How To: Install 19-23 RAM 1500 LED Headlights | FORM Lighting

[@codybattenfield]

Review for 2019 RAM 1500 Form Lighting Installation Video Bottom Line Up Front (BLUF): We are highly impressed with the brightness of these headlights and daytime running lights. Compared to the stock halogen headlights, these are a HUGE improvement. Installation Video: This is one of the best installation videos I have seen for truck parts. The use of red circles to highlight the bolts/screws to be removed was particularly helpful. We often paused the video at these points for clarity. Installation Challenge: We encountered a minor issue. The video instructed that for factory halogen lights, we needed to install both the LED adapter and the pigtail. However, we found that the pigtail would not connect to our factory wiring. We proceeded with just the adapter, and fortunately, the lights worked perfectly. Initial Use: On the first attempt to use the high beams, we noticed some flickering in the driveway. But after a short drive and toggling the switch a few times, the issue was resolved, and we haven't had any problems since. Time and Difficulty: The installation took the two of us about 1 hour and 50 minutes. The most challenging part was removing the two bolts inside the fender. Lesson Learned: Pushing the inner wheel well liner out of the way (towards the engine) allows you to fit your hand inside of the wheel well and access the bolts with a small 10mm socket/ratchet. Otherwise, it's a slow and tedious process to make 1/8th inch turns with a regular wrench. Overall Impression: We are thoroughly impressed with the design, build quality, and the extreme light output of these headlights. They not only enhance the look of the truck but significantly improve visibility.

[@formlighting]

This is fantastic! We really appreciate you taking the time to write such a detailed review of our product. We apologize for the confusion with the install video. We have learned that the install steps we used originally are incorrect, but have not had the chance to go and refilm a new install to resolve this within our video. What we have done is update the written instructions you have access to. Our apologies again for the conflicting instructions, but when installing them just reference the written portion during this section and disregard our video install for now. We are working towards a less confusing solution. Thanks again for the support and we appreciate the time you spent writing such a lengthy review. If you have any questions please don't hesitate to reach out!

[@HamletQ]

Do the two cables connect to both lamps or just to one? (I have factory halogen lamps)

[@jamesp7098]

I just purchased a set of these and I have factory LED - will I need to use the drl harness or no? Also I’m glad I kept my old headlights for that mounting piece on the bottom of the light.

[@formlighting]

If your truck has full LED headlights from the factory you will be using the adapter harness with the purple lead, and will not need to use the DRL fuse tap harness. Please don't hesitate to reach back out with any other questions! You can reference this video as well during installation as we cover it all here.

[@MandoA2345]

I just ordered a set super excited! Just a quick question tho my truck is a lone star so it does have halogen lights as of now do I need to purchase another wiring harness or does everything come included ? Asking so I can order before I try to install and my truck is a 2024 so I’ll see if they work 😅😂

[@formlighting]

We include everything you will need! Any adapters necessary for certain models are included! No extra purchases!

[@wenleo5150]

I have a 2020 Lonestar and these headlights were not compatible with my truck. Form Lighting says they don't have any LED assemblies that fit my truck.

[@SyrupCanuck]

How will these hold up to weather and UV over time and what warranty do you have?

[@formlighting]

We offer a standard two year warranty on all our product as well as the best customer support in the industry! The reason for a 2 year warranty is that LEDs are expected to fail within the first two years. Generally once they surpass that window the life expectancy is around 40,000 hours. Our lenses are made of durable UV-coated polycarbonate that will not fade or yellow overtime.

[@SyrupCanuck]

@@formlighting Where can Canadians buy your headlights?

[@formlighting]

@@SyrupCanuck You can buy directly from us, or you can use the find a dealer tool on our website to see if we have any dealers near you with our products stocked!

[@iramrodriguez2003]

Hello, where can I buy a harness to adapt those LED headlights?

[@formlighting]

We include all the harnesses and adapters needed for these to fit your 5th gen truck! These are not compatible with the Longhorn, Limited, and TRX trims due to the headlight design being totally different. Even with the proper adapters it wouldn't work because the housings are different sizes.

[@iramrodriguez2003]

@@formlighting I want to install them originals from the bighorn but they don't fit, do you know where I can get the harnesses to put the bighorn ones on?

[@formlighting]

@@iramrodriguez2003 Do you want to use our harness to install the OEM LED headlights on your truck? If so, that is not something we offer, and the adapter harnesses for our headlight would not work on the factory LED lamps.

[@cleor2969]

I installed these on my 2022 Ram Laramie 1500, I’m getting an error code saying my right turn signal is out do you know how to fix that? I went from OEM Ram LED to these Form headlights

[@formlighting]

Hey there! We are sorry to hear you are having troubles. This is not an issue we are used to seeing but seems like you might need some resistors. I will have you reach out to our customer service team and they will gladly help you resolve this. I will also pass your name along so they know to lookout for your message. Here is their info: Hours: Monday-Friday 10 a.m. - 5 p.m. Email: [e-mail] Phone: [phone]

[@osubuckeye502]

Can I change out the led bulbs if I wanted to?

[@formlighting]

Hey there! These feature a sealed LED Board so you don't have to worry about changing any bulbs.

[@martinvarela3701]

Headlights automatically turn on when in gear, anyway to disable this?

[@formlighting]

Hey there! That is a function of your vehicle. We would suggest diving into your vehicle function settings to see if there is a way to switch that off!

[@aberham2255]

On my 2022 ram 1500 Bighorn got ready to install and I’m gonna need a damn adapter which no one carries for some reason. 😢

[@tesstickle6994]

Did your original halogen headlights have 2 harnesses connected to them?

