How to Install 2015+ Dodge Challenger RGBW™ DRL LED Boards | Diode Dynamics

[@_Projectsolace]

This is the route to go IMO. I dislike the outside leds most go with that show the segmented leds.

[@alexandertheodosiou9195]

I bought these yesterday but was wondering if they will mess up my turning signal. Also your customer service is great.

[@diodedynamics]

+alexander theodosiou - The boards are wired in the same as the factory setup, and as a result your turn signals will function the same as they would when stock. Feel free to give us a call and we would be happy to explain this in more depth.

[@michaellighter]

Thanks for the product and video. Just what I have been looking for!

[@sosaboomin4560]

Question… once this is installed, you wont get the normal drl? You know the solid orange color thats used for the turn signals?

[@diodedynamics]

Go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you answer that question!

[@bueno_2728]

I've been having problems with mine it keeps killing my battery

[@lundensmile2]

idk why anyone would dislike this haha

[@rothsamphors7377]

Great stuff!

[@diodedynamics]

Thanks for the support, Roth!

[@333jellybeanz]

just got them had a small issue but you guys are taking care of me just curious as to where you guys hid all the wires or if you have any suggestions as to where I can put all my wiring so it's not a hot mess under the hood ?

[@diodedynamics]

+333jellybeanz Shoot us an email at [e-mail], and we can help you out!

[@bradinbiehn7005]

The remote controlled the man uses in the video is not in the package when you buy the Headlights, where can I find the handheld remote?

[@diodedynamics]

Check out this link to see all the multicolor controller options we offer: www.diodedynamics.com/accessories/rgbw-rgb-multicolor-led-controller.html

[@samanosukeakechi4388]

My 17' T/A Dodge Challenger driver side halo only lights partially when using Turn signal, Dash says "Turn signal out". Would replacing those boards help fix this? Or will the rings still not light completely, and "Turn signal off" will continue???

[@diodedynamics]

Unfortunately, the turn signal is a separate inner board that is not touched with our boards. Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you!

[@victhebric66]

Question, are these brighter than the stock halos? Only asking because on the road, the stock white halos are very dim compared to the Charger's daytime running lights and I personally don't think that's fair.

[@diodedynamics]

Hi there! Yes, these will be brighter than stock. The factory halos use small 1210-size LEDs, while our replacement boards utilize high-power RGBW LEDs instead!

[@rosendovelazquez5772]

when installed will all the lights and halos turn on automatically as if it were factory-installed

[@505BARRAZA]

Any instructions on how to pull the headlight apart? Like what temp to bake and how long??

[@diodedynamics]

+Angel Barraza Check out the link below for a video that shows how to open the headlights on a Fiat 500. The process is the same for your Challenger. Also, if you do not feel comfortable doing this yourself, check out the other link below to find one of our Authorized Dealers/Installers near you! If you have any further questions, please don't hesitate to contact us! Fiat 500 video: kzbin.info/www/bejne/l3bSZXmQqrGhd7M Dealer/Installer Locator tool: www.diodedynamics.com/store/index.php/find-dealers/

[@505BARRAZA]

thank you

[@505BARRAZA]

Diode Dynamics thank you

[@ruffytaroo2561]

Can i also use a normal led Remote i have one at home

[@diodedynamics]

You would have to custom wire it together, however, it could be possible. For the easiest install, we highly recommend using either our Bluetooth controller or the controllers we offer for the RGBW kits! www.diodedynamics.com/products/accessories/rgbw-rgb-multicolor-led-controller.html

[@RealityCheck4515]

my audio connection dealer is paranoid about removing the headlight covers saying they don't always completely seal back. They say some customers have come back saying water has gotten into the headlights. Is this really a problem? Also, is there a Diode Dynamics dealer in my area that can do the install (21207, Baltimore)?

[@johnzenone6826]

I just order a set for my 16 scat pac shaker can I wire them into the light switch and to a hot wire for show that way I don't have to have the headlights on at car show,s and way is there a 4-6 week wait

[@UnfamousRT]

Will I still have the orange halo effect in the day time 😢 or does it eliminate that ?

[@diodedynamics]

With it being RGBW, you can choose any color, including amber!

