2015-2020 DODGE CHALLENGER FRONT BUMPER REMOVAL / ORACLE HALO INSTALLATION

[@teachrock4life217]

Most thorough, straight-forward breakdown on how-to remove the front bumper. Great job sir! 🤘

[@onpointcustomauto1289]

happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out

[@archangel9845]

Great video. Super detailed and extremely informative. I was nervous getting ready to remove my bumper. I’m very confident now. Thanks brother 👍

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it

[@jonathanoconnor3836]

I wish all auto guides were this good

[@juanmartinez6413]

Talk about a good detail video thank you friend.

[@KennyLauderdale]

Dude is SO thorough!!!!

[@ganjvchxf]

The 15 ppl that disliked this are hatersss you were hella helpful and detailed

[@deadzgt3562]

Im about to dislike it just due to the wheel well bolts getting stuck on something🤣

[@CQ7String]

Every DIY video should be like this. Thanks very much!

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it

[@chrisbrierly]

Awsome video. Perfect instructions. You may want to update the title to include up to 2022 year models. Just installed lights in 2022, and the instructions are exactly the same .

[@jorgemoreno4636]

Great video, straight to the point and I like how you took the time to review everything y repeat the steps on how to do it 👍🏾👍🏾

[@onpointcustomauto1289]

Thanks man ! I do it hoping you won’t have to watch it a million times

[@KPtheDJ216]

I definitely appreciate how precise you gave instructions. Might’ve been “dumbed down” but it’s definitely needed so there’s no room for error. I’m hoping you have a video on how to remove the rear bumper as well. If not, can you make one 🤷🏾‍♂️

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it… I actually have a challenger in the shop next week for a vinyl wrap I will start making a video for that for you and I will post it in the next month or so

[@1990hondarc30]

Great video, my wife's 19 Scat Pack ate a retread that came off of a Tractor Trailer. It took out the lower grill and one fog light along with scratching the air dam

[@granitecat7077]

Thank you so much for this video and being so thorough. I’ve seen people man handle and scratch up their front bumper trying to replace their front lip. I’m just gonna remove the whole bumper and save the car from getting damaged.

[@onpointcustomauto1289]

happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out

[@jrm523]

Fantastic video! Thank you for taking time to go over all of the important details. I feel like so many people make videos but don't clarify the small details.

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it

[@The.Revnant]

This helped me out so much. Taking out the bolts inside the bumper is the hardest part. Other than that it’s cake. Thanks for having one of the better front bumper removal vids. 👍🏻

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it

[@ZANKUKONI]

Anybody else watching this without owning a Challenger?😂

[@Stomatopods]

+1

[@mahmoodemil3550]

Best straight forward video for this job , thanks 👍🏻

[@fastlyf98]

Excellent video man. Thanks for the detail! This is how its done!!

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it

[@dajonccherry]

This video just saved me so much money thank you man

[@JustLikeKevin.]

This is a great tutorial, very straight forward man

[@Hydraulic67]

This is such a great, thats’s right, I said GREAT video. If this were done for professionals then they shouldn’t have to be watching videos. The dumb down part is great for those of us that refuse to get screwed by a dealer and are mechanically inclined, and maybe even those that aren’t. I’ve worked on heavy equipment for over 37 years and hate automotive work on these newer cars, but your video(s) has made it so easy to avoid the dealers. Hope you pick up a couple lines of merch. Including auto accessories and or parts, I’d buy everything I could from you. I believe the old fashioned way, of ‘he helped me so that’s where I spend my money’ Thanks again!!! I’d like to donate but have never done that, can you help there too? I also good info doesn’t come for free. If it did Doctors would be stupid and at least half of us would be dead. LMAO. I’m serious about the donation though.

[@onpointcustomauto1289]

I’m happy that you liked and appreciated the video please click the like and subscribe button for the future post any videos we would really appreciate it… no worries and no need for the donation we really appreciate the offer though..

[@mohammednifras9994]

Good vedio friend 👍👍carry on

[@onpointcustomauto1289]

Thanks man please sub and share we’d appreciate it

[@Midway41RD]

Thanks so much. Got some things going on with my front and want to so I can see for myself. Appreciate the tutorial!