[@formlighting]

Sorry to hear you are having troubles. These should be fully plug and play with all 5th gen 1500 models. If you did not receive the included adapters please contact our customer service team and they will be gladly help resolve this issue. Hours: Monday-Friday 10 a.m. - 5 p.m. Email: [e-mail] Phone: [phone]

[@aberham2255]

Just got email from Ford explaining that the installation video was wrong so I got it corrected. Thanks for the help.

[@MandoA2345]

What’d you do differently?

[@formlighting]

@@MandoA2345 After some testing our team has learned that trucks with factory halogens do not need an adapter at all, and the adapter with the purple lead is for trucks that came with LED headlights from the factory.

[@MacD501]

Is it safe to say these will also fit in the 2024 Rams? It doesn’t appear that anything has changed in the 24 models vs the 23

[@formlighting]

We have not been able to confirm compatibility for the 2024 models just yet, but you are more than welcome to try it out and take full advantage of our return policy if it doesn't work!

[@ivanherrera2394]

Price i need adapter to big horn 2021 ? Direc fit?

[@formlighting]

Hey there! We include all the necessary adapters and harnesses for our headlight to bolt directly to your vehicle. They are fully plug and play and you won't need to order any extra adapters!

[@charlesazompae7976]

My lights are on automatically and can do not go off when I use the switch unless my engine is off any solution?

[@formlighting]

Hey there! Sorry to hear you are having issues! I will have you reach out to our customer service team and they will gladly help resolve this for you. Hours: Monday-Friday 10 a.m. - 5 p.m. Email: [e-mail] Phone: [phone]

[@MTZProject]

Are you guys gonna make headlights for the f150s?

[@formlighting]

Stay on the look out for future releases!

[@larryinokc]

This video is as clear a mud, and differs greatly from your online installation instructions. Your online written instructions state that only one harness is needed for replacing Rams with OEM Halogen lights, and this video shows both harnesses being used. I have spent hours on the phone with you people trying to get a solid answer as to proper installation to no avail, as it appears that not even customer support can give me a definitive answer on installation. VERY frustrating. There HAS to be somebody at Form Lighting who knows how to correctly install these lights.

[@formlighting]

Sorry to hear you are having so much trouble. We are working to update this video with the proper instructions. The link you receive with the product takes you to an install guide with up-to-date instructions. This explains the correct way to install it. We have to create an entirely new video which takes more time. That is why there is a difference. Please be patient with us as we work to resolve this issue. Have you gotten them installed or are you still having issues?

[@larryinokc]

@@formlighting I got them installed using a single harness. They immediately threw an error code, and the high beams wouldn't work. I took the pickup to Dodge and they cleared the codes. The headlights started functioning properly after that, haven't had any problems since then. You guys are supposed to be sending me some updated harnesses asap. Love the way the lights work!

[@monkeyone24]

@@formlighting I just installed into 2023 big horn with Halogens and didn't need the adapter so only used one of the connecting plugs on each side. Never plugged in the purple connection since the non compatible adapter has one of the purple connections. Everything seems to be working ok, but it sure would be helpful if you updated your video. Part of me is sketched that even though it works, It may ultimately lead to electrical issues. I would be nice to know if did it correct.

[@formlighting]

@@monkeyone24 The written instructions you are given explain the correct way to install your harnesses, and if they are needed. Updating the video install takes more time so sorry for the inconvenience. If you have any questions regarding install please contact our customer service team and they will gladly help resolve this until we can update the video with the same information as our written install guide. Hours: Monday-Friday 10 a.m. - 5 p.m. Email: [e-mail] Phone: [phone]

[@carlitos5876]

After reading some of the comments, no way I’ll switch my headlights to these. Granted, mine is a limited with OEM LED lights

[@LambOfTheLion]

Do these headlights use actual LED bulbs? I’d rather not have to buy an entire assembly if the lights go out and they don’t use bulbs that I can replace

[@formlighting]

Like many other options on the market our Headlights use a sealed housing that contain a solid LED board. This means that you cannot replace individual bulbs. We cover them with our standard two year warranty. LED failure is known to occur within the first two years of use. After surpassing that window the life expectancy is around 40,000 hours. You will also get the added benefit of our top notch U.S. based customer support team.

[@Jeepjklife]

Why don’t the mirror turn signals blink in the video

[@formlighting]

Hey there! We aren't entirely sure. That isn't something we ever have to alter during installation so it is probably due to the vehicle being off during this shoot.

[@Jeepjklife]

@@formlighting ok, I have your lights coming on Friday and they will be installed Friday! Can’t wait

[@geovanicarrillo4264]

@@Jeepjklifehow were they??

[@Jeepjklife]

@@geovanicarrillo4264 they are great the only issue I have had is in the cold 30° and below the high beams don’t want to work but other than that great!

[@franciscorobles2357]

Do these work with the 4th gen ram?

[@formlighting]

Unfortunately, these are only compatible with the 5th Gen RAM. We are planning on releasing a 4th gen option in the near future!

[@cryptoking0410]

Leave it to ram/fiat to seriously make a headlight replacement a ten hour job. What a joke!

[@formlighting]

While there is some unique extra steps you may have take to disassemble the RAM, these headlights are fully plug and play so install is a breeze! As long as you keep your hardware organized dissembling it is really not that long of a process. Total Install time without all the filming in-between is expected to be around 1-2 hours which is standard for most headlight upgrades.