[@JXKEOFFICIAL]

I'm curious if you took the bumper off to get to the headlight housing? Is this what you did?

[@diodedynamics]

+Jake Murrell - Yes, the front bumper has to be removed on the challenger in order to remove the headlights.

[@raymerriflerebellionbryson188]

Just got mine in the mail today was wondering were you guys put the wires? Would really appreciate it if you guys responded thanks!

[@diodedynamics]

+Raymer Rifle Rebellion Bryson Shoot us an email at [e-mail], and we can help you out!

[@NoctuleBat]

Just curious but will you guys be making these for the 2015+ Charger?

[@diodedynamics]

GTVenomis, we have some fun things in the works for our 2015+ Charger friends! ;)

[@Sinn0100]

I know this is old but will this work with all Challenger's?

[@diodedynamics]

These should work with all 15-21 models!

[@gshotthat3279]

can i use the white color on these as actual headlights on the road at night? or is it not bright enough, i want my lights at night to look like the DRL. But stock DRL of course are not bright enough.

[@diodedynamics]

Great question! Our DRL (daytime running light) LED boards are not intended to illuminate the road for nighttime driving.

[@hre5183]

Will these only fit 2015+ models or older challengers as well ?

[@diodedynamics]

+Jayden Hippolyte, this product is only compatible with 2015+ models. Our engineering team is constantly developing new products, so it is possible that we could come out with a version that would be compatible with the older models. Stay tuned to our social media pages for any new product releases!

[@hre5183]

+Diode Dynamics That's great news really hope u do will defiantly be a customer

[@Ian-xw1ge]

Can you use Diode Dynamics lighting system on a 2013 SRT8 392 Challenge?

[@diodedynamics]

+Ian Garnes These boards were computer-designed for the 2015+ Challenger. However, check out our HD LED Halos at the link below! They come in a variety of colors and standard sizes, so they're a great option to get a custom look. www.diodedynamics.com/specialties/hd-halos-strips.html

[@hectorvarela_]

So I finished installing these with the Bluetooth remote and one halo is green amd the other is yellow. Also with the 7 color fade the white is blue and the other purple. Is there a reason for this? Could they be bad boards?

[@diodedynamics]

This is most-likely a wiring issue. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@1SikTA]

Do these lights work when the car is off? Will they stay on until I turn them off? And when I turn the car back on can I still pick the color?

[@diodedynamics]

Hi Jose! These will power-down anytime you turn off whatever power supply you decide to utilize. When you turn the car back on, they will retain the color you had selected before turning them off. If you have any questions about wiring or installation, definitely feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to help!

[@TheWillyjeff]

I watched a video where a guy just plugged the RGBW controller into the factory harness and that was it.. my instructions tell me to plug the controller into a solid-state relay harness and then plug that into a battery input wire and plug that into my battery... do I have to do that last step? If so will it drain my battery over time? Thanks

[@diodedynamics]

Hey William! We definitely encourage following the installation instructions as written. For more detailed instructions, please go ahead and shoot us an email at [e-mail]!

[@ckent1975fm]

Curious...is there a way to bypass the on/off remote module? Point being, I'd like the halos to come on with the parking lights/daytime runners, or possibly wired to acc so they come on when the car is on....all while retaining the remote functions. Having to use the remote on/off every time seems a nuisance. Any suggestions?

[@diodedynamics]

+ckent1975fm, there is! If you shoot us an email at [e-mail], we would be happy to help you wire everything up in the configuration you had described.

[@felipeespinoza22]

so I have everything set up, I just don't know what power source to connect to(fuse box under hood?)

[@diodedynamics]

+Felipe Espinoza, below is a link to our installation guide. On page 2, we have listed the recommended wires to tap coming directly out of the headlight and the sidemarker. diodedynamics.com/docs/install/dodge/challenger/Dodge_Challenger_RGBW_installation_guid.pdf

[@SeanMcMouser]

Where would I get these installed in Portland oregon

[@diodedynamics]

+sean mouser Check out the link below to find one of our Authorized Dealers/Installers near you! www.diodedynamics.com/store/find-dealers

[@AshesFade]

So is it possible to have multi levels of brightness? Like say you need to use your brights on the highway, and then someone is driving past and you need to put your dims back on, can this do that?

