]

hello s2fresh177, the components of System 2 (Purion) are not compatible with the Smart System (Purion 200). In this case, upgrade is not possible.

[@S2_Fresh]

gotcha. Thank you!@@boschebikesystems

[@zjedinite]

Hi there! Is this product available in the US? I can’t seem to find it anywhere. Also just confirming, this is for the Bosch gen 4 performance CX smart system, correct?

[@boschebikesystems]

Hello zjedinite, yes! Smart System products are also available in the USA. You can only purchase the product from your seller. Please check availability with your dealer: www.bosch-ebike.com/en/service/dealer-search# . When it comes to compatibility, I agree - this product is only compatible with the Smart System. Check product compatibility in the link: www.bosch-ebike.com/en/service/productcombinations#displays.

[@zjedinite]

@@boschebikesystems ok great, going to check out those links. Ty!

Ben FOCUS SAM2 6.9 BIKE 2021 model bisiklete sahibim. Bosch Performance CX Gen4, 85 Nm, 250 W. sahibim. Purion ekranı the smart sisteme led remote ve kiox 500'e çevirebilir miyim? teşekkürler

[@boschebikesystems]

Hello Bisiklete, where are you located?

@ ın Turkey. Burada Bosch servisi yok.

[@frafra224]

I dont want my trip to auto-reset is there anyway to prevent it or at least make it longer than 7 days?

[@boschebikesystems]

Hello frafra224, you can find the settings for the automatic trip reset in the eBike Flow app under Settings > My eBike > Auto. Reset trip. Select the desired time period. More about reset trip you can find in the following link : www.bosch-ebike.com/en/help-center/ebw-kiox300-settings/asset-asf-00142#:~:text=You%20can%20find%20the%20settings,Select%20the%20desired%20time%20period.

[@frafra224]

@@boschebikesystems Yeah theres on 4 options: -every day -next day -every 4 days -every 7 days Please update and give us the option to never auto reset like the purion 1. I need it to know when to oil my chain.

[@boschebikesystems]

Hello frafra224, you can only choose between 2 hours, 4 hours, the next day and after 7 days. However, we will forward your suggestions to the appropriate department.

[@MatthewWhitehouse-o4z]

Does the software need to be updated?

[@boschebikesystems]

Hello user-fs7yl1vs5x, You can check current updates at the link: www.bosch-ebike.com/en/service/software-update . The current version for Purion 200 is: 9.8.5 . You can search for an available software update under Settings in the Flow App (cogwheel symbol) > Your eBike

[@Hussamalgburi]

Can I change the speed of the bike?

[@boschebikesystems]

Hello user-qn5kj4wc7x, we do not recommend changing the speed of a Bike that has been programmed with a given configuration/for a given country. Remember that tuning is associated with the loss of warranty. Please read about it in the following link: www.bosch-ebike.com/en/help-center/asset-asf-00204.

[@MartaMake]

I am getting a notification on my purion of low battery, how do i change the purion battery?

[@boschebikesystems]

Hello MartaMake, you can change the internal batteries - 2 x CR2016, 90mAh button cell batteries are required. Please remove the on-board computer from the handlebars by un-screwing the fastening screw of the on-board computer. Open the battery compartment cover using a suitable coin, remove the used coin cells and insert the new CR2016 coin cells. You can obtain the coin cells recommended by Bosch from your bicycle dealer. When inserting the coin cells, ensure that the polarity is correct.

[@boschebikesystems]

Hello MartaMake, you can change the internal batteries in your Purion display - 2 x CR2016, 90mAh button cell batteries are required. Please, find the instruction for changing the Coin Cells on the following link: www.bosch-ebike.com/fileadmin/EBC/Service/Downloads/Bedienungsanleitungen/MY2025/BES2/Purion_BUI215/Purion_BUI215_MY25_WEU_oReg_v1.pdf?_=1719491180.

[@galahaaad]

Suggestion - Purion display should be equipped with USB-C port for charging phone

[@boschebikesystems]

Hi, thank you for your comment. We will gladly pass on your request internally. If you ever think of changing from Purion to Intuvia or Kiox, these two offer charging possibility of your phone.

[@MrHaihui]

How can I change the display language from German to English?

[@boschebikesystems]

Hello MrHaihui , In this situation you probably need to update your eBike. Then - changing the language is available in: My eBike - My Purion - settings - Langauge. Purion 200 supports the following languages: English, German, Dutch, French, Italian, Spanish, Portuguese, Japanese, Korean, Traditional Chinese, Swedish, Danish, Polish, Czech and Norwegian. How can I update my smart eBike system wirelessly? Instructions in the link below: www.bosch-ebike.com/pl/help-center/asset-asf-00640 .

[@MrHaihui]

@@boschebikesystems I will try, thank you!

[@sylvaindumarest3779]

Bonjour j'ai un purion 200, et souvent la batterie du purion s'affablit plus vite que la batterie du moteur, de fait je ne peux pas rouler plus se 40 km alors que l'autonomie moteur elle est largement supérieure. Comment cela est il possible ?

[@boschebikesystems]

Hello, the Purion 200 is normally supplied by the eBike battery like the drive unit. The behaviour you described needs a further analysis. We invite you to go to your local dealer in order to check your eBike and components. To find your Bosch eBike dealer near you, we invite you to follow this link: www.bosch-ebike.com/fr/service/recherche-de-revendeurs/

[@claremontinteriorsmw]

I like it Nice display simple to use

[@ronhoek69]

Suggestion: Never ever use the colours red and purple ever again on this display, because on a sunny day with sun glasses on, you cannot see it anymore.

[@boschebikesystems]

Hi Ron, thank you for your comment. We will gladly pass on your request internally.