How to Install a 7in Touch Screen Radio for a Nissan Frontier

We are going over the steps to install an aftermarket touchscreen radio on a 2009 Nissan Frontier XE. This radio also includes wireless Apple CarPlay and Android Auto (All Built-in).
1. Before/After - 0:01
2. Step 1 (Disconnect Ground Cable) - 0:11
3. Step 2 (Remove Storage Tray) - 0:25
4. Step 3 (Remove Cluster Lid C Screw) - 0:48
5. Step 4 (Detach Cluster Lid C ) - 1:01
6. Step 5 (Disconnect Cluster Lid C Harnesses) - 1:20
7. Step 6 (Remove Audio Unit Screws) - 2:14
8. Step 7 (Disconnect Audio Unit Harnesses) - 2:33
9. Step 8 (Prep Audio Unit Brackets) - 3:39
10. Step 9 (Install Audio Unit Brackets) - 4:39
11. Step 10 (Prep Audio Wire Harness) - 6:09
12. Step 11 (Crimp Wire Harness Set Together) - 8:16
13. Step 12 (Connect Wire Harnesses to Unit) - 8:41
14. Step 13 (Connect Audio Unit Ground) - 9:31
15. Step 14 (Connect Audio Unit Harnesses) - 9:53
16. Step 15 (Install Audio Unit Screws) - 10:25
17. Step 16 (Connect Cluster Lid C Harnesses) - 10:39
18. Step 17 (Install Cluster Lid C) - 11:02
19. Step 18 (Install Cluster Lid C Screw) - 11:31
20. Step 19 (Install Storage Tray) - 11:42
21. Step 20 (Connect Ground Cable) - 11:52
22. Step 21 (Test All Functions) - 12:12
23. Setting up Wireless Android Auto - 12:33
24. Testing Rear Camera Connection - 13:33
Products Used:
This video contains affiliate links for which I may receive compensation.
7-inch Car Stereo Radio - amzn.to/3TVyvsB
Double Din Car Stereo (Backup Link) - amzn.to/4cQU320
Car Stereo Install Dash Kit - amzn.to/3xvBEYB
Magnetic Pick-Up Tool - amzn.to/3BWvqjg
Red Butt Connectors - amzn.to/3UcHR4w
Ring Connectors Assortment Kit - amzn.to/3xy82K4
Trim Removal Tool Set - amzn.to/35Lry84
Wire Stripper - amzn.to/3TP9MpL
Tools:
10mm Socket
1/4" Socket Wrench
Magnetic Pick-Up Tool
Microfiber Cloth
Needle Nose Pliers
Phillips Screwdriver
Pliers
Trim Removal Tool Set
Wire Stripper
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZbin is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZbin. Use this information at your own risk.
#Frontier #TouchScreen

[@theCircleHook]

I'm shopping for a 2021 frontier and already watching videos on how to upgrade everything 😂. This is a great video! Excellent instructional!

[@mcgurrentertainment]

Thank you!!!

[@michigannation7433]

Great video!! Looking to switch out to a screen is a 06 frontier set up similar still have standard radio

[@urielhernandezvalencia6754]

Nice bro. Thank's for this video.

[@mcgurrentertainment]

Thank you for the support

[@thecocared]

Thank you so much! I was wondering, do you know if this would connect to the camera already installed on my frontier?

[@mcgurrentertainment]

I believe so. You just need to make sure you splice the correct connections.

[@mvo5559]

Bro I been using this video and the video of the Nissan Altima as reference, I have the “wired harness adapter”, the dash kit, antena adapter, but I can’t find any steering wheel control adapters, could you recommend me one, and also do I need any other connection? I am installing this same radio on a Nissan Altima 2014

[@mcgurrentertainment]

May need to contact the vendor to obtain the missing adapters. I'm not sure what else you would need without looking at your setup.

[@mvo5559]

Hey bro I really need help trying to install this same radio but in my Nissan Altima 2014 please give me some help 🙏🏼

[@mcgurrentertainment]

Where are you stuck?

[@mvo5559]

@@mcgurrentertainment well I don’t know all the extra wiring I need to buy, and I don’t know where I have to install the ground cable

[@mcgurrentertainment]

There is a wiring harness link in the description. The ground wire is attached to one of the mounting screws

[@mvo5559]

@@mcgurrentertainment ok thanks a lot

[@StevePatterson-gn8pp]

Can you tell me if it worked with your steering wheel controls?

[@mcgurrentertainment]

Sadly, I'm not able to confirm because this truck doesn't have them. However, according to the radio manual, it is compatible of working with factory steering wheel controls. Wish I could have tested this feature.

[@StevePatterson-gn8pp]

@@mcgurrentertainment TY so much for replying and posting this!!!

[@dennisspry79]

Will a 10” screen units fit 2019 Frontier SV

[@mcgurrentertainment]

Unknown. When I measured the 2009 Frontier, it was ~8in across. So, a 10in will not fit into mine (using the typical installation).

[@erick-xq8gl]

Would this setup work for a 2014 crew cab?

[@mcgurrentertainment]

Possibly. I'm not 100% sure, though.