How To Install A Front Pipe and Cable Bushings - 11th Gen Civic

  Рет қаралды 5,988

Let's Go Sergio

Let's Go Sergio

Күн бұрын

Пікірлер: 33
@druec7970
@druec7970 8 ай бұрын
Love the way u explain everything! Which tools/tool kit do you recommend i buy for a quicker intercooler and charge pipes install on a 11th gen si?
@letsgosergio6128
@letsgosergio6128 8 ай бұрын
Honestly a general wrench kit should be fine BUT i haven’t done those upgrades so i haven’t looked into it. I would look up another youtube who has done it. I will say though having an impact gun was super helpful
@kotastrophie
@kotastrophie Ай бұрын
Thank you only real video I could find that goes through step by step. If you made it without the music it would’ve been a perfect video. Also was there a reason why you only raised 2 wheels off the ground and not all 4? Again thank you
@letsgosergio6128
@letsgosergio6128 Ай бұрын
Thanks for the comment! Honestly it was due to not having another set of stands at the time. It deff made it harder too
@vbucksmaster1019
@vbucksmaster1019 Жыл бұрын
great at explaining things in this video!! best one i’ve seen by far now i can install my front pipe knowing exactly what to do
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
Thanks so much!
@Torquestable
@Torquestable 4 ай бұрын
Did you need to re install the rubber garment holding the front pipe ? The one you said it’s difficult to remove.
@letsgosergio6128
@letsgosergio6128 4 ай бұрын
Hello! Yes I did. Putting it back on wasn’t as difficult because it was already a little loose from when you remove it but it was tough because of the angle. If you can raise the car higher it would probably be easier.
@Torquestable
@Torquestable 4 ай бұрын
@@letsgosergio6128 🤝
@scotth5013
@scotth5013 2 ай бұрын
Great video and explanation, but please use the correct descriptions. You kept calling things “garments” which is another word for clothing items. What you really meant was rubber bushings, rubber hangers, etc.
@letsgosergio6128
@letsgosergio6128 2 ай бұрын
Thanks for letting me know!
@DECKARD263354BR
@DECKARD263354BR Жыл бұрын
Nice video, did you notice any performance differences, torque and acceleration?
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
Not really from the front pipe but you can really tell and hear a difference with the downpipe.
@DECKARD263354BR
@DECKARD263354BR Жыл бұрын
@Let's Go Sergio Thankyou, i would want a front pipe with a high flow cat that doesn't trigger an engine check light save me from needing a tune 😉
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
@@DECKARD263354BR the down pipe from prl doesnt need a tune and i love it. Exhaust is next
@DECKARD263354BR
@DECKARD263354BR Жыл бұрын
@@letsgosergio6128 Thanks dude, all the best with the exhaust install !
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
@@DECKARD263354BR thanks! I dont know which one yet
@virallnick9179
@virallnick9179 Жыл бұрын
Was there a different sound to the exhaust when you installed it before you got the down pipe
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
Yes there was. Before the Downpipe the exhaust had small pops and had a nice sound. After the Downpipe it really comes through and the pops are way bigger and it sounds just better.
@virallnick9179
@virallnick9179 Жыл бұрын
@@letsgosergio6128 thanks brotha I’m running the prl high as well and a bottle resenator with a muffler delete it sounds amazing
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
@@virallnick9179 im thinking of getting the remark exhaust so i can make it really sound good haha
@virallnick9179
@virallnick9179 Жыл бұрын
@@letsgosergio6128 what city do you live in in Florida?
@billwood4873
@billwood4873 Жыл бұрын
Did you smell burning smell after installing it
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
I didnt really look for a different smell but i havent noticed anything
@ZeldaTheMk6
@ZeldaTheMk6 2 жыл бұрын
Just curious did it ever cause your engine light to come on for the front pipe?
@letsgosergio6128
@letsgosergio6128 2 жыл бұрын
It did not m, which I was really happy about!
@letsgosergio6128
@letsgosergio6128 2 жыл бұрын
It did not m, which I was really happy about!
@barry.bessinger
@barry.bessinger 2 жыл бұрын
That was scary seeing you under the car like that. I would suggest buying some ramps and use the ramps and jack stands in combination to work under the car. Much safer IMO . Good work and enjoy your videos .
@letsgosergio6128
@letsgosergio6128 2 жыл бұрын
Thanks so much! Yea, next time for sure ill have to get ramps and stands to be safer.
@wanderbread4217
@wanderbread4217 Жыл бұрын
@@letsgosergio6128 even if you use ramps always put stands underneath for an extra precaution make sure the welds look good on the stands just buy good quality jack stands also
@leonardoarispe4689
@leonardoarispe4689 Жыл бұрын
You never explained how to remove that bushing or install it
@letsgosergio6128
@letsgosergio6128 Жыл бұрын
Hello! Around the 4:00 minute mark is when i show how to remove them. You remove the pin holding them then lift them up.
@chrispeveler1578
@chrispeveler1578 Жыл бұрын
​@letsgosergio6128 what is the purpose of replacing the shift bushings?
Are Polyurethane Bushings Worth It?
13:54
Donut
Рет қаралды 1,4 МЛН
2022 Honda Civic SI 27WON downpipe install - 11th Gen Civic
18:15
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 24 МЛН
Это было очень близко...
00:10
Аришнев
Рет қаралды 7 МЛН
Kluster Duo #настольныеигры #boardgames #игры #games #настолки #настольные_игры
00:47
Mom had to stand up for the whole family!❤️😍😁
00:39
Installing New Acuity Poco Shift Knob
10:58
Let's Go Sergio
Рет қаралды 7 М.
How to STOP BRAKE SQUEAKING in your car (No Squeaks Guaranteed)
13:53
Junky DIY guy
Рет қаралды 3,8 МЛН
PRL Intercooler and Intercooler Piping Install: simple bolt on
25:10
How To Install a Windshield the "Right" Way -EricTheCarGuy
35:23
EricTheCarGuy
Рет қаралды 969 М.
2022 Honda Civic Si Review // A Sensible Hero
19:38
Throttle House
Рет қаралды 1,5 МЛН
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 24 МЛН