How To Increase Fox DHX2 Coil Stroke Length

[@Paulokun7]

Good video. Do you know how this would effect what spring rate I would need? If I went from a 50mm to a 55mm travel, would I need a... let's say a 450lb spring instead of a 500lb spring, or would I need a 550lb spring. I'm thinking I would need the 450lb spring since I increased to 55mm but could be wrong.

[@adampaulsen6650]

Hi! lovely video and helped me a lot! Have you noticed any difference after you cut the spacer off or does it feel excatly the same as before? Cheers!

[@lovropavic7601]

do you unscrew the eyelet or just pull it off

[@colchilibeck]

I did not unscrew the eyelet. I just cut the spacer off. If you want to remove the spacer without cutting it you will need to complete more disassembly.

[@lovropavic7601]

@@colchilibeck I don't want to cut it off cuz I'll need it later but if I need to disassemble the whole shock in order to remove it, thought I could just unscrew the eyelet and slide the spacer out🙁

[@colchilibeck]

@@lovropavic7601 You will need proper soft jaws to hold the shaft from spinning. Might be best to have a LBS do it. I cut it off as I knew I would never want to shorten the travel in the future.

[@lovropavic7601]

@@colchilibeck oh okay man, thanks a lot for the help👍🏽