Great video! Looking forward to more from this series as learning to do my own maintenance is something I’m very interested in.
@jonmaloneycycling75932 жыл бұрын
thank you
@davemacklin92442 жыл бұрын
Good job Jon. Thanks for taking the time to show us this stuff. I think having electronic shifting kind of spoils us on not having to be so anal on the tune part. Also not sure yet I just did this to my chain is Hot wax. Sounds like its a lot less time consuming to clean after the initial stripping of the chain and the chain runs quieter and lasts longer. Time will tell on this though first run at doing this. Keep up the good videos
@jonmaloneycycling75932 жыл бұрын
thank you for your comment!!
@donwinston2 жыл бұрын
Two bikes are better than one if you can afford it. I don't even try to fix my bike anymore because I usually make it worse. My local bike shop loves me.
@jonmaloneycycling75932 жыл бұрын
Lol nice!!
@nationsnumber1chump2 жыл бұрын
Definitely check your spokes, like before every ride. Especially if you are a heavier rider. Even out of the box the spokes can be loose or loosen up over time. It is very difficult finding a good wheel truing shop in some locations but critical component.
@jonmaloneycycling75932 жыл бұрын
good point, thanks!!
@davidknights9062 жыл бұрын
looking forward to the next video Jon, cheers for doing this series
@jonmaloneycycling75932 жыл бұрын
thank you!! glad you enjoyed
@terryburke86342 жыл бұрын
Looking forward to the rest of the series.
@jonmaloneycycling75932 жыл бұрын
thank you
@divinemercy70362 жыл бұрын
Another great vid! Thanks Jon keep them coming
@jonmaloneycycling75932 жыл бұрын
thank you
@jdavidlim10982 жыл бұрын
thanks for the video, it's a great intro for the necessary info
@jonmaloneycycling75932 жыл бұрын
thank you
@johnlatvenas5902 жыл бұрын
Can't wait to follow along. With the first video could you talk about the must have tools.
@jonmaloneycycling75932 жыл бұрын
Great idea, will do!
@michaelstoecker41782 жыл бұрын
Outstanding video, Jon! Very informative - excellent demonstration of basic inspection of the major components. I need to do this more frequently, and I need to start doing my own maintenance …. 👏👏👏
@jonmaloneycycling75932 жыл бұрын
thank you!!
@TamEroom2 жыл бұрын
This was super helpful! Thank you. More of these maintenance videos would be amazing.
@jonmaloneycycling75932 жыл бұрын
sure thing!!
@U.s.e.r.34932 жыл бұрын
Solid checks 🤙🤙
@jonmaloneycycling75932 жыл бұрын
thank you
@DGA06022 жыл бұрын
Very informative video. Looking forward to the rest of the videos in this series.
@jonmaloneycycling75932 жыл бұрын
thank you
@marknacional63882 жыл бұрын
Excited for your future maintenance vids!
@jonmaloneycycling75932 жыл бұрын
thanks!!
@andreluissilva8692 жыл бұрын
Zero friction release a recent instruction of how to tell if the sprocket is worn out . Unior also have a sprocket worn indicator.
@jonmaloneycycling75932 жыл бұрын
thanks for the comment
@VeganDeelite2 жыл бұрын
Great video! 😍🙌🏼
@jonmaloneycycling75932 жыл бұрын
Thank you!!
@Raptors05242 жыл бұрын
This is really good! Thank you for doing this!!!
@jonmaloneycycling75932 жыл бұрын
thanks for tuning in!
@zaahierstanley9552 жыл бұрын
👌
@jonmaloneycycling75932 жыл бұрын
thanks!!
@bubby3722 жыл бұрын
Hey Jon, enjoyed the video as usual. By the way, how tight do you make a stem cap bolt? Thanks!
@jonmaloneycycling75932 жыл бұрын
Thanks so much. I think it is 5 to 10 Foot pounds
@daniellucente44092 жыл бұрын
Great and helpful video! Will you please do a video on how to remove and maintain your pedals? Can you possibly share how to easily remove them and what tools are needed? Thanks!
@jonmaloneycycling75932 жыл бұрын
Thanks so much! Great idea, will do!
@daniellucente44092 жыл бұрын
@@jonmaloneycycling7593 Thanks! I'm always confused by right side and left side. I'd like to be explained that the right side is the drive side and the left side is the non-drive side. From there what direction do you turn your wrench to remove pedals: clockwise or counter clockwise.
@damoncox28592 жыл бұрын
Very good content. 👍
@jonmaloneycycling75932 жыл бұрын
thank you
@budikuesal77222 жыл бұрын
great video.. which brand do you use for the chain?
@chrisvong51182 жыл бұрын
Hi Jon, I'm currently building up a 2022 Madone SLR right now. I'm not sure if you've covered it, but what are your thoughts on the isospeed issue associated with this frame? I've come across a few threads where a specific red loctite was recommended. Not sure if you've covered this before, but If possible, I would like your input. I know you previously had a Madone, sold it and then bought another. So I was wondering if this was ever a concern for you.
@jonmaloneycycling75932 жыл бұрын
Thanks man, I think this is only an issue with heavier people, I have never had an issue and this is what my trek dealer told me about it