[@diodedynamics]

Anthony Ruiz, this controller will allow for you to control the level of brightness, in addition to color! This will be something that you will generally set before you are driving, as these accent lights are not going to blind oncoming traffic like your high beams would.

[@WebcasterProductions]

What would you use for a 2011 that acts much like this

[@diodedynamics]

+Mike Jones Check out our Angel Eye Kit for the 08-14 Challenger at the link below! www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/dodge/challenger/2011-2013-dodge-challenger-angel-eye-kit

[@michaelmayer9901]

after installation, my left turning signal hyperblinks inside my car and notifies me that my LED turning signal is out. but on the outside everything works. What is the cause and how can I fix it?

[@diodedynamics]

Hey there! Our RGBW DRL LED boards do not use the turn signal circuit, so this could be happening if something on that circuit was modified during installation. Please just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail] for troubleshooting help from our Service Team!

[@anthroxs1]

Hola ya lo tengo instalado, pero quiero saber si hay alguna APP, para controlar las luces con el smartphone??

[@diodedynamics]

Yes, there is. Just type in "Diode Dynamics" into the Apple app store or Android app store.

[@dixinormus3282]

Is there a way to have them turn on automatically when the car turns on how they normally would?

[@diodedynamics]

+Thegirlwiththetattoos, you can! Attached below we have a link to our detailed installation guide which can help assist you with what wires to tap into. If you have any other questions, please just shoot us an email at [e-mail] and we would be happy to assist you. diodedynamics.com/docs/install/dodge/challenger/Dodge_Challenger_RGBW_installation_guid.pdf

[@mcm95403]

I SURE wish you'd make them in just plain white to replace the factory ones that fade and look yellowish. Not everyone wants a disco light show on their car.

[@diodedynamics]

Since the filming of this video 8 years ago, we have since offered more Halos options for the 2015-2021 Challenger! Check out the link below to see all the other halo options we offer for the Challenger! The most common of these kits are our cool white 6000k halos, and our switchback halos that function as an additional turn signal! www.diodedynamics.com/hd-led-halos-for-2015-2021-dodge-challenger-four.html

[@freekyyfrank1]

If i wanted to turn these LED's off and use my factory headlights, would i need to use the remote to do so?

[@diodedynamics]

+shayn - You can wire these so that the power is completely controlled by the remote, or you can wire them so that they will function just as your factory DRLs would. So you can set it up whichever way you prefer.

[@Kiaboys392]

@@diodedynamics how do you wire them? To the battery?

[@diodedynamics]

@@Kiaboys392 They will come with harnesses to wire them to the factory DRL harness!

[@antonioovargas]

Hello guys ! My friend is looking to buy a 2012 392 Dodge Challenger , he loves the look of the factory halos as shown here but unfortunately the 2012 model does come with the halos. Is there a kit you guys provide to retro fit anything like it ? Also he doesn't want that individual LED look just a solid white. Hopefully I get feedback thanks !

[@diodedynamics]

+MrSwagg0114 Thanks for reaching out! Check out our HD LED Halos for the 08-14 Challenger at the link below! Our HD (high density) LEDs give them super bright output, and our durable phosphor coating hides the individual LEDs for a solid, uniform appearance. www.diodedynamics.com/store/catalog/product/view/id/23969/s/hd-led-halos-for-2008-2014-dodge-challenger-fog/category/1506/

[@antonioovargas]

Diode Dynamics thanks for the help !

[@harris8390]

Hi, is teal a color option here cos Im not seeing it.

[@diodedynamics]

+Harris Montevallo It sure is! You can use our controller to set these boards to whatever color you like!

[@maresking22]

Is there a authorized dealer in Idaho?

[@diodedynamics]

+Omar Mares We've got you covered! Check out the link below to find one of our Authorized Dealers near you. www.diodedynamics.com/store/find-dealers

[@grupobarranco9609]

hello, what s the item number or model to oder please, thank you..

[@diodedynamics]

+Grupo Barranco, thanks for reaching out! You can click on the link below to order our RGBW DRL LED Boards for the 2015+ Challenger. If you have any other questions, please feel free to let us know! www.diodedynamics.com/store/catalog/product/view/id/22368/s/2015-dodge-challenger-drl-led-modules/

[@MatrIXWarfarE]

does this fit any model of the challenger?