[@redwingdetroit9671]

Never saw the 10 mm bolts but excellent demonstration thank you

[@Alolan.Vulpix.Getting.Railed]

Thank you for the in depth detail, really appreciate it, great video!

[@christianlara6082]

Damm we all appreciate the video bro 👌🏼 Very detailed on it

[@epi9]

Amazingly well done video. Thank you so much.

[@granitecat7077]

Brother would you recommend me taking of the front clip like you did here to replace my front splitter? (Stock)

[@onpointcustomauto1289]

Yes it would be easier that way you’d be able to do it without braking your back

[@GrofikInstallations]

Amazing! Great details. Thanks!

[@countdracula4656]

Question, once the bumper is removed, is it easy to take the support bracket on the corners and replace them? The top bolt in the support bracket for the fascia on the drivers side in mine pulled out of the plastic grove it sits in, and it's no longer secured in place.

[@onpointcustomauto1289]

Yes there are 2-3 10 mm bolts that need to be removed it’s fully visible and accessible once the bumper is off

[@Woods2288]

Thanks for the video cracked the plastic black outer headlight housing piece yesterday (bumped into my freezer pulling in smdh) gotta pull the bumper and replace it now. My chally has a ball looking sensor in the middle of the bumper though so I know there’s gonna be a wire I gotta unplug somewhere

[@hammerhead6537]

That was a very clear and detailed video, thanks!

[@LuisGarcia-uy8wj]

Will this work for 21 hemi? I need to take off my lip for a more classic look

[@DrunkeyMonkey]

Hi is it possible to put a 2014 challenger bumper on a 2017 challenger?

[@Boostedjasper]

Very helpful info man, Thank you! 👊

[@onpointcustomauto1289]

happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out

[@garbagegut714]

There a video of how to remove the front bumper with stock fender flares??

[@michaelvilla8303]

Say “I’m a 4th grade teacher”… without saying, “I’m a 4th grade teacher”… 😂🤪😆

[@amonlaurenzana1767]

Do you have a video or directions for doing the rear bumber on a 15 challenger

[@granitecat7077]

I was thinking about replacing my front lip (stock valence) but I don’t wanna be manhandling it off. Do you recommend taking off the front bumper so I could have better access to it and also not working under the car.

[@Crystalised-i-8888]

thanks from Germany :)

[@rigoslittleshop9430]

How about the inserts? Almost impossible to

[@EdwardG2424]

How do the turn signals work after the install?

[@b.a.nfrazya]

Can you do a vid installing your fog lights into you new demon grille

[@tomcrowther8990]

How come nobody has how to remove and install a challenge back bumper not one on KZbin anywhere? I have the identical car as the one you’re working on a 2017 green T/A I would love to have a video on the Rear bumper removal. But I got to say the front bumper video is awesome let me know if you’re ever gonna do a rear bumper video

[@johnjimenez2278]

By far the most difficult bumper to line up after a collision hands down

[@kyngpapi]

I have a 2016 sxt challenger can I put this front lip on it?

[@terpynews5458]

nice video bro. nice and detailed. thanks

[@onpointcustomauto1289]

RapFein4Real thanks a lot man really appreciate hearing that man!!! Just trying to help where we can!!! Subscribe to our page if you have a challenger we have a video in the near future we’ll be posting about another one !!

[@ricktietjen8810]

Very thorough! Thank you!

[@sinister6.450]

Awesome video

[@KINGEJD74]

Really helpful brother! Thank you!

[@Bblock150]

Fuck im too scared to do this even though it looks simple lol I need to do this to fix my lower grill but the dealership wants to charge $387 for this 😑

[@averybatts8453]

Very nice video did you saved me alot of money 😹

[@bpreece1]

Removing the Wheels would make access so much easier and faster ....... so you dont have to keep truing the wheel side to side for each remove and reinstall ....

[@eduardopenarodriguez9913]

Muy bien explicado tu video gracias

[@righteous1229]

Thanks helpful video!!!!