[@diodedynamics]

+Nick Llerena Yes, as long as your 15+ Challenger has the LED boards in the headlights from the factory, our replacement boards will be compatible!

[@MatrIXWarfarE]

Diode Dynamics ok thank you

[@brandongomez1681]

do these fit any type of module for the challenger because I have a 2016 sxt and am planning on getting this if it still fits

[@jehadmohammed9162]

Any authorized installers in Saudi Arabia?

[@diodedynamics]

+Jehad mohammed Unfortunately we do not have any Authorized Dealers in Saudi Arabia at this time. Sorry about that! However, you can use the link below to search more Authorized Dealers, as some will ship headlights for installation as well. If you have any further questions, please don't hesitate to contact us! www.diodedynamics.com/store/find-dealers

[@medoa6]

ركبها بنفسك ما تاخذ وقت ولا رح الغرابي اذا انت من سكان الرياض

[@angelramirez-dh2eq]

hello, I just installed these and i took all the proper precaution when doing so but my left front turn signal went out but the white halo still works fine. Do you have any idea why how I can troubleshoot this problem? Bad thing was I was so excited I installed it that I put everything back before I noticed the problem. Maybe I forgot to connect something in the housing or just wrong wiring ?

[@mrnomad55]

Yea. Do like I did. take them out of your car and send them back. what a waist of time. there Junk!

[@juanmorinigo2179]

Como kito los faros?

[@carlosrueda9517]

tienes que remover la facia

[@aaronlam6929]

Are the stock LED halos available on all challenger models?

[@diodedynamics]

+Aaron Lam thanks for reaching out! Go ahead and shoot us an email at [e-mail], and we'll be happy to look into this for you. If you have any other questions, feel free to contact us!

[@victhebric66]

Yes.

[@justbananaman.8909]

Will the daytime running lights still work?

[@diodedynamics]

+Just BananaMan. Yes! These boards can be switched back to a pure white for daytime driving using our RGBW Controller. If you have any further questions, please don't hesitate to contact us!

[@aprhunter]

Any dealers in Cincinnati

[@diodedynamics]

Hi there, we definitely do! You can find the one nearest you with our Dealer Locator tool! Here is the link: www.diodedynamics.com/find-a-dealer

[@Raider24]

Does the turn single halo turn on Amber automatically?

[@diodedynamics]

Hi there! Our Multicolor Boards don't combine a turn signal function. Your factory amber ring will still function for signaling.

[@ttrevino167]

So nothing plugs into the old connection? If you don't turn on the leds you don't have the running lights right? Have to manually use the remote each time?

[@diodedynamics]

ttrevino167, that is correct. Nothing will need to be done with the old connection, and you can easily use the RGBW remote to control angel eye function. Good questions!

[@rimask5117]

+Diode Dynamics where do I order the converter kit . for the 2015 Challenger LED & how much will it cost me. Can you send me a link where I can order please

[@diodedynamics]

+Rimas K, attached below we have a link to the website listings for the 2015+ Dodge Challenger. If you have any questions, please just let us know - thanks! www.diodedynamics.com/store/catalogsearch/advanced/result/?name=&description=&short_description=&sku=&price%5Bfrom%5D=&price%5Bto%5D=&v_make=Dodge&v_model=Challenger&v_year=2015

[@rimask5117]

+Diode Dynamics thank you

[@smokemboe1876]

This install takes over 12 hours

[@diodedynamics]

Hey there! If you need help getting in touch with a professional installer or anything to discuss your options, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail] and our service team can assist!

[@A42yearoldARAB]

sucks it's like 1k worth of labor to open the light

[@diodedynamics]

+A42yearoldARAB Thanks for reaching out! We do have a great network of Authorized Dealers who can help with installation. Check out the link below to find one near you! www.diodedynamics.com/store/index.php/find-dealers/

[@mrdokabbas]

how much

[@diodedynamics]

+mrdok5000 abbas These boards are $140 (not including controller). Check them out at the link in our video description!

[@RenaissanceBro]

WOW

[@green-fn11]

Shut up and take my money