[@Redboatcaptain]

can i reuse the rivits under the wheel well or do i need to buy more

[@pupyrivera2254]

You got to buy new ones they are about 34 dollars on ebay (mopar) order of 12, rivetz are only one time use

[@murf3410]

@@pupyrivera2254 what size are the rivets ? Having issues finding replacement rivets

[@KennyLauderdale]

I wanna see the oven part... Nobody shows that?

[@jayurena5693]

Where you guys located?

[@hammerhead6537]

I noticed the plastic rivets, do they need to be a Dodge OEM rivet, or is there an aftermarket rivet that I can use that looks like a Dodge OEM rivet? I have a 2019 Hellcat Redeye if that makes any difference. I will appreciate the help, thanks.

[@onpointcustomauto1289]

hammer head Sorry for the late reply yes you can definitely use aftermarket plastic pushpins Or anything like a plastic around it that would fit there personally when we were movies rivets we insert the same size pool pin that is used on the top covers under the hood they are the same size and can be purchased directly through Dodge as well

[@phillipdale6765]

Thank you very much ..appreciate the video

[@coreyjordan4525]

Awesome video!!

[@jeremyhozian2831]

Great video. Only thing is a bolt and a nut is not the same thing. No big deal though I got what you meant.

[@onpointcustomauto1289]

Lol totally agree . When I’m recording on the fly I mix up a few words but I’m glad you get the gist of it . Sometimes I try to re-record the scene but not doesn’t come out as well so I still go with the blooper reels 😂

[@teachrock4life217]

Well done! Thank you!

[@onpointcustomauto1289]

happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out

[@mikejones4801]

Awesome video Thanks

[@dodginglyfe]

🔥🔥🔥

[@blainexwatson4091]

Thanx bro👍

[@KennyLauderdale]

Thanks

[@zora2142]

I live by the guy who owns this car he lives in my town it’s wayyyy cooler in person shout out too you guys

[@onpointcustomauto1289]

Zora2 yeah he’s a awesome guy too real nice and understanding ! And yaaaasss!!! This ride is awesome video definitely does not do it justice!! Click the subscribe button for future content on rides like this and localities es as well

[@thud9797]

What bulb #?

[@onpointcustomauto1289]

Depends on which set up you have e if it’s halogen it’s h13 if it’s OEM xenon usually ds1 or ds3

[@keithwheeler1905]

I don't think this would be a video titled about removing the bumper from a Challenger, but counting to five course 101. How many times can you count to 5 in one video.

[@KennyLauderdale]

Good video...

[@KennyLauderdale]

I have to take my bumper off BECAUSSSSE I installed my splitter rods into the plastic lower grille... The plastic BROKE!!! Then I started seeing folks with their splitters drilled INTO the bumper... Yikes!

[@scatjox]

Kenny Lauderdale same thing with mine man, it’s so frustrating!! Can you message me on Instagram? My @ is scatjox

[@pantherplatform]

Bolt? Pretty sure that's a nut...

[@onpointcustomauto1289]

Panther Platform but bolt you catch the drift . It’s hard to re-record for the thousandth time over a small mess up. The video is not perfect but you get the jistof it . Thank you for your input . We try to get better with every video .

[@pantherplatform]

@@onpointcustomauto1289 Saul good mane. I have 4 challengers including a demon and hellcat. I'm having it wrapped again and wanted to do the disassembly myself. Not too bad if you can fit your hand inside the fender.

[@cesarswc13]

holy shit its a huge mess with those headlights man, they look cool but man so much work if the directional light goes off you got to do this every 4 years of something lol that is dumb

[@stratman._.]

Not the best tutorial my man. You didn’t really lead by example at all. All you really did was talk and point

[@onpointcustomauto1289]

It’s all left up to opinion brother I’ve got over 30,000 views and you’re one of the very few that thinks it’s not a good video so I appreciate your opinion but I appreciate you watching the video more than anything. God bless you.

[@stratman._.]

You know what you’re right I was rude and I apologize. Hope you can forgive me. It’s a pretty decent tutorial

[@onpointcustomauto1289]

@@stratman._. all is forgiven brother believe me we are 100% good at the end of the day. No one’s perfect but it takes a really big person and mature person to apologize no matter what the situation is. Take care and God bless brother.